Valorisation of Non-Citrus Lignocellulosic Leaf Waste for Limonene Production Using Calcium Hydroxide-Catalysed Thermal Ethanolysis
- Authors
-
-
Haruina IBRAHIM
Author
-
Abubakar M. ALI
Author
-
Mohammed D. JIBRIN
Author
-
- Keywords:
- Alkaline catalysis; Biomass valorisation; Box–Behnken design; Gmelina arborea; Limonene.
- Abstract
-
The increasing demand for sustainable and renewable sources of industrial chemicals has intensified interest in the valorisation of lignocellulosic biomass into value-added products such as monoterpenes. This study investigates the production of limonene from Gmelina arborea leaf waste via a calcium hydroxide–catalysed thermal Ethanolytic process operated under mild conditions. A three-factor Box–Behnken design within the framework of Response Surface Methodology (RSM) was employed to evaluate the effects of reaction temperature (40-60 oC), reaction time (40–60 min), and catalyst loading (1-2 wt.%) on limonene yield, and to develop a predictive quadratic model for process optimisation. Experimental results revealed significant variation in limonene yield (18.75-351.07 mg/g), with a maximum yield of 6.78% (351.07 mg/g) achieved at 40 oC, 50 min, and 2% catalyst loading. Analysis of variance (ANOVA) indicated that the model was highly significant (p < 0.0001) with a high coefficient of determination (R2 = 0.974), confirming strong agreement between experimental and predicted values. All process variables exhibited significant linear and quadratic effects, while interaction effects between temperature–time and temperature–catalyst loading were also notable. Reproducibility assessment using replicated centre-points yielded a low coefficient of variation (CV = 2.25%), demonstrating excellent experimental precision and reliability. GC-MS analysis confirmed the successful formation of limonene, while the results showed that lower temperatures favour product stability by minimising thermal degradation and volatilisation losses. Although the yield is lower than that obtained from citrus-derived sources, this study demonstrates the technical feasibility of producing limonene from non-citrus lignocellulosic biomass using a low-energy catalytic process. The findings highlight the potential of Gmelina arborea leaves as an alternative renewable feedstock and contribute to advancing sustainable biomass conversion strategies within a circular bioeconomy framework.
- References
- Downloads
- Published
- 25-09-2026
- Section
- Articles
- License
-
Copyright (c) 2026 Haruina IBRAHIM, Abubakar M. ALI, Mohammed D. JIBRIN (Author)

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Oluyemi S. ONIFADE, Olusegun O. AJIDE, Development and Performance Evaluation of a Semi-Automated Impact Fracture Tester , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Anthony U. AINETOR, Martins ILEVBARE, Awareness of the Availability and Use of Domestic Control Systems and Automation among the University of Benin Resident Staff , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Olawale J. OLALUYI, Johnson O. ADEOGO, Adeniyi O. AJIBOYE, Mayowa O. ORESELU, Olarewaju T. OGINNI, Application of Machine Learning for Enhancing Fake Logo Detection , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Daniel N. MBACHIRIN, David E. ABEL, Paul A. OMALE, Precision Agriculture Technologies for Smallholder Farming Systems in Developing Countries: A Scoping Review of Opportunities, Limitations and Future Directions , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Muhammad M. HAMIDU, Development of MATLAB-Based Model for Solar Radiation Prediction and Photovoltaic Panel Tilt Optimization Angle for Maiduguri Region, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Isaac O. UKRAKPO, Osemwegie IKPONMWOSA-EWEKA, Prediction of Weld Strain Using Artificial Neural Network: A Modeling Approach , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
You may also start an advanced similarity search for this article.
Most read articles by the same author(s)
- Abubakar M. ALI, Haruna IBRAHIM, Ephraim G. KEFAS, Thermal Plasma Gasification of Municipal Solid Waste: Principles, Technological Advances, Challenges, and Future Prospects , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
