A Review on Solar Water Heating System in Nigeria
- Authors
-
-
Abdulyakin USMAN
Author
-
Ibrahim A. RUFAI
Author
-
Dalhatu B. YAHAYA
Author
-
- Keywords:
- Active, Passive, Prospects, Solar Energy, Solar Water Heater, Water Heating System.
- Abstract
-
The most widely used solar thermal technologies in West Africa are solar water heating systems; nevertheless, the adoption of these systems has been slower than expected. This review introduced the three technical methods upon which solar energy can be harnessed, and the solar water heating process falls under the thermal method. The working principle of the solar water heating system was explained to involve gathering heat in a solar collector; transfer the heat to the water supply; and store the heated water until it is used. Solar water heaters were then classified based on method of flow circulation and the type of solar collector. The components of the system for heat collection, heat storage, heat delivery and freeze protection were also introduced. Concept of Modelling and Simulation of solar Water Heating System as well as prospect of the system in family homes, clinics, and other settings reported from literature were included in the review. The review after highlighting the prospects of system however identified some areas that were not resolved in the existing literature to include: hybridizing solar water heater with incinerator water heater, optimizing the performance of the hybrid system using computational fluid dynamics techniques, as well as the sustainability evaluation for the deployment of the system in Clinics and other settings.
- References
- Downloads
- Published
- 01-09-2026
- Section
- Articles
- License
-
Copyright (c) 2026 Abdulyakin USMAN, Ibrahim A. RUFAI, Dalhatu B. YAHAYA (Author)

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Tunji J. ERINLE, Daniel C. UGURU-OKORIE, Abiodun M. ADEBIMPE, Adeolu A. ADEDIRAN, Hilary U. EZEA, A Comprehensive Review of In-Situ Monitoring and Post-Process Defect Detection in Additive Manufacturing , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Samuel E. CHUKWU, Martins Y. OTACHE, Precious O. ATEMOAGBO, Emmanuel O. AGBESE, Copula-Based Modelling of Drought Severity-Duration-Frequency Relationship of Sokoto-Rima-River Basin, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Mathew O. ADEOTI, Victor N. HARUNA, Omolayo M. IKUMAPAYI, Timothy A. ADEKANYE, Development and Characterization of Epoxy-Based Asbestos-Free Brake Pad Composites Reinforced with Cow Hoof Particulates , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Olarewaju T. OGINNI, An Overview of Unmanned Aerial Vehicles Technologies for Office Use and Services Delivery , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Hyelni G. MSHELIA, Abdulfatai JIMOH, Mohammed A. EVUTI, Abubakar A. IBRAHIM, Abdulwahab GIWA, Adeola G. OLUGBENGA, Potential of Onion Skin, Luffa cylindrica, and Corn Cob as Cellulose Sources: A Study of Their Proximate, Ultimate, and Morphological Properties , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- James AUDU, Abdulraman A. SALAWU, Muriana R. AREMU, Abdullahi A. ALHAJI, Lawal S. SIUS, Characterisation of Pumice-Kaolin Refractory Bricks for High Temperature Industrial Applications , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Usman HASSAN, An Assessment of Management Support Provided to Construction Equipment Operators Regarding Safety Practices and Protocols in Nigeria , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Cyril OCHERI, Victor S. AIGBODION, Esther O. AMEH, Ihebuchuwu C. EZEAKU, Chibuikem A. OKAFOR, Uchenna C. AMAZUE, Eddy R. OMONIGHO, Electrochemical Analysis of Azadirachta indica Leaves as a Corrosion inhibitor on Mild Steel in 1 M H2SO4 , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Oluwadare J. AKINDUGBAGBE, Adefope OWOJORI, Emmanuel AGBENYI, Babatunde ADEBO, Gamma Shielding Capabilities of Some Selected Materials Within Ibadan Metropolis , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Afeez A. AWOLOKUN, Olusegun O. ALUKO, Temitope F. AWOLUSI, Mayowa A. OGIDI, Performance Evaluation of Pervious Concrete Containing Glass Cullet and Glass Powder for Sustainable Construction , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
You may also start an advanced similarity search for this article.
