Solar Irradiance Forecast using Feed Forward Neural Network: A Case Study of Zaria Town
- Authors
-
-
Ismaila MAHMUD
Department of Electrical Engineering, Ahmadu Bello University, Zaria, Nigeria
Author
-
Mahmud MUSTAPHA
Department of Electrical/Electronic Engineering, Nuhu Bamalli Polytechnic, Zaria, Kaduna State, Nigeria
Author
-
Sulaiman H. SULAIMAN
Department of Electrical Engineering, Ahmadu Bello University, Zaria, Nigeria
Author
-
Ibrahim ABDULWAHAB
Department of Electrical Engineering, Ahmadu Bello University, Zaria, Nigeria
Author
-
Ibrahim A. SHEHU
Department of Electrical Engineering, Ahmadu Bello University, Zaria, Nigeria
Author
-
Aminu J. ALIYU
Department of Electrical Engineering, Ahmadu Bello University, Zaria, Nigeria
Author
-
Yusuf S. ABU
Department of Electrical/Electronic Engineering, Federal University Dutsin-Ma, Katsina State, Nigeria
Author
-
Nuraddeen A. ILIYASU
Department of Electrical Engineering, Ahmadu Bello University, Zaria, Nigeria
Author
-
- Keywords:
- Solar irradiance, forecast, feed forward neural network, renewable energy consolidation.
- Abstract
-
This study aims to forecast solar irradiation using Artificial Neural Network (ANN), with the goal of developing a high-performance prediction model based on real meteorological data. Lack of sufficient meteorological data in Nigeria necessitate the development of model to forecast solar irradiance for optimal utilization. The model is designed to predict daily solar irradiation for Zaria town, providing valuable insights to the utilities managing solar energy generation and monitoring systems. Feed forward Neural Network (FFNN) was applied to perform day-ahead solar irradiance forecasting. We employ a day-ahead persistence model as a baseline, a commonly used method in solar irradiance forecasting research. It operates under the assumption that current conditions will persist over the forecast horizon. Specifically, it uses the irradiance values from the previous day as the predictions for the following day. The findings highlight the significance of meteorological factors (such as minimum humidity, maximum temperature, day, month, and wind direction) in the FFNN model training. Root Mean Square Error (RMSE) and Mean Absolute Error (MAE) were used to evaluate the performance of the model. The RMSE of 4.46 W/m² and MAE of 2.52 W/m² obtained indicate an excellent performance of the FFNN model. The model outperformed the Persistence model in predicting daily solar irradiance, indicating its superiority solar irradiance forecast. The results show the ability of the model to forecast day – ahead solar irradiance in Zaria town which can address the issue of non-recorded meteorological data.
- References
- Downloads
- Published
- 08-08-2025
- Section
- Articles
- License
-
Copyright (c) 2025 FUDMA Journal of Engineering and Technology

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Bala I. ABDULKARIM, Umar IDRISS, Synthesis and Characterization of Laggera aurita-Derived KOH Activated Carbon (LAKOHAC) and Role for the Adsorption of Water-Soluble Fraction of Benzene (WSFB) in Oil-Spilled Water , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Luqman K. SALATI, Sani D. MUHAMMAD, Jacob T. ADEYEMO, Simulation of Trucks Haulage Operation at Ashaka Cement Company in Gombe State, North-Eastern Nigeria , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Vincent B. ONIGBARA, Muftau A. GBENLE, Sunday I. AGU, Mechanical and Biological Performance of Titanium Hydroxyapatite Composites for Biomedical Applications , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Jamesmary E. AYANRU, Matthew S. ABOLARIN, Omotayo I. OGUNWEDE, Henry I. MORKAH, Adeshola O. OPENIBO, Development and Performance Evaluation of a Dryer for Preserving Vegetable Leaves , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Sulaiman Y. ADAMU, Fadimatu N. DABAI, Abdulazeez Y. ATTA, Baba Y. JIBRIL, Preparation and Characterization of Enhanced Hierarchical Zn-Ni/HZSM-5 Catalysts for Potential use in Catalytic reactions to Upgrade Bio-Oil and Hydrogen from Biomass Pyrolysis , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Bala I. ABDULKARIM, Phebe O. JAMES, Utilization of Microbial Fuel Cells for Electricity Generation from Gwagwalada Abattoir Wastewater , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Salisu MOHAMMED, Abdulfatai JIMOH, Abdullahi M. EVUTI, Abdulwahab GIWA, Abubakar A. IBRAHIM, Pretreatment and Characterization of Selected Precursors for Chitin/Chitosan Production , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Ibrahim BALA, Solomon M. DAUDA, Audu A. BALAMI, Peter A. IDAH, Design Analysis of a Kenaf Decorticating Machine , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Mohammed U. GARBA, Musa A. ABDULLAHI, Isah RABI, Saadatu A. GORO, Habibu UTHMAN, Abubakar S. MOHAMMED, Umaru AHMADU, Usman S. ONODUKU, Recovery of Lithium Carbonate from Nigerian Lepidolite Ore via Roasting-Leaching-Precipitation , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Oluwasanmi S. ADANIGBO, Opeyemi O. ASAOLU, Adedayo A. SOBOWALE, Temidayo AKINDAHUNSI, Akinbayode A. ASAOLU, Intrusion Detection in Mobile Adhoc Networks: A Review of Signature-Based, Anomaly-Based, and Hybrid Approaches , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
You may also start an advanced similarity search for this article.
