Performance Evaluation and Design Analysis of Hybrid Constructed Wetlands for Aquaculture Effluent Treatment under Tropical Conditions
- Authors
-
-
Paramdi S. ABARI
Author
-
Abdulwahab O. AUDU
Author
-
Ahmad-Tijani USMAN
Author
-
Charity T. METIBOBA
Author
-
Peter O. ANIKOH
Author
-
- Keywords:
- Hybrid constructed wetlands, aquaculture wastewater, horizontal subsurface flow, vertical subsurface flow, pollutant removal efficiency, sustainable wastewater treatment.
- Abstract
-
Aquaculture wastewater discharge has become a significant environmental concern because of the release of nutrient-rich effluents into natural water bodies. This study evaluated the treatment performance and design efficiency of a laboratory-scale hybrid constructed wetland (HCW) system developed for aquaculture effluent treatment under tropical climatic conditions. The hybrid system consisted of horizontal subsurface flow (HSSF) and vertical subsurface flow (VSSF) wetland units operated under planted and unplanted conditions using Sacciolepis africana as the test macrophyte. Aquaculture wastewater was collected from Musgola Fish Farm located in Minna, Niger State, Nigeria, and monitored over a 23-week experimental period. Physicochemical parameters including biological oxygen demand (BOD5), chemical oxygen demand (COD), total suspended solids (TSS), total dissolved solids (TDS), total nitrogen (TN), sulphate (SO4²⁻), and calcium (Ca²⁺) were analyzed using standard APHA methods. Hydraulic retention time, hydraulic loading rate, porosity, and wetland dimensions were incorporated into the wetland design calculations. Results showed that the planted VSSF unit recorded the highest pollutant removal efficiencies of 90.1% for BOD5, 88.2% for COD, 77.7% for TSS, 58.2% for TDS, and 57.4% for TN. Statistical analysis using one-way ANOVA indicated significant differences (p < 0.05) between planted and unplanted systems. The study demonstrates that hybrid constructed wetlands provide an efficient, low-cost, and environmentally sustainable technology for aquaculture wastewater treatment in developing countries.
- References
- Downloads
- Published
- 23-05-2026
- Section
- Articles
- License
-
Copyright (c) 2026 FUDMA Journal of Engineering and Technology

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Iliya D. IBRAHIM, Suleiman A. BABALE, Sani H. LAWAN, Auwal A. ABUBAKAR, Design of a Modified Wideband Microstrip Patch Antenna for WLAN/WiMAX Applications , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Michael R. ADU, Afeez O. OLAWUNMI, Design and Implementation of an IoT-Based Smart Attendance System , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Nnamdi S. OKOMBA, Adedayo A. SOBOWALE, Adebimpe O. ESAN, Bolaji A. OMODUNBI, Taiwo A. AWOYEMI, Development of a High Blood Pressure and Hypoxemia Measuring Device , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Emmanuel T. ODEYEMI, Ya’u S. HARUNA, Ganiyu A. BAKARE, Hassan B. MAMMAN, Sabo M. HASSAN, BAT-Optimized PID and ANFIS Torque-Based MPPT for a 0.5 MW PMSG-Based Wind Energy Conversion System Under Dynamic Wind Conditions , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Muhammad M. HAMIDU, Mathew KATAMBI, Omar FARUQ, Techno-Economic and Environmental Assessment of a Solar PV-Based Microgrid for Residential Electrification in Gwange I, Maiduguri Using HOMER Pro , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Nnamdi S. OKOMBA, Adedayo A. SOBOWALE, Adebimpe O. ESAN, Bolaji A. OMODUNBI, Taiwo A. AWOYEMI, Development of an Intelligent-Based Elevator System , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Ameh RICHARD, Sani B. MUHAMMAD, Terver AUSE, Umar SHEHU, Assessment of the Suitability of Wusasa Clay for Refractory Bricks Production , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Samuel O. OLADIPUPO, Dominic S. NYITAMEN, Lanre S. MOJEREOLA, Design, Simulation and Fabrication of a Slot Loaded 2.45 GHz Microstrip Patch Antenna for ISM Band Wireless Applications , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Abdulkareem BELLO, Yusuf O. ADEIZA, Saleh S. LUKMAN, Muhammad A. ADAMU, Chibuzor A. OKAFOR, Abdulaziz A. ABDULSALAM, Production of Silica from ABU Zaria Dam Sand as an Eco-Friendly Corrosion Inhibitor Using Nanotechnology , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Olatunde A. AKANO, Wariz A. ISMAEL, Ayomikun A. AWOSEYI, Femi AYO, Ifeoluwa M. OLANIYI, Jide E.T. AKINSOLA, Short Messaging Service Spam Detection Model Using Natural Language Processing and Deep Learning Techniques , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
You may also start an advanced similarity search for this article.
