Preparation and Characterization of Enhanced Hierarchical Zn-Ni/HZSM-5 Catalysts for Potential use in Catalytic reactions to Upgrade Bio-Oil and Hydrogen from Biomass Pyrolysis
- Authors
-
-
Sulaiman Y. ADAMU
Department of Chemical Engineering, Ahmadu Bello University, Zaria, Nigeria
Author
-
Fadimatu N. DABAI
Department of Chemical Engineering, University of Abuja, Abuja, Nigeria
Author
-
Abdulazeez Y. ATTA
Department of Chemical Engineering, Ahmadu Bello University, Zaria, Nigeria
Author
-
Baba Y. JIBRIL
Department of Chemical Engineering, Ahmadu Bello University, Zaria, Nigeria
Author
-
- Keywords:
- Hierarchical ZSM-5, biomass pyrolysis, bio-oil upgrading, metal-doped catalysts, desilication.
- Abstract
-
This study investigates the synthesis and characterization of hierarchical ZSM-5 and metal-doped hierarchical Zn-Ni/ZSM-5 catalysts to potentially improve the bio-oil and hydrogen production from biomass (rice husk) pyrolysis. Traditional zeolites, due to their microporous structure, often pose limitations in reactant accessibility, adversely affecting catalytic performance. To address these challenges, hierarchical zeolites incorporating mesoporosity were developed. The hierarchical ZSM-5 was synthesized via an alkaline desilication process, enhancing its mesoporous characteristics, with surface area increasing from 111 m²/g to 141 m²/g and average pore size expanding from 2 nm to 5 nm. Characterization techniques, including X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR), confirmed the retention of the MFI-type zeolite framework post-modification. The findings indicate that the hierarchical structure has the potential to enhance mass transfer and reactant accessibility, making these catalysts promising candidates for the reforming of biomass pyrolysis products, which can lead to sustainable bio-oil and hydrogen production. This research provides a foundation for future optimization of catalyst performance and exploration of diverse biomass feedstocks, contributing to advancements in cleaner energy technologies.
- References
- Downloads
- Published
- 15-09-2025
- Section
- Articles
- License
-
Copyright (c) 2025 FUDMA Journal of Engineering and Technology

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Ndagi MAMUDU, Ibrahim S. MOHAMMED, Peter DANIEL, Timothy Y. AKANDE, Bala A. GARBA, Development and Performance Evaluation of Biomass Pyrolysis System for Biofuel Production , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Kamoru O. OLADOSU, Kabiru MUSTAPHA, Ayodeji S. OLAWORE, Akeem B. IBRAHIM, Abdulganiyu ISSA, Development of a Free-Fall Pyrolysis Reactor for Biofuel Production Using Sugarcane Bagasse and Cassava Rhizomes as Feedstocks , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Oyeyemi T. AFOROLAGBA-BALOGUN, Olumide A. TOWOJU, Characterization of Fuel Produced from Nylon (Polyamide) and Polyethylene Terephthalate (PET) Wastes with Pyrolysis , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Onyeka E. NNANYELUGO, Peter O. OFFOR, Cyril OCHERI, Camillus S. OBAYI, Optical and Structural Properties of Er/Sr Co-Doped αMnS Films Prepared by Chemical Spray Pyrolysis , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Bala I. ABDULKARIM, Umar IDRISS, Synthesis and Characterization of Laggera aurita-Derived KOH Activated Carbon (LAKOHAC) and Role for the Adsorption of Water-Soluble Fraction of Benzene (WSFB) in Oil-Spilled Water , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Abubakar S. MOHAMMED, Mohammed ALIYU, Mohammed U. GARBA, Ibrahim S. MOHAMMED, Ibrahim A. KUTI, Meshack S. IMOLOGIE, Umaru MUSA, Olalekan D. ADENIYI, Peter A. ADEOYE, Abubakar G. ISAH, Folarin T. OLORUNMOTITO, Development and Packaging of Eco-friendly Biosolid Briquettes Synthesised with Bagasse for Green Energy Generation and Utilisation , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Muyideen O. MOMOH, Emmanuel I. AWODE, Gowon SULE, Umar ABUBAKAR, Ikechukwu O. ALUM, Usman K. AMINU, Bio-Inspired Flight Mechanisms for Unmanned Aerial Vehicles: An Overview , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Abdulkarim AMINU, Mohammed ALIYU, Ibrahim S. MOHAMMED, Iyanda M. ANIMASHAUN, Peter DANIEL, Mohammad USMAN, Production and Optimisation of Parameters for Density and Ash Content of Briquettes Produced from Sorghum Stalks and Groundnut Shells Using African Locust Bean (Parkia biglobosa) Pulp as a Binding Agent , FUDMA Journal of Engineering and Technology: Vol. 1 No. 1 (2025): July 2025
- Abdulrahman S. USMAN, Folorunsho ABERUAGBA, Moses A. OLUTOYE, Umar MUSA, Mohammed ALHASSAN, Calcium Oxide Derived from Okpella Limestone as a Heterogeneous Catalyst for Biodiesel Production: Synthesis, Characterisation and Stability Assessment , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Hyelni G. MSHELIA, Abdulfatai JIMOH, Mohammed A. EVUTI, Abubakar A. IBRAHIM, Abdulwahab GIWA, Adeola G. OLUGBENGA, Potential of Onion Skin, Luffa cylindrica, and Corn Cob as Cellulose Sources: A Study of Their Proximate, Ultimate, and Morphological Properties , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
You may also start an advanced similarity search for this article.
Most read articles by the same author(s)
- Ojochide P. DAMIAN, Fadimatu N. DABAI, Abdulwasiu ABDURRAHMAN, Kamiludeen OLANREWAJU, Bilyamin ABDULMUMIN, Grace A. OLUGBENGA, A Simulation-Driven Strategy for Improved Expandable Polystyrene Synthesis via Multi-Stage Initiator Dosing , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
