Synthesis and Characterization of Laggera aurita-Derived KOH Activated Carbon (LAKOHAC) and Role for the Adsorption of Water-Soluble Fraction of Benzene (WSFB) in Oil-Spilled Water
- Authors
-
-
Bala I. ABDULKARIM
Department of Chemical Engineering, University of Abuja, Abuja, Nigeria
Author
-
Umar IDRISS
Department of Chemical Engineering, University of Maiduguri, Maiduguri, Nigeria
Author
-
- Keywords:
- Laggera aurita, activated carbon, potassium hydroxide, benzene adsorption, oil spill remediation.
- Abstract
-
Chronic oil spills in Nigeria's Niger Delta have caused significant water contamination, particularly by water-soluble fraction of benzene (WSFB) a hazardous carcinogen. This research investigates the development and characterization of potassium hydroxide-activated carbon from Laggera aurita biomass (LAKOHAC) for benzene remediation. The synthesis involved carbonization followed by chemical activation with KOH, with comprehensive characterization using SEM, FTIR, BET surface area analysis, and XRD techniques. FTIR spectroscopy revealed critical functional groups (C-H, C-O, COO⁻, C=O, and O-H) that enable benzene adsorption through multiple mechanisms: π-π interactions, hydrogen bonding, electrostatic attraction, and van der Waals forces. SEM imaging showed a highly porous morphology featuring a honeycomb structure with interconnected pores, surface cracks, and fibrous elements - characteristics that enhance benzene accessibility. Surface defects and roughness provided additional high-energy adsorption sites. Elemental analysis via EDXRF identified potassium (10.66%) and sulfur (0.67%) as dominant elements, along with calcium (0.61%), phosphorus (0.11%), and chlorine (0.58%). These elements facilitate various adsorption mechanisms including cation-π interactions, thiol-mediated hydrogen bonding, and phosphate electrostatic attraction.
- References
- Downloads
- Published
- 01-09-2025
- Section
- Articles
- License
-
Copyright (c) 2025 FUDMA Journal of Engineering and Technology

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Cletus C. OPUTE, Obumneme O. OKWONNA, Comparative Analysis on the Efficiencies of Unmodified Clay and Microorganism-Modified Clay as Adsorbent for the Adsorption of Lead (II) Ions from Wastewater , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Yetunde M. ALADEITAN, Damilola V. ABRAHAM, Abdulmojeed O. OLUOGUN, Abdulwasiu ABDURRAHMAN, A Critical Review of Surrogate Reservoir Modelling for Uncertainty Quantification in Thin Oil Rim Reservoirs , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Esther M. GANA, Umaru MUSA, Abdulsalami S. KOVO, Influence of Process Variables on the Adsorption of Methylene Blue from Aqueous Solution Using Iron-Modified Zeolite A , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Ndagi MAMUDU, Ibrahim S. MOHAMMED, Mohammed ALIYU, Peter DANIEL, Timothy Y. AKANDE, Bala A. GARBA, Development and Performance Evaluation of Biomass Pyrolysis System for Biofuel Production , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Yetunde M. ALADEITAN, Damilola V. ABRAHAM, A Data-Driven Surrogate Framework for Economic Optimization of Thin Oil Rim Developments: A Comprehensive Methodological Review and Niger Delta Application , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Sulaiman Y. ADAMU, Fadimatu N. DABAI, Abdulazeez Y. ATTA, Baba Y. JIBRIL, Preparation and Characterization of Enhanced Hierarchical Zn-Ni/HZSM-5 Catalysts for Potential use in Catalytic reactions to Upgrade Bio-Oil and Hydrogen from Biomass Pyrolysis , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Adefemi O. ADEODU, Banjo C. ADEDOKUN, Amos A. ADEGBITE, Development and Performance Evaluation of an Injection Moulding Machine for Recycled Polymer Composite Production , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Abdulrahman B. GAMBO, Carbon Capture and Mechanical Design of Membrane Reactors: A Systematic Review and Design-Performance Framework for Sustainable Energy Systems , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Chibuzor A. OKAFOR, Bello ABDULKAREEM, Najeem A. YEKEEN, Blessing A. OSULOYE, Yakubu O. HASSAN, Musa J. MAIKATO, Evaluation of the Effects of Charcoal Particle Sizes on Carburized Low Carbon Steel , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Sirajo ALHASSAN, Abdullahi A. ADAMU, Mohammed T. JIMOH, Experimental Characterization and Seasonal Energy Potential Assessment of Municipal Solid Waste in Kano City, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
You may also start an advanced similarity search for this article.
Most read articles by the same author(s)
- Bala I. ABDULKARIM, Yusuf M. BABA, Suleiman I. ENEHE, Kamoru A. SALAM, Umar IDRISS, Synthesis of Activated Carbon from Corncob for the removal of Lead (Pb²⁺) ions from Aqueous solution using a packed bed Adsorption Column , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Bala I. ABDULKARIM, Phebe O. JAMES, Utilization of Microbial Fuel Cells for Electricity Generation from Gwagwalada Abattoir Wastewater , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
