Performance Evaluation of Pervious Concrete Containing Glass Cullet and Glass Powder for Sustainable Construction
- Authors
-
-
Afeez A. AWOLOKUN
Author
-
Olusegun O. ALUKO
Author
-
Temitope F. AWOLUSI
Author
-
Mayowa A. OGIDI
Author
-
- Keywords:
- Pervious concrete, glass cullet, glass powder, sustainable construction, compressive strength.
- Abstract
-
The utilization of waste materials in concrete production has gained significant attention due to its potential for sustainable construction and environmental conservation. This study evaluates the performance of pervious concrete incorporating glass cullet as partial replacement fo r coarse aggregate and glass powder as supplementary cementitious material. The experimental program investigated the physical and mechanical properties of the materials, as well as compressive strength, abrasion resistance, water absorption, and permeability of the produced mixes. Results indicate that up to 20% replacement of cement with glass powder improved compressive strength due to its pozzolanic activity, while glass cullet effectively replaced natural aggregates without adversely affecting workability. Pervious concrete with glass powder demonstrated reduced porosity and enhanced durability compared to control mixes. The findings suggest that integrating waste glass into pervious concrete not only improves mechanical and durability properties but also offers a sustainable solution for waste management and eco-friendly construction.
- References
- Downloads
- Published
- 27-04-2026
- Section
- Articles
- License
-
Copyright (c) 2026 FUDMA Journal of Engineering and Technology

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Koliya LAAYE, Solomon O. OGUCHE, Ibrahim I. JIDDA, Abdullahi A. ADAMU, Economic Viability of Waste-to-Energy: Pathways for Sustainable Power Generation in Jalingo, Taraba State, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Oluyemi S. ONIFADE, Olusegun O. AJIDE, Development and Performance Evaluation of a Semi-Automated Impact Fracture Tester , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Zaharaddeen MUSA, Aliyu BELLO, Haris A. DANLADI, Design and Construction of Dual Input Mobile Solar Generator for Reliable Off-Grid Power , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Mu’azu ABUBAKAR, Abubakar B. ALIYU, Dauda GARBA, Fabrication, Characterization, and Application of Clay-Based Ceramic Membranes for Oily Wastewater Treatment: A Review , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Tolulope S. FAWALE, Monday O. IMAFIDON, Chukwuemeka P. OGBU, Adoption of Non-Financial Motivational Strategies for Enhancing Productivity on Construction Sites in Edo State, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Oluwadare J. AKINDUGBAGBE, Adefope OWOJORI, Emmanuel AGBENYI, Babatunde ADEBO, Gamma Shielding Capabilities of Some Selected Materials Within Ibadan Metropolis , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Mohammed A. GANA, Zaka A. MSHELIA, Isuwa S. AJI, Alhaji GUJJA, Lawan A.M. KOLO, Investigation and Comparative Analysis of Natural Moulding Sands from Five Deposits in Maiduguri, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Abdullahi P. NUHU, Kabir O. YUSUF, Aliyu O. ABDULRAHMAN, Kehinde A. LASISI, Effect of Heat Treatment on Post Weld Railway Track , FUDMA Journal of Engineering and Technology: Vol. 1 No. 1 (2025): July 2025
- Sirajo ALHASSAN, Abdullahi A. ADAMU, Mohammed T. JIMOH, Multi-Criteria Decision Analysis and Optimization Approaches in Sustainable Waste-to-Energy Planning: A Systematic Review , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Oyeyemi T. AFOROLAGBA-BALOGUN, Olumide A. TOWOJU, Characterization of Fuel Produced from Nylon (Polyamide) and Polyethylene Terephthalate (PET) Wastes with Pyrolysis , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
You may also start an advanced similarity search for this article.
