Agro-Hydrological Modelling Systems in Peninsula Malaysia: A Comprehensive Review and a Guide towards Model Development
- Authors
-
-
Muazu D. ZAKARI
Department of Biological and Agricultural Engineering, Faculty of Engineering, Universiti Putra Malaysia, Serdang 43400, Malaysia
Author
-
Md R. KAMAL
Department of Biological and Agricultural Engineering, Faculty of Engineering, Universiti Putra Malaysia, Serdang 43400, Malaysia
Author
-
Wada I. MUHAMMAD
Department of Agricultural Engineering, Federal University, Wukari, Nigeria
Author
-
Nuraddeen M. NASIDI
Agricultural and Environmental Engineering Department, Faculty of Engineering, Bayero University, Kano, Nigeria
Author
-
Dahiru MOHAMMED
Department of Agricultural and Bio-Environmental Engineering, Kaduna Polytechnic, Kaduna, Nigeria
Author
-
- Keywords:
- Agro-hydrological, modelling, climate change, water management, Peninsula Malaysia.
- Abstract
-
Agro-hydrological modelling systems play a vital role in understanding and managing water resources in agricultural landscapes. Incorporating hydrological processes and agricultural practices through modelling systems is essential for sustainable land and water management in Peninsula Malaysia, where agriculture is a significant industry. This article provides an overview of the agro-hydrological modelling systems implemented in Peninsula Malaysia and their applications, strengths, limitations, and future research directions. Various paper publications were considered, including papers listed in the Scopus database. Based on the findings, a key gap identified in Peninsula Malaysia is that the application of agro-hydrological modelling systems is still in its early stages. Additionally, few models incorporate long-term climate change projections and adaptive water management strategies. To address these limitations, the review proposes a flow chart for model setup and input data. These techniques, however, have the potential to significantly improve water management in the region. This paper aims to assist policymakers, researchers, and other stakeholders in making informed decisions about water management strategies in agricultural landscapes and to provide future research direction on agro-hydrological modelling.
- References
- Downloads
- Published
- 08-08-2025
- Section
- Articles
- License
-
Copyright (c) 2025 FUDMA Journal of Engineering and Technology

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Aminu D. MAHMUD, Imran N. IBRAHIM, Development and Optimization of Starch-Based Bioplastics from Millet and Cassava Using Mixture Design Approach , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Ferguson H. TOBINS, Ishiaka S. ARUDI, Abdulhakeem H. NURUDEEN, Snail Shell-Clay Ceramic Composites as Sustainable Raw Materials for High-Voltage Insulators , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Sirajo ALHASSAN, Abdullahi A. ADAMU, Mohammed T. JIMOH, Multi-Criteria Decision Analysis and Optimization Approaches in Sustainable Waste-to-Energy Planning: A Systematic Review , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Muhammad N. IBRAHIM, Abubakar S. MOHAMMED, Iyanda M. ANIMASHAUN, Shehu ABDULKADIR, Sensor-Based Real-Time Soil Macronutrient Monitoring and Variable-Rate Fertilizer Application Machinery , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Mathew O. ADEOTI, Victor N. HARUNA, Omolayo M. IKUMAPAYI, Timothy A. ADEKANYE, Development and Characterization of Epoxy-Based Asbestos-Free Brake Pad Composites Reinforced with Cow Hoof Particulates , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Mohammed U. GARBA, Musa A. ABDULLAHI, Isah RABI, Saadatu A. GORO, Habibu UTHMAN, Abubakar S. MOHAMMED, Umaru AHMADU, Usman S. ONODUKU, Recovery of Lithium Carbonate from Nigerian Lepidolite Ore via Roasting-Leaching-Precipitation , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Oyeyemi T. AFOROLAGBA-BALOGUN, Olumide A. TOWOJU, Characterization of Fuel Produced from Nylon (Polyamide) and Polyethylene Terephthalate (PET) Wastes with Pyrolysis , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Ayodeji T. BALOGUN, Onoghwarite E. OHIMOR, Adegboyega L. ALUKO, Modelling and Performance Optimization of a Dual Fuel Mode Power Generation System (A Case Study of Allanblackia floribunda Seed Oil) , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Ahmad ADO, Abdullahi YAHAYA, Abubakar J. MUHAMMAD, Zaharaddeen G. SANI, Baba A. OLUWA, Abdulazeez A. YUSUF, Kinetic Study of 4-Nitrophenol Sonocatalytic Degradation , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Solomon A. ONAZI, Patrick U. OKORIE, Adamu S. ABUBAKAR, Ibrahim ABDULWAHAB, High-Fidelity Wake Modeling for Multi-Turbine Optimization in Complex Terrain: A Review , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
You may also start an advanced similarity search for this article.
