Valorisation of Non-Citrus Lignocellulosic Leaf Waste for Limonene Production Using Calcium Hydroxide-Catalysed Thermal Ethanolysis
- Authors
-
-
Haruina IBRAHIM
Author
-
Abubakar M. ALI
Author
-
Mohammed D. JIBRIN
Author
-
- Keywords:
- Alkaline catalysis; Biomass valorisation; Box–Behnken design; Gmelina arborea; Limonene.
- Abstract
-
The increasing demand for sustainable and renewable sources of industrial chemicals has intensified interest in the valorisation of lignocellulosic biomass into value-added products such as monoterpenes. This study investigates the production of limonene from Gmelina arborea leaf waste via a calcium hydroxide–catalysed thermal Ethanolytic process operated under mild conditions. A three-factor Box–Behnken design within the framework of Response Surface Methodology (RSM) was employed to evaluate the effects of reaction temperature (40-60 oC), reaction time (40–60 min), and catalyst loading (1-2 wt.%) on limonene yield, and to develop a predictive quadratic model for process optimisation. Experimental results revealed significant variation in limonene yield (18.75-351.07 mg/g), with a maximum yield of 6.78% (351.07 mg/g) achieved at 40 oC, 50 min, and 2% catalyst loading. Analysis of variance (ANOVA) indicated that the model was highly significant (p < 0.0001) with a high coefficient of determination (R2 = 0.974), confirming strong agreement between experimental and predicted values. All process variables exhibited significant linear and quadratic effects, while interaction effects between temperature–time and temperature–catalyst loading were also notable. Reproducibility assessment using replicated centre-points yielded a low coefficient of variation (CV = 2.25%), demonstrating excellent experimental precision and reliability. GC-MS analysis confirmed the successful formation of limonene, while the results showed that lower temperatures favour product stability by minimising thermal degradation and volatilisation losses. Although the yield is lower than that obtained from citrus-derived sources, this study demonstrates the technical feasibility of producing limonene from non-citrus lignocellulosic biomass using a low-energy catalytic process. The findings highlight the potential of Gmelina arborea leaves as an alternative renewable feedstock and contribute to advancing sustainable biomass conversion strategies within a circular bioeconomy framework.
- References
- Downloads
- Published
- 25-09-2026
- Section
- Articles
- License
-
Copyright (c) 2026 Haruina IBRAHIM, Abubakar M. ALI, Mohammed D. JIBRIN (Author)

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Yetunde M. ALADEITAN, Damilola V. ABRAHAM, A Data-Driven Surrogate Framework for Economic Optimization of Thin Oil Rim Developments: A Comprehensive Methodological Review and Niger Delta Application , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Paramdi S. ABARI, Abdulwahab O. AUDU, Ahmad-Tijani USMAN, Charity T. METIBOBA, Peter O. ANIKOH, Performance Evaluation and Design Analysis of Hybrid Constructed Wetlands for Aquaculture Effluent Treatment under Tropical Conditions , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Aminu D. MAHMUD, Imran N. IBRAHIM, Development and Optimization of Starch-Based Bioplastics from Millet and Cassava Using Mixture Design Approach , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Haris A. DANLADI, Umar Y. MUHAMMAD, Idris Y. IDRIS, Zaharaddeen MUSA, IoT-Based Solar-Powered Flood Early Warning System: Design and Evaluation at Alau Dam, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Hyelni G. MSHELIA, Abdulfatai JIMOH, Mohammed A. EVUTI, Abubakar A. IBRAHIM, Abdulwahab GIWA, Adeola G. OLUGBENGA, Potential of Onion Skin, Luffa cylindrica, and Corn Cob as Cellulose Sources: A Study of Their Proximate, Ultimate, and Morphological Properties , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Abubakar S. MOHAMMED, Mohammed ALIYU, Mohammed U. GARBA, Ibrahim S. MOHAMMED, Ibrahim A. KUTI, Meshack S. IMOLOGIE, Umaru MUSA, Olalekan D. ADENIYI, Peter A. ADEOYE, Abubakar G. ISAH, Folarin T. OLORUNMOTITO, Development and Packaging of Eco-friendly Biosolid Briquettes Synthesised with Bagasse for Green Energy Generation and Utilisation , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Osemwegie IKPONMWOSA-EWEKA, Alexander I. IDEMUDIA, Predicting Convective Heat Transfer Coefficient in TIG Welding via Adaptive Neuro-Fuzzy Inference System (ANFIS) , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Suleiman ZUBAIR, Hassan T. ABDULAZEEZ, Bala A. SALIHU, Gambo MOHAMMED, A Low-Cost, Offline-Capable Wireless Soil Moisture Monitoring System for Smallholder Farmers: Design, Validation, and Agronomic Impact , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Zaharaddeen MUSA, Aliyu BELLO, Haris A. DANLADI, Design and Construction of Dual Input Mobile Solar Generator for Reliable Off-Grid Power , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Sirajo ALHASSAN, Abdullahi A. ADAMU, Mohammed T. JIMOH, Multi-Criteria Decision Analysis and Optimization Approaches in Sustainable Waste-to-Energy Planning: A Systematic Review , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
You may also start an advanced similarity search for this article.
Most read articles by the same author(s)
- Abubakar M. ALI, Haruna IBRAHIM, Ephraim G. KEFAS, Thermal Plasma Gasification of Municipal Solid Waste: Principles, Technological Advances, Challenges, and Future Prospects , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
