Performance Evaluation of Climate Products with Validation Using Bootstrapping and Climate Extremes in the Hadejia-Jama’are River Basin, Nigeria
- Authors
-
-
Idris M. WADA
Department of Agricultural Engineering, Faculty of Engineering, Federal University, Wukari, Nigeria
Author
-
Abba IBRAHIM
Department of Agricultural and Environmental Engineering, Faculty of Engineering, Bayero University, Kano, Nigeria
Author
-
Genesis ISHAYA
Department of Agricultural Engineering, Faculty of Engineering, Federal University, Wukari, Nigeria
Author
-
- Keywords:
- Climate Products, Compromise Programming, Multi-Criteria Group Decision Making, Hadejia-Jama’are River basin, Statistical evaluation, Climate extremes.
- Abstract
-
The increasing availability of satellite, reanalysis, and gauge-based Climate Products (CPs) has significantly advanced hydroclimatic research, particularly in data-scarce regions. Despite their usefulness, these CPs often carry substantial uncertainties, necessitating thorough evaluation before use in regional or basin-level studies. This study assesses the performance of nine precipitation and four temperature gridded datasets over the Hadejia-Jama’are River Basin (HJRB), Nigeria, using observational data from Kano, Jigawa, and Bauchi for the period 1990–2015. Daily and monthly precipitation (Pr), maximum temperature (Tmax), and minimum temperature (Tmin) temperature records were evaluated using Kling-Gupta Efficiency (KGE), Normalized Root Mean Square Error (NRMSE), Pearson correlation (r), Percentage Bias (PBIAS), and Mean Difference (MD). The fifth generation of the European Centre for Medium-Range Weather Forecasts (ERA5) dataset demonstrated superior performance in mean annual assessment for both Tmin and Tmax with minor underestimation. Tmax biases ranged from 2.2% to 3.5% and Tmin from 0.3% to 2.1%. Climate Forecast System Reanalysis (CFSR) had the weakest performance among the temperature products. The Climate Hazards Group InfraRed Precipitation with Station data (CHIRPS) outperformed other precipitation products, with modest underestimations of 3.5% (Kano), 9% (Bauchi), and 12% (Jigawa), while Climate Prediction Center (CPC) showed the poorest alignment with observed data. Monthly statistical evaluations yielded stronger statistical performance than daily analyses, especially for temperature datasets. For precipitation, correlation coefficients exceeded 0.5 across all models at daily resolution, with CHIRPS showing the highest values. Overall model ranking using Compromise Programming Index (CPI) and Multi-Criteria Group Decision-Making Method (MCGDM) confirmed ERA5 (for Tmax and Tmin) and CHIRPS (for precipitation) as the most reliable products. Further validation using climate extremes and bootstrapped uncertainty analysis showed that the ratio of modeled to observed extremes consistently exceeded 0.5, indicating suitability for hydrological applications. The bootstrapped 95% uncertainty bands were narrow, reflecting low uncertainty in the selected CPs. ERA5 and CHIRPS emerged as the most robust datasets for hydroclimatic studies in the Hadejia-Jama’are River Basin.
- References
- Downloads
- Published
- 08-08-2025
- Section
- Articles
- License
-
Copyright (c) 2025 FUDMA Journal of Engineering and Technology

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Sati C. NSHOL, Saeed Y. UMAR, Suleiman A. YERO, Modification of the Engineering Properties of Road Base Course Soil Materials with Cement and Polyethylene Terephthalate (PET) , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Aminu BALA, Nasiru B. KADANDANI, Isiyaku ABUBAKAR, Performance Evaluation of Fuzzy Logic and Fractional Order PI Controllers for Electric Vehicle Wireless Charging System , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Joseph O. AJAYI, Adekunle T. ADENIYI, Mufliah G. OMOFOYEWA, Abel A. ADEYI, Abdulwahab GIWA, Evaluation on the Rheological Properties of Water-Based Drilling Mud: A Case Study of Ire-Ekiti Clay , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Ibrahim A. KUTI, Sunday E. OGUNMOLA, Peter A. ADEOYE, Evaluation of the Agricultural Best Management Practices (ABMPs) and Their Effect on Discharge Reduction of Shiroro Dam Site using SWAT Model , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Iliya D. IBRAHIM, Suleiman A. BABALE, Sani H. LAWAN, Auwal A. ABUBAKAR, Design of a Modified Wideband Microstrip Patch Antenna for WLAN/WiMAX Applications , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Paul A. OMALE, Hammed O. SALAUDEEN, Sunday S. IGILA, Enoch T. CHIN, Determination of the Physicochemical Composition of Processed Powdered Pepper (Capsicum spp.) Sold in Selected Markets in Makurdi, Benue State, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Nuhu MOHAMMED, Garkuwa Y. ADAMU, Abubakar A. FACHWAY, Aminu MOHAMMED, Afolayan A. OLASUNKANMI, Odoh F. CHIMEZIE, Muhammad A. YUSUF, Development of A Water-Recycling Pico Hydropower System , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Chukwuemeka S. IBEH, Abubakre O. KAMARDEEN, Saka A. ABDULKAREEM, Aliyu A. ABDULLAHI, Experimental Study on the Characterisation and Thermo-Physical Properties of Graphene-Agro Based Hybrid Nanofluids , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Mohammed K. BASHIR, Sanusi A. DARMA, Usman MAHMUD, Mansir ABUBAKAR, Enhanced Breast Cancer Classification Using Ensemble Learning and Data Resampling Techniques: A Machine Learning Approach , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Afeez A. AWOLOKUN, Olusegun O. ALUKO, Temitope F. AWOLUSI, Mayowa A. OGIDI, Performance Evaluation of Pervious Concrete Containing Glass Cullet and Glass Powder for Sustainable Construction , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
You may also start an advanced similarity search for this article.
