Waste Management in Bauchi Metropolis: Solid Measure and Characterization in Municipality
- Authors
-
-
Samaila J. EL-PATEH
Bauchi State Ministry of Water Resources, Bauchi, Bauchi State, Nigeria
Author
-
Ibrahim IDRIS
Kano State Ministry of Water Resources, Kano, Kano State, Nigeria
Author
-
- Keywords:
- Solid waste, waste characterization, waste components, household waste.
- Abstract
-
The research examined waste management in order to prevent diseases in the Bauchi city, Bauchi local government in Bauchi state of Nigeria by technical and scientific approach to utilized generated solid of waste; that is physical composition of refuse dumped out of small, medium enterprises and communities. The study exhausted more than twelve-week when conducting questionnaire, interviews and survey that employed in the collection of the required data. According to National Population Commission (2006) population of Bauchi metropolis and its environs has growth rate of 3.2% annually which identified different percentage embedded to solid waste disposals; composition of dirt, ash and other unidentified objects was 20.2%, paper/cardboard 14.1%, nylon and polythene 16.4%, garden leaves 13.5%, food waste 11.6% while tin cans/metals were 5.1%, textile/fabrics 6.2%, plastic/rubber 6.8% and lastly glass and ceramics waste 6.1%. Over 80% of the waste fraction has the potential for recovery into other products; with this, 42.4% could be recycled and 51.56% suitable for biological conversions such as composting and anaerobic digestion, expected solid waste accumulated in Bauchi capital city daily was 0.30 kg/cap/day, the solid waste management studies may guide stakeholders to pick positive decisions on waste management options.
- References
- Downloads
- Published
- 24-09-2025
- Section
- Articles
- License
-
Copyright (c) 2025 FUDMA Journal of Engineering and Technology

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Mohammed U. GARBA, Usman B. ABDULLAHI, Hayatudden S. BARAYAIS, Aisha B. FARUQ, Suleiman IDRIS, Abubakar M. MUHAMMAD, Abubakar S. MOHAMMED, Treatment of Gold Mining Wastewater: A Review of Current Technologies and Future Perspectives , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Bala ABDULLAHI, Bala G. ABDURRAHMAN, Yusuf ALHASAN, Saidu B. ABUBAKAR, Bashir I. KUNYA, Raya K. ALDADAH, Saad MAHMOUD, Ahmed REZK, Effects of Truncating the Height of Compound Parabolic Collector on its Geometry, Optical and Thermal Performances , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Ibrahim BALA, Solomon M. DAUDA, Audu A. BALAMI, Peter A. IDAH, Design Analysis of a Kenaf Decorticating Machine , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Stephen YAKUBU, Baba MAKUN, Effect of Petroleum Contamination on Soil Properties and the Removal Efficiency of Volatile Organic Compounds Using Air-Stripping System , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Abubakar D. ADO, Aminu D. MAHMUD, Jamilu HARUNA, Sadiq S. DODO, Abdullahi YAHAYA, Development of Enhanced Coal Briquettes for Domestic Cooking Applications in Nigeria , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- James AUDU, Abdulraman A. SALAWU, Muriana R. AREMU, Abdullahi A. ALHAJI, Lawal S. SIUS, Characterisation of Pumice-Kaolin Refractory Bricks for High Temperature Industrial Applications , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Bala I. ABDULKARIM, Yusuf M. BABA, Suleiman I. ENEHE, Kamoru A. SALAM, Umar IDRISS, Synthesis of Activated Carbon from Corncob for the removal of Lead (Pb²⁺) ions from Aqueous solution using a packed bed Adsorption Column , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Aminu D. MAHMUD, Imran N. IBRAHIM, Development and Optimization of Starch-Based Bioplastics from Millet and Cassava Using Mixture Design Approach , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Oguntola J. ALAMU, Peter O. ILORI, Seun OYELAMI, Wasiu O. ADEDEJI, Tunji J. ADEPOJU, Abideen T. OYEWO, A Review of the Effect of Post-Processing Heat Treatment on 3D Printed Metal Parts , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Zaharaddeen MUSA, Aliyu BELLO, Haris A. DANLADI, Design and Construction of Dual Input Mobile Solar Generator for Reliable Off-Grid Power , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
You may also start an advanced similarity search for this article.
