TextCNN and Gated Recurrent Unit(GRU) with Additive Attention for Character-Level Yoruba Spell Correction
- Authors
-
-
Opeyemi O. ASAOLU
Author
-
Tomilayo F. ADEBIYI
Author
-
Kazeem M. OLAGUNJU
Author
-
- Keywords:
- Yoruba Language; Orthographic Error Correction; TextCNN; GRU; Additive Attention.
- Abstract
-
This Automatic spell correction for Yoruba, a tonal Niger-Congo language spoken by more than 40 million people, remains an open problem in low-resource natural language processing. This paper evaluates two deep learning architectures, a pure convolutional TextCNN and a Bidirectional GRU with additive attention (GRU+Attn) for character-level Yoruba orthographic error correction. Both models were trained on a 1,244,871-token corpus drawn from four open-access repositories: Masakhane NER, AfriSenti, MasakhaPOS, and MasakhaNEWS. A balanced dataset of 127,905 correction pairs was constructed by injecting five Yoruba-specific error types into a 1,000-word vocabulary. TextCNN reached 83.9% test accuracy in 1.82 minutes of Graphics Processing Unit (GPU) training. GRU+Attn reached 83.6% in 2.49 minutes. Both architectures corrected character insertion errors above 93% accuracy. Tone mark omission was the hardest category for both, peaking at 77.3% (TextCNN), a result consistent with the information-theoretic difficulty of resolving homographs without sentential context. These results extend the existing Yoruba benchmark and establish TextCNN as a deployment-practical alternative to stacked recurrent models.
- References
- Downloads
- Published
- 15-08-2026
- Section
- Articles
- License
-
Copyright (c) 2026 Opeyemi O. ASAOLU, Tomilayo F. ADEBIYI, Kazeem M. OLAGUNJU (Author)

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Daniel N. MBACHIRIN, David E. ABEL, Paul A. OMALE, Precision Agriculture Technologies for Smallholder Farming Systems in Developing Countries: A Scoping Review of Opportunities, Limitations and Future Directions , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Olalekan OGUNBIYI, Lambe M. ADESINA, Ibrahim Z. ARIYO, Development of an IoT-Based Smart Distribution Transformer Monitoring System for Reliable Rural Electrification , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Ferguson H. TOBINS, Ishiaka S. ARUDI, Abdulhakeem H. NURUDEEN, Snail Shell-Clay Ceramic Composites as Sustainable Raw Materials for High-Voltage Insulators , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Kamardeen A. OGUNBAJO, Benjamin I. UGHEOKE, Ibrahim D. MUHAMMAD, Emmanuel ONCHE, Application of Upper Bound Analysis and Taguchi Method in Aluminium Extrusion , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Fatima A. MUSA, Abdulmajid B. UMAR, Abba M. BALA, A Hybrid CNN–BiGRU Model with Grey Wolf Optimization and LightGBM for Stock Price Prediction , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Abubakar M. ALI, Haruna IBRAHIM, Ephraim G. KEFAS, Thermal Plasma Gasification of Municipal Solid Waste: Principles, Technological Advances, Challenges, and Future Prospects , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Bala I. ABDULKARIM, Phebe O. JAMES, Utilization of Microbial Fuel Cells for Electricity Generation from Gwagwalada Abattoir Wastewater , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Tina I. FRANCIS-AKILAKI, Onimi O. ASHAMA, Raymond A. EKEMUBE, Vibration Analysis as a Transformative Approach to Condition-Based Monitoring , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Olarewaju T. OGINNI, An Overview of Unmanned Aerial Vehicles Technologies for Office Use and Services Delivery , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Ojo I. ENOCK, Ibrahim A. SAIDU, Ibrahim SULAIMAN, Oluwafeyisikemi. Y. ENOC, Design and Development of a Melon Shelling Machine , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
You may also start an advanced similarity search for this article.
