Simulation of Trucks Haulage Operation at Ashaka Cement Company in Gombe State, North-Eastern Nigeria
- Authors
-
-
Luqman K. SALATI
Author
-
Sani D. MUHAMMAD
Author
-
Jacob T. ADEYEMO
Author
-
- Keywords:
- Initial void ratio, natural moisture content, settlement, compression ratio, one-dimensional consolidation.
- Abstract
-
This study examined the simulation of truck haulage operation at Ashaka Cement Company in Ashaka, Gombe State, North-eastern Nigeria. Data collected included cycle time, tonnage of limestone produced and truck capacity. Field data plotted on Microsoft Excel software was used in generating prediction equations through polynomial model expressions. The model was then validated using historical data of truck haulage, and subsequently simulated. Results of the study showed that the optimum cycle time of North-North pit was 39 minutes long, producing 7587 tonnes per day, the cycle time for the North-West pit was 26 minutes, peaking 8100 tonnes per day; and the South-West pit cycle time, lasted 19 minutes and reaching up to 8640 tonnes per day respectively. The findings imply that truck haulage operation in the company has attained optimum production. To sustain this feat, it was recommended that hindrances to production such as boulders hook (over size), buildup of wet material and cleaning-associated delays (rollers, affront feeder) should be minimised to the bearest minimum.
- References
- Downloads
- Published
- 15-04-2026
- Section
- Articles
- License
-
Copyright (c) 2026 FUDMA Journal of Engineering and Technology

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Ismaila MAHMUD, Mahmud MUSTAPHA, Sulaiman H. SULAIMAN, Ibrahim ABDULWAHAB, Ibrahim A. SHEHU, Aminu J. ALIYU, Yusuf S. ABU, Nuraddeen A. ILIYASU, Solar Irradiance Forecast using Feed Forward Neural Network: A Case Study of Zaria Town , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Kazeem A. BELLO, Adeniyi O. ADESINA, Lukman A. OPEYEMI, Solomon O. UVIASE, Francis O. BOROKINNI, Friday ONUH, Tunde O. OGUNDANA, Adebayo I. OLUMOROTI, Developments and Applications of Additive Manufacturing in the Automotive Industry , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Tina I. FRANCIS-AKILAKI, Onimi O. ASHAMA, Raymond A. EKEMUBE, Vibration Analysis as a Transformative Approach to Condition-Based Monitoring , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Bala I. ABDULKARIM, Phebe O. JAMES, Utilization of Microbial Fuel Cells for Electricity Generation from Gwagwalada Abattoir Wastewater , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Samuel E. CHUKWU, Martins Y. OTACHE, Precious O. ATEMOAGBO, Emmanuel O. AGBESE, Copula-Based Modelling of Drought Severity-Duration-Frequency Relationship of Sokoto-Rima-River Basin, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Kayode A. IDOWU, Favour O. BENJAMIN, Emmanuel B. SAMANI, Assessment of Vibration and Noise Impacts of Drilling and Blasting Operations on Urban Structures: A Case Study of Zeberced Quarry, Abuja , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Dandison M. WALI, Beabu B. DUMKHANA, Raymond A. EKEMUBE, Silas O. NKAKINI, Smart Assessment of Tractor Noise Levels During Tillage Operation , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Sulaiman Y. ADAMU, Fadimatu N. DABAI, Abdulazeez Y. ATTA, Baba Y. JIBRIL, Preparation and Characterization of Enhanced Hierarchical Zn-Ni/HZSM-5 Catalysts for Potential use in Catalytic reactions to Upgrade Bio-Oil and Hydrogen from Biomass Pyrolysis , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
You may also start an advanced similarity search for this article.
