Design and Construction of Dual Input Mobile Solar Generator for Reliable Off-Grid Power
- Authors
-
-
Zaharaddeen MUSA
Department of Electrical and Electronics Engineering, Federal University Dutsin-Ma, Katsina State, Nigeria
Author
-
Aliyu BELLO
Department of Electrical and Electronics Engineering, Federal University Dutsin-Ma, Katsina State, Nigeria
Author
-
Haris A. DANLADI
Department of Electrical and Electronics Engineering, Aliko Dangote University of Science and Technology Wudil, Kano State, Nigeria
Author
-
- Keywords:
- Solar Generator, Dual Input Hybrid Power System, AC/DC Microgrid, Renewable Energy, Off-Grid Electrification.
- Abstract
-
Irregular electricity supply remains a persistent challenge in many developing communities, including Dutsin-Ma in Katsina State, Nigeria. Frequent outages, poor voltage quality, and heavy reliance on expensive fuel-powered generators hinder household comfort, business operations, and overall socio-economic development. Although renewable energy offers a viable alternative, conventional solar generators exhibit performance limitations during periods of low solar irradiance, resulting in unreliable backup power. This study presents the design and performance evaluation of a Dual Input Mobile Solar Generator with hybrid charging capability, supporting both DC solar charging and AC grid charging. The dual-input configuration enhances system flexibility, minimizes charging downtime, and significantly improves energy accessibility compared to solar-exclusive systems. The generator is fully portable, enabling easy deployment across households, business premises, construction sites, outdoor events, and emergency response locations. Field relevance in Dutsin-Ma demonstrates its practicality, where solar charging supports daytime energy demands while intermittent grid availability enables supplementary AC charging to maintain battery continuity. The proposed hybrid system reduces dependence on petrol generators, improves power reliability, and provides clean, cost-effective energy for households, schools, and small enterprises. Overall, the findings highlight the potential of hybrid solar technologies to strengthen energy resilience in weak-grid regions and contribute to sustainable development.
- References
- Downloads
- Published
- 27-12-2025
- Section
- Articles
- License
-
Copyright (c) 2025 FUDMA Journal of Engineering and Technology

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Oluwasanmi S. ADANIGBO, Opeyemi O. ASAOLU, Adedayo A. SOBOWALE, Temidayo AKINDAHUNSI, Akinbayode A. ASAOLU, Intrusion Detection in Mobile Adhoc Networks: A Review of Signature-Based, Anomaly-Based, and Hybrid Approaches , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Nnamdi S. OKOMBA, Adedayo A. SOBOWALE, Adebimpe O. ESAN, Bolaji A. OMODUNBI, Taiwo A. AWOYEMI, Development of an Intelligent-Based Elevator System , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Abubakar S. MOHAMMED, Mohammed ALIYU, Mohammed U. GARBA, Ibrahim S. MOHAMMED, Ibrahim A. KUTI, Meshack S. IMOLOGIE, Umaru MUSA, Olalekan D. ADENIYI, Peter A. ADEOYE, Abubakar G. ISAH, Folarin T. OLORUNMOTITO, Development and Packaging of Eco-friendly Biosolid Briquettes Synthesised with Bagasse for Green Energy Generation and Utilisation , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Mukhtar N. YAHYA, Sohaib ALHAJHUSSEIN, Wastewater Analysis Using Kubota Membrane Bioreactor System , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Oyeyemi T. AFOROLAGBA-BALOGUN, Olumide A. TOWOJU, Characterization of Fuel Produced from Nylon (Polyamide) and Polyethylene Terephthalate (PET) Wastes with Pyrolysis , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Damilare L. ADEKEYE, Isiyaku SALEH, Yemisi E. AKINSELI, Design and Implementation of an Automatic Gate for Cars at Railway Crossings , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Christopher C. NWAOGU, Nnamdi AHUCHAOGU, Reducing Electromagnetic Radiation Around the Fourth Generation Base Stations , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Jennifer BALA, Sikiru O. SUBAIRU, Noel M. DOGONYARO, Joseph A. OJENIYI, Suleiman AHMAD, Development of an Optimized Hybrid XGBoost–GRU Model for Detection of Ponzi Schemes in Ethereum Transaction Networks , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Umar A. IBRAHIM, Abdulra’uf G. SHARIFAI, Hybrid CNN Feature Fusion with Optimization for Precision Potato Leaf Disease Classification , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Ojochide P. DAMIAN, Fadimatu N. DABAI, Abdulwasiu ABDURRAHMAN, Kamiludeen OLANREWAJU, Bilyamin ABDULMUMIN, Grace A. OLUGBENGA, A Simulation-Driven Strategy for Improved Expandable Polystyrene Synthesis via Multi-Stage Initiator Dosing , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
You may also start an advanced similarity search for this article.
