Evaluation of Cost Factors Influencing the Adoption of Sustainable Construction Practices in Abuja, Nigeria
- Authors
-
-
Amina UTHMAN
Department of Quantity Surveying, Federal University of Technology, Minna, Nigeria
Author
-
Shamsuddeen SULAIMAN
Department of Quantity Surveying, Federal University of Technology, Minna, Nigeria
Author
-
- Keywords:
- Cost factors, Financial incentives, Initial capital cost, Sustainable construction, Life-cycle cost.
- Abstract
-
The adoption of sustainable construction practices is crucial in addressing environmental, economic and social concerns in the built environment. However, cost-related factors remain a significant barrier to their widespread implementation, particularly in developing countries like Nigeria. This paper, therefore, seeks to assess the cost factors influencing the adoption of sustainable construction practices in Abuja, Nigeria, with a view to improve cost efficiency. A quantitative research approach was adopted using self-administered questionnaires to collect data from experienced construction professionals registered with the Green Building Council of Nigeria (GBCN). A mixture of purposive and snowball sampling techniques was employed to select professionals with requisite experience and involvement in sustainable construction practice. Data collection was done using a questionnaire survey via self-administered questionnaires to experienced professionals. Data was analyzed using descriptive statistics, which is the relative importance index (RII), to rank the significance of various cost factors. The study revealed that the most significant cost factors include high initial capital costs, the expensive nature of sustainable materials, and limited financial incentives. Other critical cost factors identified include the cost of renewable energy systems, maintenance and operational expenses, poor knowledge of life-cycle costing, project financing challenges, and regulatory compliance costs. Despite these challenges, the study underscores the long-term economic benefits of sustainability through reduced operational costs and increased property value. To promote sustainable construction, the study recommends the development of financial support frameworks, such as grants and low-interest loans, increased availability of local sustainable materials and enhanced education on life-cycle costing to improve awareness through education and training. Addressing these cost factors is essential for fostering a more sustainable and cost-effective construction industry in Abuja, Nigeria.
- References
- Downloads
- Published
- 08-08-2025
- Section
- Articles
- License
-
Copyright (c) 2025 FUDMA Journal of Engineering and Technology

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Habib I. ABDULAZEEZ, Bala ABDULLAHI, Abdullahi AHMED, Ibrahim A. TUKUR, Experimental Investigation of Solar Photovoltaic Tilt Angles for Maximum Energy Harvest in Kogi State, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Danasabe GAMBO, Isyaku YA’U, Tisan A. GREGORY, Development of Free Space Optical Communication Testbed for Fog and Rain Attenuations Measurement , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Abdullahi YAHAYA, Ahmad ADO, Jaju A. MUHAMMAD, Zaharaddeen G. SANI, Baba A. OLUWA, Abdulazeez A. YUSUF, Kinetic Modelling of Sonocatalytic Phenol Degradation over Alumina-Supported Copper Oxide Catalyst , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Olatunde A. AKANO, Wariz A. ISMAEL, Ayomikun A. AWOSEYI, Femi AYO, Ifeoluwa M. OLANIYI, Jide E.T. AKINSOLA, Short Messaging Service Spam Detection Model Using Natural Language Processing and Deep Learning Techniques , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Mukhtar N. YAHYA, Sohaib ALHAJHUSSEIN, Wastewater Analysis Using Kubota Membrane Bioreactor System , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Yusuf L. SHUAIB-BABATA, Kabiru S. AJAO, Yusuf O. BUSARI, Ibrahim O. AMBALI, Toheeb A. NURUDEEN, John A. OKOLO, Gabriel A. LONGE, Inhibitory Potential of Blended Parkia biglobosa and Delonix regia Extracts on Corrosion of AISI 1007 Steel in 1.0 M Hydrochloric Acid Medium , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Yetunde M. ALADEITAN, Damilola V. ABRAHAM, A Data-Driven Surrogate Framework for Economic Optimization of Thin Oil Rim Developments: A Comprehensive Methodological Review and Niger Delta Application , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Sulaiman Y. ADAMU, Fadimatu N. DABAI, Abdulazeez Y. ATTA, Baba Y. JIBRIL, Preparation and Characterization of Enhanced Hierarchical Zn-Ni/HZSM-5 Catalysts for Potential use in Catalytic reactions to Upgrade Bio-Oil and Hydrogen from Biomass Pyrolysis , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Mela I. L. LASHIRU, Ganiyu A. BAKARE, Sabo M. HASSAN, Kamilu O. LAWAL, Data-Driven Observability Enhancement in Active Distribution Networks via Optimal Co-Deployment of DGs and D-PMUs Using Hybrid APSO-ASDA , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Oguntola J. ALAMU, Peter O. ILORI, Seun OYELAMI, Wasiu O. ADEDEJI, Tunji J. ADEPOJU, Abideen T. OYEWO, A Review of the Effect of Post-Processing Heat Treatment on 3D Printed Metal Parts , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
You may also start an advanced similarity search for this article.
