Performance Evaluation of Pervious Concrete Containing Glass Cullet and Glass Powder for Sustainable Construction
- Authors
-
-
Afeez A. AWOLOKUN
Author
-
Olusegun O. ALUKO
Author
-
Temitope F. AWOLUSI
Author
-
Mayowa A. OGIDI
Author
-
- Keywords:
- Pervious concrete, glass cullet, glass powder, sustainable construction, compressive strength.
- Abstract
-
The utilization of waste materials in concrete production has gained significant attention due to its potential for sustainable construction and environmental conservation. This study evaluates the performance of pervious concrete incorporating glass cullet as partial replacement fo r coarse aggregate and glass powder as supplementary cementitious material. The experimental program investigated the physical and mechanical properties of the materials, as well as compressive strength, abrasion resistance, water absorption, and permeability of the produced mixes. Results indicate that up to 20% replacement of cement with glass powder improved compressive strength due to its pozzolanic activity, while glass cullet effectively replaced natural aggregates without adversely affecting workability. Pervious concrete with glass powder demonstrated reduced porosity and enhanced durability compared to control mixes. The findings suggest that integrating waste glass into pervious concrete not only improves mechanical and durability properties but also offers a sustainable solution for waste management and eco-friendly construction.
- References
- Downloads
- Published
- 27-04-2026
- Section
- Articles
- License
-
Copyright (c) 2026 FUDMA Journal of Engineering and Technology

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Aminu D. MAHMUD, Imran N. IBRAHIM, Development and Optimization of Starch-Based Bioplastics from Millet and Cassava Using Mixture Design Approach , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Zaharaddeen MUSA, Aliyu BELLO, Haris A. DANLADI, Design and Construction of Dual Input Mobile Solar Generator for Reliable Off-Grid Power , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Ozovehe A. ALIYU, Tasiu A. SULAIMAN, Jibrin M. KAURA, Idris ABUBAKAR, Amana OCHOLI, Effects of Fire-Retardant Treatment, Fire Scenarios, and Face Orientation on the Charring Behaviour of Indigenous Timber Species , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Usman GARBA, Abdullahi ADAMU, Mamuda MUHAMMAD, Physicochemical Characterisation of Mineral Sands from Northwestern Nigeria for Industrial Applications , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Tolulope S. FAWALE, Monday O. IMAFIDON, Chukwuemeka P. OGBU, Adoption of Non-Financial Motivational Strategies for Enhancing Productivity on Construction Sites in Edo State, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Usman HASSAN, An Assessment of Management Support Provided to Construction Equipment Operators Regarding Safety Practices and Protocols in Nigeria , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Habibat O. YUSUFU, Yakubu D. MOHAMMED, Rose JONATHAN, Shamsuddeen SULAIMAN, Impact of Health and Safety Management on Safety Performance of Small and Medium-Sized Construction Firms in Abuja , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Oluwadare J. AKINDUGBAGBE, Adefope OWOJORI, Emmanuel AGBENYI, Babatunde ADEBO, Gamma Shielding Capabilities of Some Selected Materials Within Ibadan Metropolis , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- George AKWEC, Segun E. ADEBAYO, Caroline O. ALENOGHENA, Design and Construction of Forced-Air Heating systems for Poultry Brooding: A Comprehensive Review , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Muhammad B. MUHAMMAD, Noor S. B. MANSOR, Fariha R. KHAN, Investigating Breakdown Strength Based on Trapping Profile in Cross-Linked Polyethylene (XLPE) Nanocomposites , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
You may also start an advanced similarity search for this article.
