Examination of Electromagnetic Radiation Intensity of 5G Mobile Transceivers Based on Its Operational Techniques
- Authors
-
-
Johnson O. ADEOGO
Author
-
- Keywords:
- Electromagnetic Radiation, Intensity, Distance and Operational Techniques.
- Abstract
-
Electromagnetic Radiation (EMR) absorption is a major worrisome for both network users and providers. Due to the technological progression that produced 5G networks, the proliferation of antennas and the multiplication of mobile transceivers of different brands around us every day give portable/mobile network operators multiple access to EMR. Mobile transceivers’ operational techniques in energy radiation reduction are one of the key features to be examined in Fifth Generation (5G) systems to decrease the levels of Electromagnetic Radiation (EMR) around the users. In measuring electromagnetic radiation in terms of Power Density (PD) from mobile transmitters used, a Radio Frequency (RF) meter was employed, and the distance of 5 cm to 30 cm between the measuring equipment and the transmitters used with the help of a meter rule. During routing for connection, Itel gave the lowest radiation level of 0.3255mW/cm2 and the highest radiation level is from Apple iPhone 12, which is 0.4400mW/cm2. The results obtained were validated using the Excel package, and none of the transmitters used radiated above the international standard of non-ionising radiation level of 0.45 mW/cm2. This is important for the reduction of EMR levels to avoid excessive absorption of electromagnetic radiation.
- References
- Downloads
- Published
- 31-08-2026
- Section
- Articles
- License
-
Copyright (c) 2026 Johnson O. ADEOGO (Author)

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Habib I. ABDULAZEEZ, Bala ABDULLAHI, Abdullahi AHMED, Ibrahim A. TUKUR, Experimental Investigation of Solar Photovoltaic Tilt Angles for Maximum Energy Harvest in Kogi State, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Abimbola J. KOLAWOLE, AbdulKodri G. ABDULRAFIU, An Evaluation of the Challenges and Limitations in the Adoption of Technological Innovations at Nnamdi Azikiwe International Airport , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Dandison M. WALI, Beabu B. DUMKHANA, Raymond A. EKEMUBE, Silas O. NKAKINI, Smart Assessment of Tractor Noise Levels During Tillage Operation , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Opeyemi O. ASAOLU, Oluwasanmi S. ADANIGBO, Temidayo J. AKINDAHUNSI, Advances in Privacy Preservation Techniques for Mobile Ad Hoc Networks: A Review , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Olarewaju T. OGINNI, An Overview of Unmanned Aerial Vehicles Technologies for Office Use and Services Delivery , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Abubakar LAWAL, Abdulkadir O. ABDULBAKI, Nathaniel SALAWU, Bala A. SALIHU, Mamman A. THOMAS, Abraham U. USMAN, Sub-6 GHz Millimeter-Wave Metamaterial Antenna with Reconfigurable Radiation Patterns for Enhanced Wireless Communication , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Bala ABDULLAHI, Bala G. ABDURRAHMAN, Yusuf ALHASAN, Saidu B. ABUBAKAR, Bashir I. KUNYA, Raya K. ALDADAH, Saad MAHMOUD, Ahmed REZK, Effects of Truncating the Height of Compound Parabolic Collector on its Geometry, Optical and Thermal Performances , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Ruth R. ADELAJA, Rhoda I. ADELAJA, Henry OTOBRISE, Adefope OWOJORI, Babatunde ADEBO, Investigation of Indoor Radiation Levels within Lead City University’s Academic Buildings , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Israel A. OLUWAFEMI, Akaninyene B. OBOT, Emmanuel UBOM, Ayodele A. OLATUNJI, Mbuotidem G. ROBINSON, Design and Analysis of a Dual-Band Circular Microstrip Antenna Using Spatially Distributed CSRRs , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Tunji J. ERINLE, Daniel C. UGURU-OKORIE, Abiodun M. ADEBIMPE, Adeolu A. ADEDIRAN, Hilary U. EZEA, A Comprehensive Review of In-Situ Monitoring and Post-Process Defect Detection in Additive Manufacturing , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
You may also start an advanced similarity search for this article.
Most read articles by the same author(s)
- Johnson O. ADEOGO, Olawale J. OLALUYI, Olumuyiwa A. OJO, Abayomi T. AYODELE, Elijah A. OLAJUYIN, Fasasi BELLO, Paul C. OFODU, Performance Evaluation of 3.5 kVA Hybrid Inverter Following Standard Engineering Practices and Safety Procedures , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
