Data-Driven Observability Enhancement in Active Distribution Networks via Optimal Co-Deployment of DGs and D-PMUs Using Hybrid APSO-ASDA
- Authors
-
-
Mela I. L. LASHIRU
Author
-
Ganiyu A. BAKARE
Author
-
Sabo M. HASSAN
Author
-
Kamilu O. LAWAL
Author
-
- Keywords:
- Active Distribution Network, D-PMU, Observability, Data-Driven Control, APSO, ASDA, Distribution System State Estimation, Rate-of-Change of Frequency ROCOF.
- Abstract
-
The increasing deployment of renewable Distributed Generators (DGs) introduces operational uncertainty and observability challenges in Active Distribution Networks (ADNs). Traditional Supervisory Control and Data Acquisition (SCADA) systems lack the temporal resolution required for real-time monitoring. This paper proposes a data-driven framework for enhancing network observability through optimal co-deployment of DGs and Distribution Phasor Measurement Units (D-PMUs) using a hybrid Accelerated Particle Swarm Optimization-Adaptive Spiral Dynamic Algorithm (APSO-ASDA). The objective is to maximize network observability with minimal measurement redundancy for improved Distribution System State Estimation (DSSE). Simulation results on the IEEE 13-bus ADN, modeled in MATLAB Simulink R2023b, showed ASDA optimal DG -D-PMU placement at buses 1, 4, with corresponding sizes of 340Kw(solar), and 445kW(wind) with D-PMU at 6, 7, 10, and 12. APSO DG placement is at bus 3 and 4 with a size of 60kW(solar), 400kW(wind), D-PMU at buses 6, 8, 9. The hybrid approach places DG at buses 1 and 3 with corresponding capacities of 110kW (solar) and 250kW (wind), and D-PMU allocation at buses 4, 6, 7, 8, 11 and 12. The hybrid algorithm achieved a rapid reduction in the cost function from 278.7 to 81.14 within the first 36 iterations, highlighting its effectiveness for real-time, data-driven applications.
- References
- Downloads
- Published
- 23-05-2026
- Section
- Articles
- License
-
Copyright (c) 2026 FUDMA Journal of Engineering and Technology

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Idris M. WADA, Abba IBRAHIM, Genesis ISHAYA, Performance Evaluation of Climate Products with Validation Using Bootstrapping and Climate Extremes in the Hadejia-Jama’are River Basin, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Osemwegie IKPONMWOSA-EWEKA, Alexander I. IDEMUDIA, Predicting Convective Heat Transfer Coefficient in TIG Welding via Adaptive Neuro-Fuzzy Inference System (ANFIS) , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Tolulope S. FAWALE, Monday O. IMAFIDON, Chukwuemeka P. OGBU, Adoption of Non-Financial Motivational Strategies for Enhancing Productivity on Construction Sites in Edo State, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Francis O. BOROKINNI, Olarewaju T. OGINNI, Ridwan O. RAJI, Kolawole ALONGE, Effects of Quenching Media and Heat Transfer Rate on the Hardness and Microstructure of Low-Carbon Steel , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Luqman K. SALATI, Sani D. MUHAMMAD, Jacob T. ADEYEMO, Simulation of Trucks Haulage Operation at Ashaka Cement Company in Gombe State, North-Eastern Nigeria , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Mukhtar N. YAHYA, Sohaib ALHAJHUSSEIN, Wastewater Analysis Using Kubota Membrane Bioreactor System , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Paul A. OMALE, Hammed O. SALAUDEEN, Sunday S. IGILA, Enoch T. CHIN, Determination of the Physicochemical Composition of Processed Powdered Pepper (Capsicum spp.) Sold in Selected Markets in Makurdi, Benue State, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Shamsuddeen J. AHMAD, Saifullahi S. SADI, Muhammad M. AHMAD, Abdullahi D. UMAR, Shamsuddeen USMAN, Comparative Analysis of Machine Learning Algorithms for the Detection and Classification of Suspicious Emails , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Olawale J. OLALUYI, Johnson O. ADEOGO, Adeniyi O. AJIBOYE, Mayowa O. ORESELU, Olarewaju T. OGINNI, Application of Machine Learning for Enhancing Fake Logo Detection , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Sirajo ALHASSAN, Abdullahi A. ADAMU, Mohammed T. JIMOH, Multi-Criteria Decision Analysis and Optimization Approaches in Sustainable Waste-to-Energy Planning: A Systematic Review , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
You may also start an advanced similarity search for this article.
Most read articles by the same author(s)
- Emmanuel T. ODEYEMI, Ya’u S. HARUNA, Ganiyu A. BAKARE, Hassan B. MAMMAN, Sabo M. HASSAN, BAT-Optimized PID and ANFIS Torque-Based MPPT for a 0.5 MW PMSG-Based Wind Energy Conversion System Under Dynamic Wind Conditions , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Emmanuel T. ODEYEMI, Ya’u S. HARUNA, Ganiyu A. BAKARE, Hassan B. MAMMAN, Sabo M. HASSAN, Software-in-the-Loop Validation of an Adaptive Particle Swarm Optimization-Based MPPT Controller for Real-Time Photovoltaic System , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Umar A. ADAMU, Ya’u S. HARUNA, Ganiyu A. BAKARE, Buhari H. MAMMAN, Kunduli MUSTAPHA, Hadi M. ADAMU, Ismaila MAHMUD, Design and Simulation of a 200 MWp Floating Solar PV Plant Integrated with the Kainji Hydropower Plant, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
