Assessment of Occupational Health Hazards Among Oil Refinery Workers at Kaduna Refining and Petrochemical Company
- Authors
-
-
Raji ABDULRASAK
Author
-
Abdulaziz S. ALIYU
Author
-
- Keywords:
- Occupational health, industrial accidents, refinery workers, workplace safety, KRPC.
- Abstract
-
Occupational health and safety are vital in the petroleum refining industry due to various hazards faced by workers. A study at Kaduna Refining and Petrochemical Company (KRPC) evaluated industrial accidents and preventive measures using a survey of 250 employees. A cross-sectional survey design was adopted, while primary data were utilized. Structured questionnaires were administered to 250 employees selected from a population of 1,696 workers using the Yamane sampling formula and simple random sampling technique, frequency and percentage was used for the demographic items while mean and standard deviation with remarks was used for the research questions. Findings indicated a relatively low perception of industrial hazards (mean score 2.21), although work-related deaths raised significant concern (mean score 3.06). Positive acknowledgment was given to safety measures like personal protective equipment and hazard management systems (mean score 3.96). Based on these survey results, the study concludes that KRPC staff perceive several safety measures in place but recommends further investigation using objective environmental monitoring and enforcement/audit records to verify exposure and compliance.
- References
- Downloads
- Published
- 17-08-2026
- Section
- Articles
- License
-
Copyright (c) 2026 Raji ABDULRASAK, Abdulaziz S. ALIYU (Author)

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Murtala NAMAKKA, Abdulhamid S. ILIYASU, Utilisation of Supercritical Critical Fluids in Adsorption Process: A Comprehensive Review , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Sani MAMOUDOU, Abdulmumin A. SHUAIBU, Aliyu USMAN, Evaluation of Nano-Hydroxyapatite/Nano-Kaolin Composite Additives on the Physical Properties of Hot Mix Asphalt Binder , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Ojochide P. DAMIAN, Fadimatu N. DABAI, Abdulwasiu ABDURRAHMAN, Kamiludeen OLANREWAJU, Bilyamin ABDULMUMIN, Grace A. OLUGBENGA, A Simulation-Driven Strategy for Improved Expandable Polystyrene Synthesis via Multi-Stage Initiator Dosing , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- James AUDU, Abdulraman A. SALAWU, Muriana R. AREMU, Abdullahi A. ALHAJI, Lawal S. SIUS, Characterisation of Pumice-Kaolin Refractory Bricks for High Temperature Industrial Applications , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Christopher C. NWAOGU, Nnamdi AHUCHAOGU, Reducing Electromagnetic Radiation Around the Fourth Generation Base Stations , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Benedict O. EDENSETING, Innocent O. OBOH, Alexander A. JOCK, Effective Food Waste Utilization: A Veritable Source of Biofuel for Nigerian Economic Sustenance and Development - A Review , FUDMA Journal of Engineering and Technology: Vol. 1 No. 1 (2025): July 2025
- Suleiman ZUBAIR, Hassan T. ABDULAZEEZ, Bala A. SALIHU, Gambo MOHAMMED, A Low-Cost, Offline-Capable Wireless Soil Moisture Monitoring System for Smallholder Farmers: Design, Validation, and Agronomic Impact , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Oguntola J. ALAMU, Peter O. ILORI, Seun OYELAMI, Wasiu O. ADEDEJI, Tunji J. ADEPOJU, Abideen T. OYEWO, A Review of the Effect of Post-Processing Heat Treatment on 3D Printed Metal Parts , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Oluwaseun S. OGUNGBEMI, Aquifer Characterisation and Vulnerability Assessment in a Typical Basement Complex Terrain , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Abdulkareem BELLO, Yusuf O. ADEIZA, Saleh S. LUKMAN, Muhammad A. ADAMU, Chibuzor A. OKAFOR, Abdulaziz A. ABDULSALAM, Production of Silica from ABU Zaria Dam Sand as an Eco-Friendly Corrosion Inhibitor Using Nanotechnology , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
You may also start an advanced similarity search for this article.
