Design and Implementation of a BLE 5.0-Enabled Wearable Finger Mouse Using the XIAO nRF52840 Platform
- Authors
-
-
Suleiman ZUBAIR
Department of Telecommunication Engineering, Federal University of Technology, Minna, Nigeria
Author
-
Hassan ABDULAZEEZ
Department of Cyber security Science, Federal University of Technology, Minna, Nigeria
Author
-
Bala A. SALIHU
Department of Telecommunication Engineering, Federal University of Technology, Minna, Nigeria
Author
-
Abubakar A. SHUAIBU
Department of Electrical and Electronics Engineering, Abdullahi Fodio University of Science and Technology, Aliero, Nigeria
Author
-
- Keywords:
- Wearable HCI, finger mouse, BLE HID, XIAO nRF52840, joystick interface, 3D printing, low-power design.
- Abstract
-
This paper presents the design, implementation, and evaluation of a compact, ring-worn human–computer interface (HCI) device—termed the FingerMouse—that enables wireless cursor control via thumb-operated joystick input. The system uses the Seed Studio XIAO nRF52840, an ultra-compact microcontroller with native Bluetooth Low Energy (BLE) 5.0 support, to implement a standards-compliant Human Interface Device (HID) profile. This approach eliminates the need for proprietary drivers and provides plug-and-play compatibility across Windows, macOS, and Android platforms. The device operates in two modes: (1) directional cursor movement with left-click actuation, and (2) scroll-wheel emulation with deep-sleep power management. Housed in a custom 3D-printed ring (25 mm inner diameter, <15 g mass) and powered by a 90 mAh LiPo battery, the prototype achieves an average active current draw of 7.2 mA, deep-sleep consumption of <1 µA, and a usable battery life of 4.1 hours. Experimental validation with ten participants confirmed reliable operation, low latency (28 ± 5 ms), and high ergonomic comfort during extended use. This work demonstrates a low-cost, open-hardware solution that advances wearable HCI through miniaturisation, energy efficiency, and seamless OS integration.
- References
- Downloads
- Published
- 25-03-2026
- Section
- Articles
- License
-
Copyright (c) 2026 FUDMA Journal of Engineering and Technology

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Ruth R. ADELAJA, Rhoda I. ADELAJA, Henry OTOBRISE, Adefope OWOJORI, Babatunde ADEBO, Investigation of Indoor Radiation Levels within Lead City University’s Academic Buildings , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Ojochide P. DAMIAN, Fadimatu N. DABAI, Abdulwasiu ABDURRAHMAN, Kamiludeen OLANREWAJU, Bilyamin ABDULMUMIN, Grace A. OLUGBENGA, A Simulation-Driven Strategy for Improved Expandable Polystyrene Synthesis via Multi-Stage Initiator Dosing , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Emma S. EKPO, Mokọ́ládé JOHNSON, Constructing Meaning and Enhancing Well-Being: The Role of Place Attachment, Place Identity, and Sense of Place in Architectural Studio Environments , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Abdulkarim AMINU, Mohammed ALIYU, Ibrahim S. MOHAMMED, Iyanda M. ANIMASHAUN, Peter DANIEL, Mohammad USMAN, Production and Optimisation of Parameters for Density and Ash Content of Briquettes Produced from Sorghum Stalks and Groundnut Shells Using African Locust Bean (Parkia biglobosa) Pulp as a Binding Agent , FUDMA Journal of Engineering and Technology: Vol. 1 No. 1 (2025): July 2025
- Sheidu S. ONIMISI, Usman B. ABDULLAHI, Hayatudden S. BARAYAIS, Abubakar M. MUHAMMAD, Abubakar G. ISAH, Abubakar S. MOHAMMED, Mohammed U. GARBA, Safety Evaluation of Orifice Plate in Natural Gas Pipeline using Computer Aided Engineering (CAE): A Step Towards Food Security , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Rhoda I. ADELAJA, Ruth R. ADELAJA, Henry OTOBRISE, Adefope OWOJORI, Babatunde ADEBO, Assessment of Outdoor Radiation Exposure in an Academic Environment: A Case Study of Lead City University , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Mohammed A. GANA, Zaka A. MSHELIA, Isuwa S. AJI, Alhaji GUJJA, Lawan A.M. KOLO, Investigation and Comparative Analysis of Natural Moulding Sands from Five Deposits in Maiduguri, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Kamoru O. OLADOSU, Kabiru MUSTAPHA, Ayodeji S. OLAWORE, Akeem B. IBRAHIM, Abdulganiyu ISSA, Development of a Free-Fall Pyrolysis Reactor for Biofuel Production Using Sugarcane Bagasse and Cassava Rhizomes as Feedstocks , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Usman A. ALI, Munir A. ADEWOYE, Adamu U. ABDULLAHI, Determinants of Blockchain Adoption for Academic Certificate Verification: Insights from Verification Officers for Sustainable Education in Nigerian Higher Education Institutions , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Olarewaju T. OGINNI, An Overview of Unmanned Aerial Vehicles Technologies for Office Use and Services Delivery , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
You may also start an advanced similarity search for this article.
Most read articles by the same author(s)
- Abubakar LAWAL, Abdulkadir O. ABDULBAKI, Nathaniel SALAWU, Bala A. SALIHU, Mamman A. THOMAS, Abraham U. USMAN, Sub-6 GHz Millimeter-Wave Metamaterial Antenna with Reconfigurable Radiation Patterns for Enhanced Wireless Communication , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Suleiman ZUBAIR, Hassan T. ABDULAZEEZ, Bala A. SALIHU, Gambo MOHAMMED, A Low-Cost, Offline-Capable Wireless Soil Moisture Monitoring System for Smallholder Farmers: Design, Validation, and Agronomic Impact , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
