Performance Evaluation of Fuzzy Logic and Fractional Order PI Controllers for Electric Vehicle Wireless Charging System
- Authors
-
-
Aminu BALA
Department of Electrical and Electronics Engineering, Federal University Dutsin-Ma, Katsina State, Nigeria
Author
-
Nasiru B. KADANDANI
Department of Electrical Engineering, Bayero University, Kano, Nigeria
Author
-
Isiyaku ABUBAKAR
Department of Electrical Engineering, Bayero University, Kano, Nigeria
Author
-
- Keywords:
- Electric vehicles, wireless power, fuzzy controller, fractional order PI controller, DC-DC converter.
- Abstract
-
This study presents a comprehensive performance evaluation of fuzzy logic controller (FLC) and fractional order proportional integral (FOPI) controller applied to an electric vehicle (EV) wireless charging system. A comparative analysis was conducted through detailed simulation models in MATLAB software R2021a to assess the controllers’ effectiveness in maintaining regulated and stable output voltage and power transfer efficiency. Although both FLC and FOPI controllers have been explored in various nonlinear systems, limited comparative performance studies exist on their application to EV wireless charging systems under identical simulation conditions. Moreover, most previous works focus on conventional PID control and do not compare intelligent controllers (like Fuzzy and FOPI). The FLC was implemented in MATLAB software using FLC tool box to address system nonlinearities through rule-based system, while Fractional-Order Modeling and Control (FOMCON) tool box in MATLAB Simulink was utilized to obtain optimal parameters for FOPI controller. The optimized parameters obtained when integral time square error (ITSE) was used as performance matrix are proportional gain, kp = 3.2555, integral gain, ki = 2.5062 and =0.93 which improve control precision. Simulation outcomes revealed that FLC controller demonstrated superior dynamic performance in terms of power transfer efficiency of 89% compared to FOPI and open loop of 72&and 21.8% respectively. It was established that FOPI controller enhanced system stability with minimal overshoot and settling time compared to FLC. These results indicate that advanced control methodologies, such as FLC and FOPI controllers can substantially improve the operational reliability and efficiency of EV wireless charging systems by promoting wider adoption of wireless charging technologies.
- References
- Downloads
- Published
- 22-12-2025
- Section
- Articles
- License
-
Copyright (c) 2025 FUDMA Journal of Engineering and Technology

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Adesoye S. ADEGOKE, Lateef A. OTEGBEYE, Olufemi S. SONEYE, Oluwole O. GREEN, Patrick O. OLABISI, Assessment of Radio-Frequency Radiation Levels from Cellular Base Transceiver Stations in Residential Areas and Their Potential Health Effects on Humans , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Auwalu M. ABDULLAHI, Musa M. BELLO, Ado HARUNA, Amina I. KHALEEL, Lubabatu B. ILA, Abdurrahaman M. BELLO, Adaptive Hybrid Compliant Control of a Desktop Upper-Limb Rehabilitation Robot , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Koliya LAAYE, Solomon O. OGUCHE, Ibrahim I. JIDDA, Abdullahi A. ADAMU, Economic Viability of Waste-to-Energy: Pathways for Sustainable Power Generation in Jalingo, Taraba State, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Bala I. ABDULKARIM, Yusuf M. BABA, Suleiman I. ENEHE, Kamoru A. SALAM, Umar IDRISS, Synthesis of Activated Carbon from Corncob for the removal of Lead (Pb²⁺) ions from Aqueous solution using a packed bed Adsorption Column , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Ibrahim BALA, Solomon M. DAUDA, Audu A. BALAMI, Peter A. IDAH, Design Analysis of a Kenaf Decorticating Machine , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Fatima A. MUSA, Abdulmajid B. UMAR, Abba M. BALA, A Hybrid CNN–BiGRU Model with Grey Wolf Optimization and LightGBM for Stock Price Prediction , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Gregory T. AKAU, Abel AIROBOMAN, Nathaniel DALLA, Design and Implementation of IOT-Based Intravenous (IV) Bag Monitoring and Alert System , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Muhammad B. MUHAMMAD, Noor S. B. MANSOR, Fariha R. KHAN, Investigating Breakdown Strength Based on Trapping Profile in Cross-Linked Polyethylene (XLPE) Nanocomposites , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Benedict O. EDENSETING, Innocent O. OBOH, Alexander A. JOCK, Effective Food Waste Utilization: A Veritable Source of Biofuel for Nigerian Economic Sustenance and Development - A Review , FUDMA Journal of Engineering and Technology: Vol. 1 No. 1 (2025): July 2025
- Oluwaseun S. OGUNGBEMI, Geophysical Approach to Groundwater Resource Appraisal in Afe Babalola University, Ado-Ekiti, Southwestern Nigeria , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
You may also start an advanced similarity search for this article.
Most read articles by the same author(s)
- Muhammad B. MUHAMMAD, Muhammad Y. ABDULLAHI, Aminu BALA, Optimal Reduction of Technical Power Losses in Radial Distribution Networks Using Differential Evolution for Distributed Generation: A Case Study of the Azare Substation in Nigeria , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
