Empirical Load Profiling and Categorisation for a Hybrid Renewable Microgrid Serving an Integrated Farm in Nigeria
- Authors
-
-
Vandi JUSU
Author
-
Eugene O. AGBACHI
Author
-
Jibril A. BALA
Author
-
- Keywords:
- Demand-side management, Empirical load profiling, Hybrid renewable energy, Load criticality, Microgrid.
- Abstract
-
Off-grid hybrid renewable microgrids often serve farms that combine livestock and horticulture, yet published sizing studies rarely distinguish loads that cannot be interrupted without harming animals or crops from those that can. This paper presents an empirical load-profiling and criticality-categorisation study of an integrated farm in Minna, Nigeria, comprising a 400-cow dairy unit, a 25,000-bird layer poultry unit, a 10,000-bird broiler poultry unit, and a 5,000 m² greenhouse. Forty appliances, totalling 320.93 kW of installed capacity, were inventoried and disaggregated into hourly dispatch profiles for the Rainy, Harmattan, and Dry seasons. Each appliance was then classified into three biological-criticality tiers, Tier 1 (never shed), Tier 2 (shed only once battery state of charge falls low), and Tier 3 (fully deferrable), following a review process that checked functional consistency against species-specific thermal risk. The tiered profiles were expanded into three parallel, verified annual series covering all 8,760 hours of the year. Statistical analysis showed that the farm-level annual load factor reaches 0.628, giving a peak-to-average ratio of 1.59. Tier 1 alone showed a lower load factor of 0.446 and a higher peak-to-average ratio of 2.24, and was strongly correlated with the dairy milking schedule. The Tier 1 load duration curve remained above 24 kW for 58.1% of the year and never fell below 13.65 kW, a sustained base-load pattern with direct implications for battery-energy and diesel or biogas backup sizing. The novelty of this study lies in combining appliance-level disaggregation, three-season synthesis, and a physiologically justified three-tier criticality classification for a combined livestock-and-horticulture microgrid. The dataset and classification are recommended as a reusable, empirically grounded input for future research on microgrid sizing, reliability assessment, and demand-side management.
- References
- Downloads
- Published
- 17-10-2026
- Section
- Articles
- License
-
Copyright (c) 2026 Vandi JUSU, Eugene O. AGBACHI, Jibril A. BALA (Author)

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Amina UTHMAN, Shamsuddeen SULAIMAN, Evaluation of Cost Factors Influencing the Adoption of Sustainable Construction Practices in Abuja, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Olalekan OGUNBIYI, Lambe M. ADESINA, Ibrahim Z. ARIYO, Development of an IoT-Based Smart Distribution Transformer Monitoring System for Reliable Rural Electrification , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Usman HASSAN, An Assessment of Management Support Provided to Construction Equipment Operators Regarding Safety Practices and Protocols in Nigeria , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Nsikan L. AKPAN, Akaniyene OBOT, Olusegun A. AFOLABI, Improvement of Power Efficiency of Sensor Network Using Ant Colony Optimization and K-Means Clustering Technique , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Faisal N. YERIMA, Mohammed S. ISMAIL, Murtala ISMAIL, Abdulmalik R. MUSA, Integration of Machine Learning, IoT, and Geofencing for Livestock Management: A Review , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Omokhafe J. TOLA, James G. AMBAFI, Emmanuel C. OBUAH, Isah N. ABUBAKAR, Mutiat S. YISA, Development of Energy-Aware Hamiltonian-Based Fixed-Time Chaos Control and Synchronisation of Brushless DC Motor for Electric Vehicle Application , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Ezekiel O. DARAMOLA, Omolola A. OGBOLUMANI, Artificial Intelligence-Powered Optimisation of Food-Energy-Water Resource Allocation in Nigerian Internally Displaced Persons' Camps , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Obafemi A. IBITOYE, Jemimah O. TOLU-ALALADE, Solar-Powered Low-Cost Housing: Designing Off-Grid Communities with Interlocking Stabilised Soil Blocks (ISSB) , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Muhammad B. MUHAMMAD, Noor S. B. MANSOR, Fariha R. KHAN, Investigating Breakdown Strength Based on Trapping Profile in Cross-Linked Polyethylene (XLPE) Nanocomposites , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Solomon A. ONAZI, Patrick U. OKORIE, Adamu S. ABUBAKAR, Ibrahim ABDULWAHAB, High-Fidelity Wake Modeling for Multi-Turbine Optimization in Complex Terrain: A Review , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
You may also start an advanced similarity search for this article.
