Model Selection for Path Loss Prediction of Ultra High Frequency Terrestrial Television
- Authors
-
-
Ayodele S. OLUWOLE
Author
-
Olumayowa A. OJO
Author
-
Olaitan AKINSANMI
Author
-
- Keywords:
- Model selection, path loss prediction, supervised machine learning, Random-forest, performance metrics.
- Abstract
-
Precise prediction of path loss is crucial for the reliable operation and optimal coverage of terrestrial Ultra High Frequency (UHF) television networks. Traditional models tend to have limited accuracy in complex propagation environments due to the fixed parameter assumptions and the lack of consideration of the nonlinear interactions among terrain, vegetation and antenna characteristics. This paper investigates the applicability of different machine learning models for the prediction of path loss in terrestrial UHF television networks. Received signal strength was first measured in the field at selected locations along five different routes in Ekiti State, Nigeria. The measured dataset was subsequently preprocessed and prepared for machine learning analysis. Five supervised machine learning algorithms were implemented and trained on the dataset, such as Linear Regression, K-Nearest Neighbors Regression, Random Forest Regression, Decision Tree Regression and Extra Tree Regression. Lastly, , the performance of the models was assessed using root mean square error (RMSE), mean absolute error (MAE), and coefficient of determination (R2). The results showed that KNN Regression had the lowest MAE (1.721), MSE (4.667) and RMSE (2.160) with an accuracy of 94.80%. Random Forest Regression was next with a slightly higher MAE (1.733), MSE (6.775) and RMSE (2.603), but scored the highest accuracy (94.89%) as a balanced and reliable performance overall. The results validate random forest as optimal and reliable path loss prediction model in UHF terrestrial broadcast networks. Carefully selection of machine learning models helps achieve precise estimation of path loss.
- References
- Downloads
- Published
- 21-08-2026
- Section
- Articles
- License
-
Copyright (c) 2026 Ayodele S. OLUWOLE, Olumayowa A. OJO, Olaitan AKINSANMI (Author)

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Bala ABDULLAHI, Bala G. ABDURRAHMAN, Yusuf ALHASAN, Saidu B. ABUBAKAR, Bashir I. KUNYA, Raya K. ALDADAH, Saad MAHMOUD, Ahmed REZK, Effects of Truncating the Height of Compound Parabolic Collector on its Geometry, Optical and Thermal Performances , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Abdulrahman B. GAMBO, Carbon Capture and Mechanical Design of Membrane Reactors: A Systematic Review and Design-Performance Framework for Sustainable Energy Systems , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Zaharaddeen MUSA, Aliyu BELLO, Haris A. DANLADI, Design and Construction of Dual Input Mobile Solar Generator for Reliable Off-Grid Power , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Onyeka E. NNANYELUGO, Peter O. OFFOR, Cyril OCHERI, Camillus S. OBAYI, Optical and Structural Properties of Er/Sr Co-Doped αMnS Films Prepared by Chemical Spray Pyrolysis , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Abubakar D. ADO, Aminu D. MAHMUD, Jamilu HARUNA, Sadiq S. DODO, Abdullahi YAHAYA, Development of Enhanced Coal Briquettes for Domestic Cooking Applications in Nigeria , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Lukman MOHAMMED, Victor O. WAZIRI, Ismaila IDRIS, Suleiman AHMAD, Performance Assessment of Android Antimalware Applications: An Experimental Approach , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Joseph O. AJAYI, Adekunle T. ADENIYI, Mufliah G. OMOFOYEWA, Abel A. ADEYI, Abdulwahab GIWA, Evaluation on the Rheological Properties of Water-Based Drilling Mud: A Case Study of Ire-Ekiti Clay , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Bala I. ABDULKARIM, Yusuf M. BABA, Suleiman I. ENEHE, Kamoru A. SALAM, Umar IDRISS, Synthesis of Activated Carbon from Corncob for the removal of Lead (Pb²⁺) ions from Aqueous solution using a packed bed Adsorption Column , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Kamardeen A. OGUNBAJO, Benjamin I. UGHEOKE, Ibrahim D. MUHAMMAD, Emmanuel ONCHE, Application of Upper Bound Analysis and Taguchi Method in Aluminium Extrusion , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Sulaiman Y. ADAMU, Fadimatu N. DABAI, Abdulazeez Y. ATTA, Baba Y. JIBRIL, Preparation and Characterization of Enhanced Hierarchical Zn-Ni/HZSM-5 Catalysts for Potential use in Catalytic reactions to Upgrade Bio-Oil and Hydrogen from Biomass Pyrolysis , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
You may also start an advanced similarity search for this article.
