Simulation of Trucks Haulage Operation at Ashaka Cement Company in Gombe State, North-Eastern Nigeria
- Authors
-
-
Luqman K. SALATI
Author
-
Sani D. MUHAMMAD
Author
-
Jacob T. ADEYEMO
Author
-
- Keywords:
- Initial void ratio, natural moisture content, settlement, compression ratio, one-dimensional consolidation.
- Abstract
-
This study examined the simulation of truck haulage operation at Ashaka Cement Company in Ashaka, Gombe State, North-eastern Nigeria. Data collected included cycle time, tonnage of limestone produced and truck capacity. Field data plotted on Microsoft Excel software was used in generating prediction equations through polynomial model expressions. The model was then validated using historical data of truck haulage, and subsequently simulated. Results of the study showed that the optimum cycle time of North-North pit was 39 minutes long, producing 7587 tonnes per day, the cycle time for the North-West pit was 26 minutes, peaking 8100 tonnes per day; and the South-West pit cycle time, lasted 19 minutes and reaching up to 8640 tonnes per day respectively. The findings imply that truck haulage operation in the company has attained optimum production. To sustain this feat, it was recommended that hindrances to production such as boulders hook (over size), buildup of wet material and cleaning-associated delays (rollers, affront feeder) should be minimised to the bearest minimum.
- References
- Downloads
- Published
- 15-04-2026
- Section
- Articles
- License
-
Copyright (c) 2026 FUDMA Journal of Engineering and Technology

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Omokhafe J. TOLA, James G. AMBAFI, Emmanuel C. OBUAH, Isah N. ABUBAKAR, Mutiat S. YISA, Development of Energy-Aware Hamiltonian-Based Fixed-Time Chaos Control and Synchronisation of Brushless DC Motor for Electric Vehicle Application , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Oluyemi S. ONIFADE, Olusegun O. AJIDE, Development and Performance Evaluation of a Semi-Automated Impact Fracture Tester , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Ayobami O. IDOWU, Integration of Green Technologies for Sustainable Facility Management of Public Buildings in Edo State, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Muhammad N. IBRAHIM, Abubakar S. MOHAMMED, Iyanda M. ANIMASHAUN, Shehu ABDULKADIR, Sensor-Based Real-Time Soil Macronutrient Monitoring and Variable-Rate Fertilizer Application Machinery , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Mohammed U. GARBA, Musa A. ABDULLAHI, Isah RABI, Saadatu A. GORO, Habibu UTHMAN, Abubakar S. MOHAMMED, Umaru AHMADU, Usman S. ONODUKU, Recovery of Lithium Carbonate from Nigerian Lepidolite Ore via Roasting-Leaching-Precipitation , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Mukhtar N. YAHYA, Sohaib ALHAJHUSSEIN, Wastewater Analysis Using Kubota Membrane Bioreactor System , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Sani MAMOUDOU, Abdulmumin A. SHUAIBU, Aliyu USMAN, Evaluation of Nano-Hydroxyapatite/Nano-Kaolin Composite Additives on the Physical Properties of Hot Mix Asphalt Binder , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Chibuzor A. OKAFOR, Bello ABDULKAREEM, Najeem A. YEKEEN, Blessing A. OSULOYE, Yakubu O. HASSAN, Musa J. MAIKATO, Evaluation of the Effects of Charcoal Particle Sizes on Carburized Low Carbon Steel , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Peter EDOKA, Assessment of the Role of Kogi State Government in Flood Mitigation in Lokoja, Kogi State, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Tahiru MOHAMMED, Muhammad B. MAINA, Abba B. MUHAMMAD, Muhammad SHUWA, From Local Sand to Functional Silicon: An Integrated Pathway for Producing Photovoltaic-Grade Material from Nigerian Silica Sand , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
You may also start an advanced similarity search for this article.
