Development of Enhanced Coal Briquettes for Domestic Cooking Applications in Nigeria
- Authors
-
-
Abubakar D. ADO
Author
-
Aminu D. MAHMUD
Author
-
Jamilu HARUNA
Author
-
Sadiq S. DODO
Author
-
Abdullahi YAHAYA
Author
-
- Keywords:
- Coal briquettes, calcium hydroxide, domestic cooking, combustion performance, Nigeria.
- Abstract
-
This study investigates the development of enhanced coal briquettes for domestic cooking applications in Nigeria, targeting a cleaner and affordable alternative to firewood and charcoal. Coal fines were briquetted with starch as a binder and calcium hydroxide [Ca(OH)₂] as an additive in graded proportions, yielding five formulations (F1–F5) with Ca(OH)₂ content varying from 5% to 25% at a constant 5 g of starch. The formulations were evaluated for ignition time, burning duration, ash content, and calorific value using standard laboratory procedures. A techno-economic assessment was conducted to benchmark production costs against prevalent household fuels. Results indicate that increasing Ca(OH)₂ content progressively delayed ignition (10–32 s), extended burning duration (19–45 min), and raised ash content (10–22%). Formulation F4 (20% Ca(OH)₂) provided the most balanced performance: acceptable ignition time (~25 s), extended burning duration (~38 min), moderate ash content (~13%), and calorific value of 28 MJ/kg. Estimated raw-material costs (~₦325/kg) are competitive with charcoal and kerosene. These findings indicate that enhanced coal briquettes can serve as a pragmatic transition fuel for low-income and rural Nigerian households where access to LPG is limited.
- References
- Downloads
- Published
- 17-08-2026
- Section
- Articles
- License
-
Copyright (c) 2026 Abubakar D. ADO, Aminu D. MAHMUD, Jamilu HARUNA, Sadiq S. DODO, Abdullahi YAHAYA (Author)

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Abba M. BALA, Abdurrauf G. SHARIFAI, Umar S. HARUNA, A Hybrid Deep Learning Model for Efficient Anomaly Detection in Video Surveillance Systems , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Abdullahi YAHAYA, Ahmad ADO, Jaju A. MUHAMMAD, Zaharaddeen G. SANI, Baba A. OLUWA, Abdulazeez A. YUSUF, Kinetic Modelling of Sonocatalytic Phenol Degradation over Alumina-Supported Copper Oxide Catalyst , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Musibaudeen O. IDRIS, Busayo S. ADEBOYE, Rasheedah A. AYOOLA, Abiodun G. ABIOYE, Abideen T. OYEWO, An Artificial Neural Network-Based Quality Control Framework for Nigerian Manufacturing Industries , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Oguntola J. ALAMU, Peter O. ILORI, Seun OYELAMI, Wasiu O. ADEDEJI, Tunji J. ADEPOJU, Abideen T. OYEWO, A Review of the Effect of Post-Processing Heat Treatment on 3D Printed Metal Parts , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Oluwadare J. AKINDUGBAGBE, Adefope OWOJORI, Emmanuel AGBENYI, Babatunde ADEBO, Gamma Shielding Capabilities of Some Selected Materials Within Ibadan Metropolis , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Oluwadare A. ADEBISI, Ibiyemi I. ADEAGA, Samson O. AYANLADE, Khadijah O. LAWAL, DSAF-Net: A Dynamic Scale-Aware Attention Fusion Network for Multiclass Brain Tumour Classification from MRI Images , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Tolulope S. FAWALE, Monday O. IMAFIDON, Chukwuemeka P. OGBU, Adoption of Non-Financial Motivational Strategies for Enhancing Productivity on Construction Sites in Edo State, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Mohammed A. GANA, Zaka A. MSHELIA, Isuwa S. AJI, Alhaji GUJJA, Lawan A.M. KOLO, Investigation and Comparative Analysis of Natural Moulding Sands from Five Deposits in Maiduguri, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Francis O. BOROKINNI, Olarewaju T. OGINNI, Ridwan O. RAJI, Kolawole ALONGE, Effects of Quenching Media and Heat Transfer Rate on the Hardness and Microstructure of Low-Carbon Steel , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Folakemi B. OYEYEMI, Usman A. ABDURRAHMAN, Detecting and Mitigating Cybersecurity Threats in Nigerian Commercial Banks Using Machine Learning: A Case Study of Selected Institutions , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
You may also start an advanced similarity search for this article.
Most read articles by the same author(s)
- Abdullahi YAHAYA, Ahmad ADO, Jaju A. MUHAMMAD, Zaharaddeen G. SANI, Baba A. OLUWA, Abdulazeez A. YUSUF, Kinetic Modelling of Sonocatalytic Phenol Degradation over Alumina-Supported Copper Oxide Catalyst , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
