Development of a Non-Convex Economic Load Dispatch Across Small to Very Large-Scale Power Systems Using Improved Sine Cosine Algorithm
- Authors
-
-
Abdultoyyib A. ALABI
Author
-
Adamu S. ABUBAKAR
Author
-
Patrick U. OKORIE
Author
-
Abdulwahab IBRAHIM
Author
-
- Keywords:
- Convergence Analysis, Economic Load Dispatch, Improved Sine Cosine Algorithm, Large-Scale Optimization, Power Systems, Robustness, Valve-Point Loading Effect.
- Abstract
-
The Economic Load Dispatch (ELD) problem is fundamental to power system operation, requiring the optimal allocation of generation among committed units to minimize fuel cost while satisfying demand and operational constraints. The incorporation of valve-point loading effects (VPLE) introduces non-convex and multimodal characteristics that can cause conventional and standard metaheuristic optimization methods to become trapped in local optima. This study proposes an Improved Sine Cosine Algorithm (ISCA) for solving non-convex ELD problems with VPLE across small-, medium-, large-, and very large-scale power systems. The novelty of ISCA lies in the integration of three complementary mechanisms into the conventional Sine Cosine Algorithm: (i) an adaptive parameter control strategy that dynamically regulates exploration and exploitation, (ii) a Lévy flight-based search mechanism that improves global exploration and facilitates escape from local optima, and (iii) an enhanced power-balance adjustment strategy that enforces the supply-demand equality constraint with high numerical precision. The proposed algorithm is evaluated on five benchmark systems comprising 3, 13, 40, 80, and 140 generating units, with load demands of 850, 2,520, 10,500, 21,000, and 49,342 MW, respectively. For each test system, 30 independent runs are conducted to evaluate solution quality, convergence behavior, robustness, and constraint satisfaction using best and statistical fuel-cost measures, convergence characteristics, cost distributions, and power-balance errors. ISCA obtained best fuel costs of 8,284.67 USD/h, 21,670.76 USD/h, 90,158.27 USD/h, 182,013.39 USD/h, and 428,106.68 USD/h for the 3-, 13-, 40-, 80-, and 140-unit systems, respectively. The observed standard deviations were as low as 0.01 USD/h for the smaller system and remained below 0.05% of the corresponding total generation cost for the 140-unit system, indicating stable performance across repeated runs. In addition, power-balance errors remained below 10⁻¹³ MW, demonstrating accurate satisfaction of the equality constraint. Comparative analysis across the benchmark systems indicates that the proposed enhancements improve the search capability and solution consistency of the conventional SCA, particularly as problem dimensionality increases. Overall, the results demonstrate that ISCA provides a robust and scalable optimization framework for non-convex ELD with VPLE. However, its computational competitiveness should be assessed alongside solution quality using runtime or function-evaluation measures and statistically validated comparisons with established algorithms.
- References
- Downloads
- Published
- 25-09-2026
- Section
- Articles
- License
-
Copyright (c) 2026 Abdultoyyib A. ALABI, Adamu S. ABUBAKAR, Patrick U. OKORIE, Abdulwahab IBRAHIM (Author)

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Olusola K. AKINDE, Abolaji O. ILORI, Habeeb A. ARIKEWUYO, Development of a Wearable Fall Sensing Device for Enhanced Independent Living Among the Elderly , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Abdullahi P. NUHU, Kabir O. YUSUF, Aliyu O. ABDULRAHMAN, Kehinde A. LASISI, Effect of Heat Treatment on Post Weld Railway Track , FUDMA Journal of Engineering and Technology: Vol. 1 No. 1 (2025): July 2025
- Yetunde M. ALADEITAN, Damilola V. ABRAHAM, Abdulmojeed O. OLUOGUN, Abdulwasiu ABDURRAHMAN, A Critical Review of Surrogate Reservoir Modelling for Uncertainty Quantification in Thin Oil Rim Reservoirs , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Abubakar A. IBRAHIM, Fatimah Y. GARBA, Fatimah A. MUHAMMAD, Ismail B. ADEFESO, Bello A. ISAH, Jacob OLAYIWOLA, Industrial and Biomedical Applications Biobased Polymers of Polylactic Acid and Polyhydroxybutyrate: A Review , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Haris A. DANLADI, Umar Y. MUHAMMAD, Idris Y. IDRIS, Zaharaddeen MUSA, IoT-Based Solar-Powered Flood Early Warning System: Design and Evaluation at Alau Dam, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Abdulkarim AMINU, Mohammed ALIYU, Ibrahim S. MOHAMMED, Iyanda M. ANIMASHAUN, Peter DANIEL, Mohammad USMAN, Production and Optimisation of Parameters for Density and Ash Content of Briquettes Produced from Sorghum Stalks and Groundnut Shells Using African Locust Bean (Parkia biglobosa) Pulp as a Binding Agent , FUDMA Journal of Engineering and Technology: Vol. 1 No. 1 (2025): July 2025
- Iliya D. IBRAHIM, Suleiman A. BABALE, Sani H. LAWAN, Auwal A. ABUBAKAR, Design of a Modified Wideband Microstrip Patch Antenna for WLAN/WiMAX Applications , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Zachariah S. PYENDANG, Felix ACHEMA, Isheni YAKUBU, Solomon E. APEH, Microstructural Characterization of Fibre Reinforced Polymer (FRP) Composite (Kenaf Fibre and Polyester Resin) for Structural Applications , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Titilope A. BANJOKO, Bilkisu L. MUHAMMAD-BELLO, Predicting Requirement Change Using Bayesian Networks on Historical Traceability Data , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Ibrahim A. KUTI, Sunday E. OGUNMOLA, Peter A. ADEOYE, Evaluation of the Agricultural Best Management Practices (ABMPs) and Their Effect on Discharge Reduction of Shiroro Dam Site using SWAT Model , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
You may also start an advanced similarity search for this article.
Most read articles by the same author(s)
- Solomon A. ONAZI, Patrick U. OKORIE, Adamu S. ABUBAKAR, Ibrahim ABDULWAHAB, High-Fidelity Wake Modeling for Multi-Turbine Optimization in Complex Terrain: A Review , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
