Agro-Hydrological Modelling Systems in Peninsula Malaysia: A Comprehensive Review and a Guide towards Model Development
- Authors
-
-
Muazu D. ZAKARI
Department of Biological and Agricultural Engineering, Faculty of Engineering, Universiti Putra Malaysia, Serdang 43400, Malaysia
Author
-
Md R. KAMAL
Department of Biological and Agricultural Engineering, Faculty of Engineering, Universiti Putra Malaysia, Serdang 43400, Malaysia
Author
-
Wada I. MUHAMMAD
Department of Agricultural Engineering, Federal University, Wukari, Nigeria
Author
-
Nuraddeen M. NASIDI
Agricultural and Environmental Engineering Department, Faculty of Engineering, Bayero University, Kano, Nigeria
Author
-
Dahiru MOHAMMED
Department of Agricultural and Bio-Environmental Engineering, Kaduna Polytechnic, Kaduna, Nigeria
Author
-
- Keywords:
- Agro-hydrological, modelling, climate change, water management, Peninsula Malaysia.
- Abstract
-
Agro-hydrological modelling systems play a vital role in understanding and managing water resources in agricultural landscapes. Incorporating hydrological processes and agricultural practices through modelling systems is essential for sustainable land and water management in Peninsula Malaysia, where agriculture is a significant industry. This article provides an overview of the agro-hydrological modelling systems implemented in Peninsula Malaysia and their applications, strengths, limitations, and future research directions. Various paper publications were considered, including papers listed in the Scopus database. Based on the findings, a key gap identified in Peninsula Malaysia is that the application of agro-hydrological modelling systems is still in its early stages. Additionally, few models incorporate long-term climate change projections and adaptive water management strategies. To address these limitations, the review proposes a flow chart for model setup and input data. These techniques, however, have the potential to significantly improve water management in the region. This paper aims to assist policymakers, researchers, and other stakeholders in making informed decisions about water management strategies in agricultural landscapes and to provide future research direction on agro-hydrological modelling.
- References
- Downloads
- Published
- 08-08-2025
- Section
- Articles
- License
-
Copyright (c) 2025 FUDMA Journal of Engineering and Technology

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Sani MAMOUDOU, Abdulmumin A. SHUAIBU, Aliyu USMAN, Evaluation of Nano-Hydroxyapatite/Nano-Kaolin Composite Additives on the Physical Properties of Hot Mix Asphalt Binder , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Kazeem A. BELLO, Adeniyi O. ADESINA, Lukman A. OPEYEMI, Solomon O. UVIASE, Francis O. BOROKINNI, Friday ONUH, Tunde O. OGUNDANA, Adebayo I. OLUMOROTI, Developments and Applications of Additive Manufacturing in the Automotive Industry , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Umar A. ADAMU, Ya’u S. HARUNA, Ganiyu A. BAKARE, Buhari H. MAMMAN, Kunduli MUSTAPHA, Hadi M. ADAMU, Ismaila MAHMUD, Design and Simulation of a 200 MWp Floating Solar PV Plant Integrated with the Kainji Hydropower Plant, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Omolola A. OGBOLUMANI, Benita AGBAGWARA, Blockchain-Based Traceability and Peer-to-Peer Trading for Urban Fish Farming , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Paramdi S. ABARI, Abdulwahab O. AUDU, Ahmad-Tijani USMAN, Charity T. METIBOBA, Peter O. ANIKOH, Performance Evaluation and Design Analysis of Hybrid Constructed Wetlands for Aquaculture Effluent Treatment under Tropical Conditions , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Hammed A. OLASUNKANMI, Olumuyiwa I. ADENIJI, Mufutau K. LAWAL, Babatola E. OJO, Babayemi D. OMOWOLE, Somtochukwu E. AVAH, Isiaka A. ADELEKE, Kudirat N. POPOOLA, Ademidun E. IBITOYE, Design and Implementation of a Secure AI-Based Product Showcase and Customer Support System for Small and Medium-Sized Enterprises , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Musibaudeen O. IDRIS, Busayo S. ADEBOYE, Rasheedah A. AYOOLA, Abiodun G. ABIOYE, Abideen T. OYEWO, An Artificial Neural Network-Based Quality Control Framework for Nigerian Manufacturing Industries , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Olusola K. AKINDE, Abolaji O. ILORI, Habeeb A. ARIKEWUYO, Development of a Wearable Fall Sensing Device for Enhanced Independent Living Among the Elderly , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Babagoni A. ADAM, Muhammad B. MAINA, Muhammad SHUWA, Abba B. MUHAMMAD, A Review on Neem Leaves Valorization Through Advanced Briquetting and Carbonization Technologies , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Mela I. L. LASHIRU, Ganiyu A. BAKARE, Sabo M. HASSAN, Kamilu O. LAWAL, Data-Driven Observability Enhancement in Active Distribution Networks via Optimal Co-Deployment of DGs and D-PMUs Using Hybrid APSO-ASDA , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
You may also start an advanced similarity search for this article.
