Geotechnical Evaluation of Lateritic Soil Index Properties in Ekiti State Districts, Southwestern Nigeria for Road Pavement Construction
- Authors
-
-
Joshua T. AKINWAMIDE
Author
-
Jacob O. EHIOROBO
Author
-
Oluwayinka G. AKINWAMIDE
Author
-
- Keywords:
- Consistency tests, Grain size analysis, Lateritic soils, Road pavement construction, Specific gravity tests.
- Abstract
-
Focusing on the three Senatorial Districts of Ekiti State, this research examines local soil properties to assess their suitability for construction and infrastructure development. The investigation starts by analysing samples from the Central District, Southern, and Northern with a sample size of 160 per district, the research utilized standard laboratory procedures to assess key physical properties. Specifically, tests were performed to evaluate moisture content, specific gravity, and grading, alongside an analysis of Atterberg limits. Based on the AASHTO classification system, the soils in the Central District were classified into four categories (A-2-4, A-2-6, A-2-7, A-7-5), while the Southern District contained eight categories (A-2-4, A-2-5, A-2-6, A-2-7, A-4, A-5, A-6, A-7-5), and the Northern District had six categories (A-2-4, A-2-5, A-2-6, A-2-7, A-6, A-7-6). Results show that while Central District soils meet the requirements for base and sub-base layers, those from the Southern and Northern Districts are more effectively utilized in sub-base and sub-grade construction. Although stabilization may be needed to enhance their performance. In conclusion, the soils of Ekiti State are generally suitable for civil engineering purposes, with the Central District offering the most reliable materials for foundational, pavement, and construction projects.
- References
- Downloads
- Published
- 15-05-2026
- Section
- Articles
- License
-
Copyright (c) 2026 FUDMA Journal of Engineering and Technology

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Abdulkarim AMINU, Mohammed ALIYU, Ibrahim S. MOHAMMED, Iyanda M. ANIMASHAUN, Peter DANIEL, Mohammad USMAN, Production and Optimisation of Parameters for Density and Ash Content of Briquettes Produced from Sorghum Stalks and Groundnut Shells Using African Locust Bean (Parkia biglobosa) Pulp as a Binding Agent , FUDMA Journal of Engineering and Technology: Vol. 1 No. 1 (2025): July 2025
- Mohammed K. BASHIR, Sanusi A. DARMA, Usman MAHMUD, Mansir ABUBAKAR, Enhanced Breast Cancer Classification Using Ensemble Learning and Data Resampling Techniques: A Machine Learning Approach , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Danladi K. GARBA, Emmanuel O. AWEDA, Nuhu A. ADEMOH, Fredrick NGOLEMASANGO, Pascal A. UBI, Akor TERNGU, Lawal KABIR, Shuaibu O. YAKUBU, The Effects of Gum Arabic Matrix on the Hardness and Water Absorption of Agro-Based (Banana Pseudostem) Hybrid Composites , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Opeyemi O. ASAOLU, Oluwasanmi S. ADANIGBO, Temidayo J. AKINDAHUNSI, Advances in Privacy Preservation Techniques for Mobile Ad Hoc Networks: A Review , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Mordecai C. EZEALOR, Bosede A. ORHEVBA, Ruth O. OYEBAMIJI, Quality Evaluation of Yogurt Produced from Chili Pepper-Derived Starter Culture , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Caleb A. ABORISADE, Jide E.T. AKINSOLA, Ifeoluwa M. OLANIYI, Fathia O. ONIPEDE, Emmanuel A. OLAJUBU, Ganiyu A. ADEROUNMU, Machine Learning-Based Polycystic Ovary Syndrome Generative Modelling via Ensemble Learning and Neural Networks for Infertility Prediction , FUDMA Journal of Engineering and Technology: Vol. 1 No. 1 (2025): July 2025
- Shamsuddeen J. AHMAD, Saifullahi S. SADI, Muhammad M. AHMAD, Abdullahi D. UMAR, Shamsuddeen USMAN, Comparative Analysis of Machine Learning Algorithms for the Detection and Classification of Suspicious Emails , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Anthony U. AINETOR, Martins ILEVBARE, Machine Fabrication Student’s Self-Esteem and Interest in Career Choice as Correlates of their Entrepreneurial Intention in Nigerian Universities , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Christopher C. NWAOGU, Nnamdi AHUCHAOGU, Reducing Electromagnetic Radiation Around the Fourth Generation Base Stations , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Koliya LAAYE, Solomon O. OGUCHE, Ibrahim I. JIDDA, Abdullahi A. ADAMU, Economic Viability of Waste-to-Energy: Pathways for Sustainable Power Generation in Jalingo, Taraba State, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
You may also start an advanced similarity search for this article.
