Preparation and Characterization of Enhanced Hierarchical Zn-Ni/HZSM-5 Catalysts for Potential use in Catalytic reactions to Upgrade Bio-Oil and Hydrogen from Biomass Pyrolysis
- Authors
-
-
Sulaiman Y. ADAMU
Department of Chemical Engineering, Ahmadu Bello University, Zaria, Nigeria
Author
-
Fadimatu N. DABAI
Department of Chemical Engineering, University of Abuja, Abuja, Nigeria
Author
-
Abdulazeez Y. ATTA
Department of Chemical Engineering, Ahmadu Bello University, Zaria, Nigeria
Author
-
Baba Y. JIBRIL
Department of Chemical Engineering, Ahmadu Bello University, Zaria, Nigeria
Author
-
- Keywords:
- Hierarchical ZSM-5, biomass pyrolysis, bio-oil upgrading, metal-doped catalysts, desilication.
- Abstract
-
This study investigates the synthesis and characterization of hierarchical ZSM-5 and metal-doped hierarchical Zn-Ni/ZSM-5 catalysts to potentially improve the bio-oil and hydrogen production from biomass (rice husk) pyrolysis. Traditional zeolites, due to their microporous structure, often pose limitations in reactant accessibility, adversely affecting catalytic performance. To address these challenges, hierarchical zeolites incorporating mesoporosity were developed. The hierarchical ZSM-5 was synthesized via an alkaline desilication process, enhancing its mesoporous characteristics, with surface area increasing from 111 m²/g to 141 m²/g and average pore size expanding from 2 nm to 5 nm. Characterization techniques, including X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR), confirmed the retention of the MFI-type zeolite framework post-modification. The findings indicate that the hierarchical structure has the potential to enhance mass transfer and reactant accessibility, making these catalysts promising candidates for the reforming of biomass pyrolysis products, which can lead to sustainable bio-oil and hydrogen production. This research provides a foundation for future optimization of catalyst performance and exploration of diverse biomass feedstocks, contributing to advancements in cleaner energy technologies.
- References
- Downloads
- Published
- 15-09-2025
- Section
- Articles
- License
-
Copyright (c) 2025 FUDMA Journal of Engineering and Technology

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Kingsley C. IGWE, Abubakar T. MUHAMMAD, Obiseye OBIYEMI, Abiodun S. MOSES, Aku G. IBRAHIM, Joel A. EZENWORA, Julia O. EICHIE, Real-Time Evaluation of Rain-Induced Signal Degradation on Digital Satellite Television Links in Minna, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Michael R. ADU, Blessing O. UMUKORO, Design and Construction of a 1.5 kVA Pure Sine Wave Inverter for Office Use , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Bala YAHAYA, Characterization of Soil Quality Parameters in Sector 2 of Watari Irrigation Project, Kano , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Aminu D. MAHMUD, Imran N. IBRAHIM, Development and Optimization of Starch-Based Bioplastics from Millet and Cassava Using Mixture Design Approach , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Benedict O. EDENSETING, Innocent O. OBOH, Alexander A. JOCK, Effective Food Waste Utilization: A Veritable Source of Biofuel for Nigerian Economic Sustenance and Development - A Review , FUDMA Journal of Engineering and Technology: Vol. 1 No. 1 (2025): July 2025
- Suleiman ZUBAIR, Hassan ABDULAZEEZ, Bala A. SALIHU, Abubakar A. SHUAIBU, Design and Implementation of a BLE 5.0-Enabled Wearable Finger Mouse Using the XIAO nRF52840 Platform , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Sati C. NSHOL, Saeed Y. UMAR, Suleiman A. YERO, Modification of the Engineering Properties of Road Base Course Soil Materials with Cement and Polyethylene Terephthalate (PET) , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Emmanuel T. ODEYEMI, Ya’u S. HARUNA, Ganiyu A. BAKARE, Hassan B. MAMMAN, Sabo M. HASSAN, BAT-Optimized PID and ANFIS Torque-Based MPPT for a 0.5 MW PMSG-Based Wind Energy Conversion System Under Dynamic Wind Conditions , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Joshua T. AKINWAMIDE, Jacob O. EHIOROBO, Oluwayinka G. AKINWAMIDE, Geotechnical Evaluation of Lateritic Soil Index Properties in Ekiti State Districts, Southwestern Nigeria for Road Pavement Construction , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Vincent B. ONIGBARA, Muftau A. GBENLE, Sunday I. AGU, Mechanical and Biological Performance of Titanium Hydroxyapatite Composites for Biomedical Applications , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
You may also start an advanced similarity search for this article.
Most read articles by the same author(s)
- Ojochide P. DAMIAN, Fadimatu N. DABAI, Abdulwasiu ABDURRAHMAN, Kamiludeen OLANREWAJU, Bilyamin ABDULMUMIN, Grace A. OLUGBENGA, A Simulation-Driven Strategy for Improved Expandable Polystyrene Synthesis via Multi-Stage Initiator Dosing , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Fadimatu N. DABAI, Abdulkadir M. SANI, Abdulwasiu ABDURRAHMAN, Comparative Study of Thermal, Catalyst-Mediated, Biomass-Assisted, and Combined Upgrading Routes for Nigerian Bitumen over a Hierarchical CoMo/ZSM-5 Zeolite Catalyst , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
