Effective Food Waste Utilization: A Veritable Source of Biofuel for Nigerian Economic Sustenance and Development - A Review
- Authors
-
-
Benedict O. EDENSETING
Department of Petroleum and Gas Engineering, Nigeria Maritime University, Okorenkoko, Nigeri
Author
-
Innocent O. OBOH
Department of Chemical Engineering, University of Uyo, Uyo, Nigeria
Author
-
Alexander A. JOCK
Department of Chemical Engineering, Federal University, Wukari, Nigeria
Author
-
- Keywords:
- Waste, environment, energy, biofuel, economics.
- Abstract
-
Waste generation is on the increase as the population of Nigeria increases. The current waste management practice is becoming unsustainable in the country. Nigeria generates over 25 million tonnes as municipal solid waste with one third of it generated being kitchen waste. Demand for biofuels is rapidly growing worldwide as petroleum-based fuels are finite and environmentally unfriendly. Kitchen waste is capable of producing biogas, bioethanol and biodiesel which will afford the country affordable cleaner energy for national development. It is therefore imperative to optimize this source of renewable energy for advancement of transportation, industrial growth, power generation and overall national economic growth. Hence, this review highlights the enormous energy potential in kitchen cum domestic waste.
- References
- Downloads
- Published
- 03-07-2025
- Section
- Articles
- License
-
Copyright (c) 2025 FUDMA Journal of Engineering and Technology

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Hillary T. OGBODO, Bilkisu L. MUHAMMAD-BELLO, Joshua ABAH, Saleh E.-Y. ABDULLAHI, Quantum Computing Applications in Software Engineering: A Scoping Review , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Ibrahim BALA, Solomon M. DAUDA, Audu A. BALAMI, Peter A. IDAH, Design Analysis of a Kenaf Decorticating Machine , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Mu’azu ABUBAKAR, Abubakar B. ALIYU, Dauda GARBA, Fabrication, Characterization, and Application of Clay-Based Ceramic Membranes for Oily Wastewater Treatment: A Review , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Christopher C. NWAOGU, Nnamdi AHUCHAOGU, Reducing Electromagnetic Radiation Around the Fourth Generation Base Stations , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Oluwaseun S. OGUNGBEMI, Geophysical Approach to Groundwater Resource Appraisal in Afe Babalola University, Ado-Ekiti, Southwestern Nigeria , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Beabu B. DUMKHANA, Dandison M. WALI, Assessment of the Impact of Tractor Noise Exposure on Operators and Bystanders , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Shehu ABDULKADIR, Dangora N. DAUDA, Aliyu A. ADAMU, Badaru M. SANI, Rilwan ABUBAKAR, Timothy A. TIMOTHY, Uchechukwu M. AGBOM, Abubakar S. ABUBAKAR, Development and Performance Evaluation of a Modified Active Evaporative Cooling System for Postharvest Preservation of Selected Vegetables , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Cletus C. OPUTE, Obumneme O. OKWONNA, Comparative Analysis on the Efficiencies of Unmodified Clay and Microorganism-Modified Clay as Adsorbent for the Adsorption of Lead (II) Ions from Wastewater , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Ephraim G. KEFAS, Abdulfatai JIMOH, Mohammed A. EVUTI, Abubakar A. IBRAHIM, Abdulwahab GIWA, Adeola G. OLUGBENGA, Luffa Sponge, Banana Stem and Delonix regia Seed Characterization as Potential Biosorbents for Industrial Wastewater Remediation , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Usman A. ABDURRAHMAN, Abubakar A. ROGO, Abdulkadir A. BICHI, Akibu M. ABDULLAHI, Beyond Overload: Assessing Cognitive Load to Facilitate Learning Transfer in Virtual Environments , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
You may also start an advanced similarity search for this article.
