Development of Enhanced Coal Briquettes for Domestic Cooking Applications in Nigeria
- Authors
-
-
Abubakar D. ADO
Author
-
Aminu D. MAHMUD
Author
-
Jamilu HARUNA
Author
-
Sadiq S. DODO
Author
-
Abdullahi YAHAYA
Author
-
- Keywords:
- Coal briquettes, calcium hydroxide, domestic cooking, combustion performance, Nigeria.
- Abstract
-
This study investigates the development of enhanced coal briquettes for domestic cooking applications in Nigeria, targeting a cleaner and affordable alternative to firewood and charcoal. Coal fines were briquetted with starch as a binder and calcium hydroxide [Ca(OH)₂] as an additive in graded proportions, yielding five formulations (F1–F5) with Ca(OH)₂ content varying from 5% to 25% at a constant 5 g of starch. The formulations were evaluated for ignition time, burning duration, ash content, and calorific value using standard laboratory procedures. A techno-economic assessment was conducted to benchmark production costs against prevalent household fuels. Results indicate that increasing Ca(OH)₂ content progressively delayed ignition (10–32 s), extended burning duration (19–45 min), and raised ash content (10–22%). Formulation F4 (20% Ca(OH)₂) provided the most balanced performance: acceptable ignition time (~25 s), extended burning duration (~38 min), moderate ash content (~13%), and calorific value of 28 MJ/kg. Estimated raw-material costs (~₦325/kg) are competitive with charcoal and kerosene. These findings indicate that enhanced coal briquettes can serve as a pragmatic transition fuel for low-income and rural Nigerian households where access to LPG is limited.
- References
- Downloads
- Published
- 17-08-2026
- Section
- Articles
- License
-
Copyright (c) 2026 Abubakar D. ADO, Aminu D. MAHMUD, Jamilu HARUNA, Sadiq S. DODO, Abdullahi YAHAYA (Author)

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Opeyemi A. ASAJU, Cephas ADELORE, Akintunde O. ONAMADE, Jonathan B. ADEWUMI, Glory A. ODUBANJO, Gbenga O. WILLIAMS, Enoch O. OYELEYE, Assessing Thermal Comfort and its Impact on Student Satisfaction in Selected Hostels at Caleb University, Imota, Lagos State , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Mathew O. ADEOTI, Victor N. HARUNA, Omolayo M. IKUMAPAYI, Timothy A. ADEKANYE, Development and Characterization of Epoxy-Based Asbestos-Free Brake Pad Composites Reinforced with Cow Hoof Particulates , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Yusuf M. YAHAYA, Factors Contributing to the Erosion of Freehand Sketching Competence in Technology Education: A Case Study of Bayero University, Kano , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Vincent B. ONIGBARA, Sunday I. AGU, Muftau A. GBENLE, Metal-Based Biomaterials for Clinical Implant Applications: Materials and Performance – A Review , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Ayodele DANIEL, Mercy O. AKEJU, Sunday O. ISEHUNWA, Abel A. ADEYI, Adebayo T. OGUNYEMI, Decline Curve Analysis of Continuous Injection Gas Lifted Wells , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Yusuf T. BAFFA, Muhammad Y. MUHAMMAD, Aliyu SHUAIBU, Enhanced Detection and Classification Models for Distributed Denial-of-Service Using Time-Based Features in Cybersecurity , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Sirajo ALHASSAN, Abdullahi A. ADAMU, Mohammed T. JIMOH, Multi-Criteria Decision Analysis and Optimization Approaches in Sustainable Waste-to-Energy Planning: A Systematic Review , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Ibrahim M. GANA, Abdullahi YUSUF, Agidi GBABO, Micheal EPHRAIM, Abubakar M. HASSAN, Development and Testing of an Automated Solar-Powered Nutrient Film Technique (NFT) Hydroponic Planting System , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Hafsah A. ABDULRAHMAN, Muhammad M. HAMIDU, Techno-Economic Optimization of a Hybrid PV-Wind-Waste-to Energy System for the University of Maiduguri , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Bolaji A. OMODUNBI, Hammed A. OLASUNKANMI, Development of an Ensemble Model for Email Filtering and Classification , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
You may also start an advanced similarity search for this article.
Most read articles by the same author(s)
- Abdullahi YAHAYA, Ahmad ADO, Jaju A. MUHAMMAD, Zaharaddeen G. SANI, Baba A. OLUWA, Abdulazeez A. YUSUF, Kinetic Modelling of Sonocatalytic Phenol Degradation over Alumina-Supported Copper Oxide Catalyst , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
