Production of Silica from ABU Zaria Dam Sand as an Eco-Friendly Corrosion Inhibitor Using Nanotechnology
- Authors
-
-
Abdulkareem BELLO
Author
-
Yusuf O. ADEIZA
Author
-
Saleh S. LUKMAN
Author
-
Muhammad A. ADAMU
Author
-
Chibuzor A. OKAFOR
Author
-
Abdulaziz A. ABDULSALAM
Author
-
- Keywords:
- Sand, Silica nanoparticles, Eco-friendly, Corrosion inhibitor, Adsorption potential.
- Abstract
-
This research is centered on the production and characterization of silica synthesized from sand collected from the ABU Zaria Dam, assessing its suitability as an eco-friendly corrosion inhibitor, using nanotechnology principles. The sand samples available in abundance were collected, processed and analyzed using Scanning Electron Microscopy (SEM) which revealed irregularly shaped grains surrounded by fine agglomerated particles. EDS (Energy-Dispersive X-ray Spectroscopy) was used to confirmed silica as the dominant constituent, with silicon accounting for 53.52 wt%. Silica nanoparticles were synthesized using a modified sol–gel technique involving alkaline extraction, gel precipitation, washing, and calcinations to produce purified nanoscale silica particles. Fourier Transform Infrared Spectroscopy (FTIR) analysis showed characteristic Si–O asymmetric and symmetric stretching vibrations, alongside O–H and C=O functional groups, indicating the presence of silicate structures and surface hydroxyl species. X-Ray Diffraction (XRD) results showed sharp crystalline quartz peaks together with a broad hump between 20–35°, confirming the coexistence of both crystalline and amorphous silica. The average crystallite size calculated using the Scherrer equation was 20.15 ± 3.96 nm, confirming the nanoscale nature of the prepared silica. The combination of nanosized particles, functional groups with high adsorption potential, and significant silica purity suggests that silica sourced from the ABU Zaria dam has strong potential as a sustainable and environmentally friendly corrosion inhibitor which makes it a viable alternative to conventional toxic corrosion-inhibiting chemicals used in industrial systems. Moreover, the adaption of this material as a corrosion inhibitor will definitely increase the National Gross Domestic Product (GDP and comply with the Federal Government 9th millennium development goals, scalable and affordable to the common citizens.
- References
- Downloads
- Published
- 30-05-2026
- Section
- Articles
- License
-
Copyright (c) 2026 FUDMA Journal of Engineering and Technology

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Chukwuemeka S. IBEH, Abubakre O. KAMARDEEN, Saka A. ABDULKAREEM, Aliyu A. ABDULLAHI, Experimental Study on the Characterisation and Thermo-Physical Properties of Graphene-Agro Based Hybrid Nanofluids , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Abubakar A. IBRAHIM, Fatimah Y. GARBA, Fatimah A. MUHAMMAD, Ismail B. ADEFESO, Bello A. ISAH, Jacob OLAYIWOLA, Industrial and Biomedical Applications Biobased Polymers of Polylactic Acid and Polyhydroxybutyrate: A Review , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Mathew O. ADEOTI, Victor N. HARUNA, Omolayo M. IKUMAPAYI, Timothy A. ADEKANYE, Development and Characterization of Epoxy-Based Asbestos-Free Brake Pad Composites Reinforced with Cow Hoof Particulates , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Adekunle A. YEKINNI, Adeniyi O. ADESINA, Kazeem A. BELLO, Effect of Subcritical Tempering on the Microstructural, Mechanical and Corrosion Behaviour of Mild Steel , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Bala I. ABDULKARIM, Umar IDRISS, Synthesis and Characterization of Laggera aurita-Derived KOH Activated Carbon (LAKOHAC) and Role for the Adsorption of Water-Soluble Fraction of Benzene (WSFB) in Oil-Spilled Water , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Sirajo ALHASSAN, Abdullahi A. ADAMU, Mohammed T. JIMOH, Experimental Characterization and Seasonal Energy Potential Assessment of Municipal Solid Waste in Kano City, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Koliya LAAYE, Solomon O. OGUCHE, Ibrahim I. JIDDA, Abdullahi A. ADAMU, Economic Viability of Waste-to-Energy: Pathways for Sustainable Power Generation in Jalingo, Taraba State, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Oluwaseun S. OGUNGBEMI, Aquifer Characterisation and Vulnerability Assessment in a Typical Basement Complex Terrain , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Vincent B. ONIGBARA, Sunday I. AGU, Muftau A. GBENLE, Metal-Based Biomaterials for Clinical Implant Applications: Materials and Performance – A Review , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Oluwaseun S. OGUNGBEMI, Geophysical Approach to Groundwater Resource Appraisal in Afe Babalola University, Ado-Ekiti, Southwestern Nigeria , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
You may also start an advanced similarity search for this article.
