Performance Evaluation of Climate Products with Validation Using Bootstrapping and Climate Extremes in the Hadejia-Jama’are River Basin, Nigeria
- Authors
-
-
Idris M. WADA
Department of Agricultural Engineering, Faculty of Engineering, Federal University, Wukari, Nigeria
Author
-
Abba IBRAHIM
Department of Agricultural and Environmental Engineering, Faculty of Engineering, Bayero University, Kano, Nigeria
Author
-
Genesis ISHAYA
Department of Agricultural Engineering, Faculty of Engineering, Federal University, Wukari, Nigeria
Author
-
- Keywords:
- Climate Products, Compromise Programming, Multi-Criteria Group Decision Making, Hadejia-Jama’are River basin, Statistical evaluation, Climate extremes.
- Abstract
-
The increasing availability of satellite, reanalysis, and gauge-based Climate Products (CPs) has significantly advanced hydroclimatic research, particularly in data-scarce regions. Despite their usefulness, these CPs often carry substantial uncertainties, necessitating thorough evaluation before use in regional or basin-level studies. This study assesses the performance of nine precipitation and four temperature gridded datasets over the Hadejia-Jama’are River Basin (HJRB), Nigeria, using observational data from Kano, Jigawa, and Bauchi for the period 1990–2015. Daily and monthly precipitation (Pr), maximum temperature (Tmax), and minimum temperature (Tmin) temperature records were evaluated using Kling-Gupta Efficiency (KGE), Normalized Root Mean Square Error (NRMSE), Pearson correlation (r), Percentage Bias (PBIAS), and Mean Difference (MD). The fifth generation of the European Centre for Medium-Range Weather Forecasts (ERA5) dataset demonstrated superior performance in mean annual assessment for both Tmin and Tmax with minor underestimation. Tmax biases ranged from 2.2% to 3.5% and Tmin from 0.3% to 2.1%. Climate Forecast System Reanalysis (CFSR) had the weakest performance among the temperature products. The Climate Hazards Group InfraRed Precipitation with Station data (CHIRPS) outperformed other precipitation products, with modest underestimations of 3.5% (Kano), 9% (Bauchi), and 12% (Jigawa), while Climate Prediction Center (CPC) showed the poorest alignment with observed data. Monthly statistical evaluations yielded stronger statistical performance than daily analyses, especially for temperature datasets. For precipitation, correlation coefficients exceeded 0.5 across all models at daily resolution, with CHIRPS showing the highest values. Overall model ranking using Compromise Programming Index (CPI) and Multi-Criteria Group Decision-Making Method (MCGDM) confirmed ERA5 (for Tmax and Tmin) and CHIRPS (for precipitation) as the most reliable products. Further validation using climate extremes and bootstrapped uncertainty analysis showed that the ratio of modeled to observed extremes consistently exceeded 0.5, indicating suitability for hydrological applications. The bootstrapped 95% uncertainty bands were narrow, reflecting low uncertainty in the selected CPs. ERA5 and CHIRPS emerged as the most robust datasets for hydroclimatic studies in the Hadejia-Jama’are River Basin.
- References
- Downloads
- Published
- 08-08-2025
- Section
- Articles
- License
-
Copyright (c) 2025 FUDMA Journal of Engineering and Technology

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Johnson O. ADEOGO, Olawale J. OLALUYI, Olumuyiwa A. OJO, Abayomi T. AYODELE, Elijah A. OLAJUYIN, Fasasi BELLO, Paul C. OFODU, Performance Evaluation of 3.5 kVA Hybrid Inverter Following Standard Engineering Practices and Safety Procedures , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Caleb A. ABORISADE, Jide E.T. AKINSOLA, Ifeoluwa M. OLANIYI, Fathia O. ONIPEDE, Emmanuel A. OLAJUBU, Ganiyu A. ADEROUNMU, Machine Learning-Based Polycystic Ovary Syndrome Generative Modelling via Ensemble Learning and Neural Networks for Infertility Prediction , FUDMA Journal of Engineering and Technology: Vol. 1 No. 1 (2025): July 2025
- Hammed A. OLASUNKANMI, Olumuyiwa I. ADENIJI, Mufutau K. LAWAL, Babatola E. OJO, Babayemi D. OMOWOLE, Somtochukwu E. AVAH, Isiaka A. ADELEKE, Kudirat N. POPOOLA, Ademidun E. IBITOYE, Design and Implementation of a Secure AI-Based Product Showcase and Customer Support System for Small and Medium-Sized Enterprises , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Ojochide P. DAMIAN, Fadimatu N. DABAI, Abdulwasiu ABDURRAHMAN, Kamiludeen OLANREWAJU, Bilyamin ABDULMUMIN, Grace A. OLUGBENGA, A Simulation-Driven Strategy for Improved Expandable Polystyrene Synthesis via Multi-Stage Initiator Dosing , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Muhammad M. ABDULLAHI, Iyanda M. ANIMASHAUN, Ibrahim A. ABDULFATAI, George U. STEPHEN, Spatial Scale Effects on the Relationship Between Land Use/Land Cover Change and Potential Evapotranspiration in Niger State, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Abimbola J. KOLAWOLE, AbdulKodri G. ABDULRAFIU, An Evaluation of the Challenges and Limitations in the Adoption of Technological Innovations at Nnamdi Azikiwe International Airport , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Muhammad M. HAMIDU, Mathew KATAMBI, Omar FARUQ, Techno-Economic and Environmental Assessment of a Solar PV-Based Microgrid for Residential Electrification in Gwange I, Maiduguri Using HOMER Pro , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Sheidu S. ONIMISI, Usman B. ABDULLAHI, Hayatudden S. BARAYAIS, Abubakar M. MUHAMMAD, Abubakar G. ISAH, Abubakar S. MOHAMMED, Mohammed U. GARBA, Safety Evaluation of Orifice Plate in Natural Gas Pipeline using Computer Aided Engineering (CAE): A Step Towards Food Security , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Oluyemi S. ONIFADE, Olusegun O. AJIDE, Development and Performance Evaluation of a Semi-Automated Impact Fracture Tester , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Musibaudeen O. IDRIS, Busayo S. ADEBOYE, Rasheedah A. AYOOLA, Abiodun G. ABIOYE, Abideen T. OYEWO, An Artificial Neural Network-Based Quality Control Framework for Nigerian Manufacturing Industries , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
You may also start an advanced similarity search for this article.
