Smart Fence for Real-Time Farm Protection in Sub-Saharan Africa Using Artificial Intelligence: A Systematic Review and Research Roadmap
- Authors
-
-
Omokhafe J. TOLA
Author
-
James G. AMBAFI
Author
-
Umar S. DAUDA
Author
-
- Keywords:
- Initial void ratio, natural moisture content, settlement, compression ratio, one-dimensional consolidation.
- Abstract
-
Agricultural insecurity from wildlife encroachment and crop raiding threatens food production in Sub-Saharan Africa (SSA), where 60% of smallholder farmers rely on agriculture. Conventional barbed wire and electric fences are passive, static, and poorly suited for rural SSA's resource-constrained environments. This paper presents a systematic review of smart fence technologies for real-time farm protection, adhering to PRISMA 2020 guidelines. From an initial 1,247 documents across IEEE Xplore, ScienceDirect, SpringerLink, and Google Scholar, 56 peer-reviewed studies (2008–2026) were selected for synthesis following title and abstract screening, duplication, and full-text eligibility assessment. The review classifies smart fences into four categories: sensor-based, vision-based, IoT-based, and hybrid AIoT-based. Under controlled conditions, YOLOv8 models outperformed others with over 92% detection accuracy. For edge deployments, MobileNetV3 achieved 85.7% accuracy on commodity hardware, consuming only 3.1 W. Critically, the study found no smart fence deployments in the literature validated specifically for SSA, highlighting a major gap given the region's unique infrastructural challenges. Key contributions of this paper include: (i) synthesizing AI and smart fence performance benchmarks; (ii) establishing a 12-factor matrix quantifying SSA deployment constraints by severity, prevalence, and technology readiness; (iii) proposing an SSA-specific edge-AI reference architecture optimized for solar power, low connectivity, and a sub-$400 deployment cost; and (iv) outlining a structured 3-level research roadmap aligned with TRL 4-9 milestones. This review provides a solid foundation for developing cost-effective, context-aware smart fencing tailored to SSA's agricultural realities.
- References
- Downloads
- Published
- 08-09-2026
- Section
- Articles
- License
-
Copyright (c) 2026 Omokhafe J. TOLA, James G. AMBAFI, Umar S. DAUDA (Author)

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Yetunde M. ALADEITAN, Damilola V. ABRAHAM, A Data-Driven Surrogate Framework for Economic Optimization of Thin Oil Rim Developments: A Comprehensive Methodological Review and Niger Delta Application , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Ismaila MAHMUD, Mahmud MUSTAPHA, Sulaiman H. SULAIMAN, Ibrahim ABDULWAHAB, Ibrahim A. SHEHU, Aminu J. ALIYU, Yusuf S. ABU, Nuraddeen A. ILIYASU, Solar Irradiance Forecast using Feed Forward Neural Network: A Case Study of Zaria Town , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Yetunde M. ALADEITAN, Damilola V. ABRAHAM, Abdulmojeed O. OLUOGUN, Abdulwasiu ABDURRAHMAN, A Critical Review of Surrogate Reservoir Modelling for Uncertainty Quantification in Thin Oil Rim Reservoirs , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Afeez A. AWOLOKUN, Olusegun O. ALUKO, Temitope F. AWOLUSI, Mayowa A. OGIDI, Performance Evaluation of Pervious Concrete Containing Glass Cullet and Glass Powder for Sustainable Construction , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Opeyemi O. ASAOLU, Tomilayo F. ADEBIYI, Kazeem M. OLAGUNJU, TextCNN and Gated Recurrent Unit(GRU) with Additive Attention for Character-Level Yoruba Spell Correction , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Kazeem A. BELLO, Adeniyi O. ADESINA, Lukman A. OPEYEMI, Solomon O. UVIASE, Francis O. BOROKINNI, Friday ONUH, Tunde O. OGUNDANA, Adebayo I. OLUMOROTI, Developments and Applications of Additive Manufacturing in the Automotive Industry , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Johnson O. ADEOGO, Olawale J. OLALUYI, Olumuyiwa A. OJO, Abayomi T. AYODELE, Elijah A. OLAJUYIN, Fasasi BELLO, Paul C. OFODU, Performance Evaluation of 3.5 kVA Hybrid Inverter Following Standard Engineering Practices and Safety Procedures , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Tina I. FRANCIS-AKILAKI, Onimi O. ASHAMA, Raymond A. EKEMUBE, Vibration Analysis as a Transformative Approach to Condition-Based Monitoring , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Johnson O. ADEOGO, Examination of Electromagnetic Radiation Intensity of 5G Mobile Transceivers Based on Its Operational Techniques , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Bala I. ABDULKARIM, Phebe O. JAMES, Utilization of Microbial Fuel Cells for Electricity Generation from Gwagwalada Abattoir Wastewater , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
You may also start an advanced similarity search for this article.
Most read articles by the same author(s)
- Omokhafe J. TOLA, Garba AMBAFI, Emmanuel C. OBUAH, Isah N. ABUBAKAR, Mutiat S. YISA, Development of Energy-Aware Hamiltonian-Based Fixed-Time Chaos Control and Synchronisation of Brushless DC Motor for Electric Vehicle Application , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
