Production of Silica from ABU Zaria Dam Sand as an Eco-Friendly Corrosion Inhibitor Using Nanotechnology
- Authors
-
-
Abdulkareem BELLO
Author
-
Yusuf O. ADEIZA
Author
-
Saleh S. LUKMAN
Author
-
Muhammad A. ADAMU
Author
-
Chibuzor A. OKAFOR
Author
-
Abdulaziz A. ABDULSALAM
Author
-
- Keywords:
- Sand, Silica nanoparticles, Eco-friendly, Corrosion inhibitor, Adsorption potential.
- Abstract
-
This research is centered on the production and characterization of silica synthesized from sand collected from the ABU Zaria Dam, assessing its suitability as an eco-friendly corrosion inhibitor, using nanotechnology principles. The sand samples available in abundance were collected, processed and analyzed using Scanning Electron Microscopy (SEM) which revealed irregularly shaped grains surrounded by fine agglomerated particles. EDS (Energy-Dispersive X-ray Spectroscopy) was used to confirmed silica as the dominant constituent, with silicon accounting for 53.52 wt%. Silica nanoparticles were synthesized using a modified sol–gel technique involving alkaline extraction, gel precipitation, washing, and calcinations to produce purified nanoscale silica particles. Fourier Transform Infrared Spectroscopy (FTIR) analysis showed characteristic Si–O asymmetric and symmetric stretching vibrations, alongside O–H and C=O functional groups, indicating the presence of silicate structures and surface hydroxyl species. X-Ray Diffraction (XRD) results showed sharp crystalline quartz peaks together with a broad hump between 20–35°, confirming the coexistence of both crystalline and amorphous silica. The average crystallite size calculated using the Scherrer equation was 20.15 ± 3.96 nm, confirming the nanoscale nature of the prepared silica. The combination of nanosized particles, functional groups with high adsorption potential, and significant silica purity suggests that silica sourced from the ABU Zaria dam has strong potential as a sustainable and environmentally friendly corrosion inhibitor which makes it a viable alternative to conventional toxic corrosion-inhibiting chemicals used in industrial systems. Moreover, the adaption of this material as a corrosion inhibitor will definitely increase the National Gross Domestic Product (GDP and comply with the Federal Government 9th millennium development goals, scalable and affordable to the common citizens.
- References
- Downloads
- Published
- 30-05-2026
- Section
- Articles
- License
-
Copyright (c) 2026 FUDMA Journal of Engineering and Technology

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Oyeyemi T. AFOROLAGBA-BALOGUN, Olumide A. TOWOJU, Characterization of Fuel Produced from Nylon (Polyamide) and Polyethylene Terephthalate (PET) Wastes with Pyrolysis , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Salisu MOHAMMED, Abdulfatai JIMOH, Abdullahi M. EVUTI, Abdulwahab GIWA, Abubakar A. IBRAHIM, Pretreatment and Characterization of Selected Precursors for Chitin/Chitosan Production , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Mohammed A. GANA, Zaka A. MSHELIA, Isuwa S. AJI, Alhaji GUJJA, Lawan A.M. KOLO, Investigation and Comparative Analysis of Natural Moulding Sands from Five Deposits in Maiduguri, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Vincent B. ONIGBARA, Sunday I. AGU, Muftau A. GBENLE, Metal-Based Biomaterials for Clinical Implant Applications: Materials and Performance – A Review , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Oluwaseun S. OGUNGBEMI, Geophysical Approach to Groundwater Resource Appraisal in Afe Babalola University, Ado-Ekiti, Southwestern Nigeria , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Ibrahim BALA, Solomon M. DAUDA, Audu A. BALAMI, Peter A. IDAH, Design Analysis of a Kenaf Decorticating Machine , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Sheidu S. ONIMISI, Usman B. ABDULLAHI, Hayatudden S. BARAYAIS, Abubakar M. MUHAMMAD, Abubakar G. ISAH, Abubakar S. MOHAMMED, Mohammed U. GARBA, Safety Evaluation of Orifice Plate in Natural Gas Pipeline using Computer Aided Engineering (CAE): A Step Towards Food Security , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Danladi K. GARBA, Emmanuel O. AWEDA, Nuhu A. ADEMOH, Fredrick NGOLEMASANGO, Pascal A. UBI, Akor TERNGU, Lawal KABIR, Shuaibu O. YAKUBU, The Effects of Gum Arabic Matrix on the Hardness and Water Absorption of Agro-Based (Banana Pseudostem) Hybrid Composites , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Taiwo J. DURODOLA, Suleiman ZUBAIR, James AGAJO, Open Radio Access Network (ORAN) Deployment Strategies for Remote Areas , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Abba M. BALA, Abdurrauf G. SHARIFAI, Umar S. HARUNA, A Hybrid Deep Learning Model for Efficient Anomaly Detection in Video Surveillance Systems , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
You may also start an advanced similarity search for this article.
