Plastic Waste Challenges in Nigeria: A Review on Pollution, Sorting, and Recycling Approaches
- Authors
-
-
Chioma I. MADUEKE
Author
-
Audu YEMI
Author
-
Joseph M. ABIDEMI
Author
-
Eberechukwu C. DIM
Author
-
- Keywords:
- Plastic waste, recycling, environment, pollution, Nigeria.
- Abstract
-
Plastic waste has become one of the most persistent environmental challenges in Nigeria, rather driven by continuous growth in population, urbanization, industrialization, increasing consumption of packaged goods, and inadequate waste-management infrastructure The widespread use of plastics has become an integral part of modern life, with applications spanning household products, packaging materials, electrical and electronic appliances, structural components, medical devices, and advanced scientific equipment. In Nigeria, plastic consumption has increased substantially without a corresponding improvement in the collection, treatment, and disposal of the resulting waste. The problem is particularly pronounced in major commercial centers such as Lagos, Kano, Port Harcourt, Aba in Abia State, Onitsha in Anambra State, and other densely populated commercial areas across the country. Common plastic wastes include polyethylene bags, polyethylene terephthalate (PET) bottles, high-density polyethylene (HDPE) sachets used for packaged water, polystyrene disposable food containers and cutlery, polypropylene products such as broken chairs, low-density polyethylene (LDPE) shrink wraps, and numerous other materials belonging to the polymer family. The indiscriminate disposal of these materials has created serious environmental challenges in many communities. Plastic waste often accumulates in streets and drainage channels, obstructing water flow and providing suitable breeding grounds for mosquitoes, thereby contributing to environmental and public-health concerns. This article examines the environmental and ecological hazards associated with plastic waste and reviews both immediate and long-term strategies for reducing plastic pollution, highlighting sustainable approaches for improving waste management, safeguarding the environment, and protecting the lives of plants and animals. This review is more of a narrative review than other types, as this work mostly dwells on discussions on plastic pollution, sources, sorting, recycling, environmental impacts, economic value and recycling approaches by selecting relevant studies and discussing them systematically with findings synthesized qualitatively and research gaps highlighted.
- References
- Downloads
- Published
- 11-10-2026
- Section
- Articles
- License
-
Copyright (c) 2026 Chioma I. MADUEKE, Audu YEMI, Joseph M. ABIDEMI, Eberechukwu C. DIM (Author)

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Hammed A. OLASUNKANMI, Olumuyiwa I. ADENIJI, Mufutau K. LAWAL, Babatola E. OJO, Babayemi D. OMOWOLE, Somtochukwu E. AVAH, Isiaka A. ADELEKE, Kudirat N. POPOOLA, Ademidun E. IBITOYE, Design and Implementation of a Secure AI-Based Product Showcase and Customer Support System for Small and Medium-Sized Enterprises , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- John O. NWODO, Toyin Y. AKANBI, Hassan K. ABDULRASHEED, Experimental Analysis of Early Compressive Strength of Sandcrete Block Blended with Rice Husk Ash and Activated with Soda Ash , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Ruth R. ADELAJA, Rhoda I. ADELAJA, Henry OTOBRISE, Adefope OWOJORI, Babatunde ADEBO, Investigation of Indoor Radiation Levels within Lead City University’s Academic Buildings , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Mohammed U. GARBA, Musa A. ABDULLAHI, Isah RABI, Saadatu A. GORO, Habibu UTHMAN, Abubakar S. MOHAMMED, Umaru AHMADU, Usman S. ONODUKU, Recovery of Lithium Carbonate from Nigerian Lepidolite Ore via Roasting-Leaching-Precipitation , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Abimbola J. KOLAWOLE, AbdulKodri G. ABDULRAFIU, An Evaluation of the Challenges and Limitations in the Adoption of Technological Innovations at Nnamdi Azikiwe International Airport , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Bala I. ABDULKARIM, Yusuf M. BABA, Suleiman I. ENEHE, Kamoru A. SALAM, Umar IDRISS, Synthesis of Activated Carbon from Corncob for the removal of Lead (Pb²⁺) ions from Aqueous solution using a packed bed Adsorption Column , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Bala ABDULLAHI, Bala G. ABDURRAHMAN, Yusuf ALHASAN, Saidu B. ABUBAKAR, Bashir I. KUNYA, Raya K. ALDADAH, Saad MAHMOUD, Ahmed REZK, Effects of Truncating the Height of Compound Parabolic Collector on its Geometry, Optical and Thermal Performances , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Aminu D. MAHMUD, Imran N. IBRAHIM, Development and Optimization of Starch-Based Bioplastics from Millet and Cassava Using Mixture Design Approach , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Mohammed A. GANA, Zaka A. MSHELIA, Isuwa S. AJI, Alhaji GUJJA, Lawan A.M. KOLO, Investigation and Comparative Analysis of Natural Moulding Sands from Five Deposits in Maiduguri, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Enoch ADETONA, Oladiran K. ABUBAKRE, Rasheed A. MURIANA, Muhammad N. BALA, Abel A. ADEYI, Evaluation of Animal Dungs as Alternative Heat-Treating Materials in Foundry Shop , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
You may also start an advanced similarity search for this article.
Most read articles by the same author(s)
- Chioma I. MADUEKE, Reginald UMUNAKWE, Oluwole D. ADIGUN, An Evaluation of the Porosity and Pore Volume Fractions of Coir Fibres in Relation to Their Diameters and Tensile Properties at a Crosshead Displacement Rate of 0.5 mm/Minute for Composite Applications , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
