An Assessment of Power Sources for Improved Energy Supply in University of Maiduguri
- Authors
-
-
Muhammad M. HAMIDU
Department of Mechanical Engineering, University of Maiduguri, Maiduguri, Nigeria
Author
-
Abubakar M. EL-JUMMAH
Department of Mechanical Engineering, University of Maiduguri, Maiduguri, Nigeria
Author
-
Muhammad SHUWA
Department of Mechanical Engineering, University of Maiduguri, Maiduguri, Nigeria
Author
-
- Keywords:
- Assessment, power sources, electricity supply, University of Maiduguri.
- Abstract
-
University of Maiduguri makes use of Electricity supply from the National grid and diesel powered generators along site solar supply. This assessment was prompted by disruptions in electricity supply, exacerbated by rising diesel prices and commercialized electricity tariffs. The study aims to evaluate the impact of electricity costs and reasons behind the choice of alternative power sources for the University, focusing on the comparative costs over a projected ten-year period. In order to effectively carry out the assessment, this work compares the design of the combined analysis of solar and diesel power plants to the national grid commercial supply. A methodological approach was adopted, combining quantitative data analysis with interviews to gather insights. Data was analyzed using Excel for forecast projections. The findings indicate that over ten years, the total projected costs for electricity supply are ₦90.82 billion for the national grid, ₦34.02 billion for diesel generators, and ₦21.38 billion for solar energy. While electricity from the national grid incur the highest costs, the solar system offers the most economical solution. Interviews revealed that the high costs of energy are influenced not only by direct pricing from the national grid and diesel but also by consumer behavior. Increasing awareness and educating users about energy conservation could significantly alleviate energy expenses within the university. Given these findings, it is recommended to pursue a complete installation of solar power systems at the University of Maiduguri. Furthermore, investigating hybrid power solutions, such as combining solar with wind energy, is suggested for enhanced efficiency and effectiveness in electricity supply.
- References
- Downloads
- Published
- 06-10-2025
- Section
- Articles
- License
-
Copyright (c) 2025 FUDMA Journal of Engineering and Technology

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Olusola K. AKINDE, Abolaji O. ILORI, Habeeb A. ARIKEWUYO, Development of a Wearable Fall Sensing Device for Enhanced Independent Living Among the Elderly , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Ahmad ADO, Abdullahi YAHAYA, Abubakar J. MUHAMMAD, Zaharaddeen G. SANI, Baba A. OLUWA, Abdulazeez A. YUSUF, Kinetic Study of 4-Nitrophenol Sonocatalytic Degradation , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Nuhu MOHAMMED, Garkuwa Y. ADAMU, Abubakar A. FACHWAY, Aminu MOHAMMED, Afolayan A. OLASUNKANMI, Odoh F. CHIMEZIE, Muhammad A. YUSUF, Development of A Water-Recycling Pico Hydropower System , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Kazeem A. BELLO, Adeniyi O. ADESINA, Lukman A. OPEYEMI, Solomon O. UVIASE, Francis O. BOROKINNI, Friday ONUH, Tunde O. OGUNDANA, Adebayo I. OLUMOROTI, Developments and Applications of Additive Manufacturing in the Automotive Industry , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Martins Y. OTACHE, Iyanda M. ANIMASHAUN, Sadeeq A. MOHAMMED, Emmanuel O. AGBESE, Spatiotemporal Variability and Trend Analysis of Rainfall and Temperature in Northern Nigeria , FUDMA Journal of Engineering and Technology: Vol. 1 No. 1 (2025): July 2025
- Lukman MOHAMMED, Victor O. WAZIRI, Ismaila IDRIS, Suleiman AHMAD, Performance Assessment of Android Antimalware Applications: An Experimental Approach , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Kazeem A. BELLO, Adeniyi O. ADESINA, Lukman A. OPEYEMI, Solomon O. UVIASE, The Impact of Industry 4.0 on New Product Development in Small and Medium Enterprises: A Review , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Yusuf L. SHUAIB-BABATA, Kabiru S. AJAO, Yusuf O. BUSARI, Ibrahim O. AMBALI, Kehinde O. ARUNA, Henrietta O. COKER, Toheeb A. NURUDEEN, Evaluation of UNILORIN Dam Moulding Sand Properties for Foundry Applications , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Kingsley C. IGWE, Abubakar T. MUHAMMAD, Obiseye OBIYEMI, Abiodun S. MOSES, Aku G. IBRAHIM, Joel A. EZENWORA, Julia O. EICHIE, Real-Time Evaluation of Rain-Induced Signal Degradation on Digital Satellite Television Links in Minna, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Peter EDOKA, Assessment of the Role of Kogi State Government in Flood Mitigation in Lokoja, Kogi State, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
You may also start an advanced similarity search for this article.
Most read articles by the same author(s)
- Hafsah A. ABDULRAHMAN, Muhammad M. HAMIDU, Techno-Economic Optimization of a Hybrid PV-Wind-Waste-to Energy System for the University of Maiduguri , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Muhammad M. HAMIDU, Development of MATLAB-Based Model for Solar Radiation Prediction and Photovoltaic Panel Tilt Optimization Angle for Maiduguri Region, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Muhammad M. HAMIDU, Mathew KATAMBI, Omar FARUQ, Techno-Economic and Environmental Assessment of a Solar PV-Based Microgrid for Residential Electrification in Gwange I, Maiduguri Using HOMER Pro , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Babagoni A. ADAM, Muhammad B. MAINA, Muhammad SHUWA, Abba B. MUHAMMAD, A Review on Neem Leaves Valorization Through Advanced Briquetting and Carbonization Technologies , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
