Development of Enhanced Coal Briquettes for Domestic Cooking Applications in Nigeria
- Authors
-
-
Abubakar D. ADO
Author
-
Aminu D. MAHMUD
Author
-
Jamilu HARUNA
Author
-
Sadiq S. DODO
Author
-
Abdullahi YAHAYA
Author
-
- Keywords:
- Coal briquettes, calcium hydroxide, domestic cooking, combustion performance, Nigeria.
- Abstract
-
This study investigates the development of enhanced coal briquettes for domestic cooking applications in Nigeria, targeting a cleaner and affordable alternative to firewood and charcoal. Coal fines were briquetted with starch as a binder and calcium hydroxide [Ca(OH)₂] as an additive in graded proportions, yielding five formulations (F1–F5) with Ca(OH)₂ content varying from 5% to 25% at a constant 5 g of starch. The formulations were evaluated for ignition time, burning duration, ash content, and calorific value using standard laboratory procedures. A techno-economic assessment was conducted to benchmark production costs against prevalent household fuels. Results indicate that increasing Ca(OH)₂ content progressively delayed ignition (10–32 s), extended burning duration (19–45 min), and raised ash content (10–22%). Formulation F4 (20% Ca(OH)₂) provided the most balanced performance: acceptable ignition time (~25 s), extended burning duration (~38 min), moderate ash content (~13%), and calorific value of 28 MJ/kg. Estimated raw-material costs (~₦325/kg) are competitive with charcoal and kerosene. These findings indicate that enhanced coal briquettes can serve as a pragmatic transition fuel for low-income and rural Nigerian households where access to LPG is limited.
- References
- Downloads
- Published
- 17-08-2026
- Section
- Articles
- License
-
Copyright (c) 2026 Abubakar D. ADO, Aminu D. MAHMUD, Jamilu HARUNA, Sadiq S. DODO, Abdullahi YAHAYA (Author)

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Caleb A. ABORISADE, Jide E.T. AKINSOLA, Ifeoluwa M. OLANIYI, Fathia O. ONIPEDE, Emmanuel A. OLAJUBU, Ganiyu A. ADEROUNMU, Machine Learning-Based Polycystic Ovary Syndrome Generative Modelling via Ensemble Learning and Neural Networks for Infertility Prediction , FUDMA Journal of Engineering and Technology: Vol. 1 No. 1 (2025): July 2025
- Shamsuddeen J. AHMAD, Saifullahi S. SADI, Muhammad M. AHMAD, Abdullahi D. UMAR, Shamsuddeen USMAN, Comparative Analysis of Machine Learning Algorithms for the Detection and Classification of Suspicious Emails , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Jafaru A. MOHAMMED, Thomas N. GUMA, Malachy SUMAILA, Mahdi MAKWAYO, A Review of Local Manufacturing of Borehole Windmill Gear Trains Using Reverse Engineering and Integrated Braking Systems , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Samuel E. CHUKWU, Martins Y. OTACHE, Precious O. ATEMOAGBO, Emmanuel O. AGBESE, Copula-Based Modelling of Drought Severity-Duration-Frequency Relationship of Sokoto-Rima-River Basin, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Oluyemi S. ONIFADE, Olusegun O. AJIDE, Development and Performance Evaluation of a Semi-Automated Impact Fracture Tester , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Johnson O. ADEOGO, Olawale J. OLALUYI, Olumuyiwa A. OJO, Abayomi T. AYODELE, Elijah A. OLAJUYIN, Fasasi BELLO, Paul C. OFODU, Performance Evaluation of 3.5 kVA Hybrid Inverter Following Standard Engineering Practices and Safety Procedures , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Zachariah S. PYENDANG, Felix ACHEMA, Isheni YAKUBU, Solomon E. APEH, Microstructural Characterization of Fibre Reinforced Polymer (FRP) Composite (Kenaf Fibre and Polyester Resin) for Structural Applications , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Usman GARBA, Abdullahi ADAMU, Mamuda MUHAMMAD, Physicochemical Characterisation of Mineral Sands from Northwestern Nigeria for Industrial Applications , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Victor A. NSABA, Sabiu B. YUSUF, Kafayat A. IBRAHIM, Consumer Perceptions of Artificial Intelligence (AI)-Driven Smart Grids and Energy Efficiency in Northwest Nigeria’s Power Distribution Sector: A Multi-State Case Study of Sokoto, Kebbi, and Zamfara , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Adefemi O. ADEODU, Banjo C. ADEDOKUN, Amos A. ADEGBITE, Development and Performance Evaluation of an Injection Moulding Machine for Recycled Polymer Composite Production , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
You may also start an advanced similarity search for this article.
Most read articles by the same author(s)
- Abdullahi YAHAYA, Ahmad ADO, Jaju A. MUHAMMAD, Zaharaddeen G. SANI, Baba A. OLUWA, Abdulazeez A. YUSUF, Kinetic Modelling of Sonocatalytic Phenol Degradation over Alumina-Supported Copper Oxide Catalyst , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
