TextCNN and Gated Recurrent Unit(GRU) with Additive Attention for Character-Level Yoruba Spell Correction
- Authors
-
-
Opeyemi O. ASAOLU
Author
-
Tomilayo F. ADEBIYI
Author
-
Kazeem M. OLAGUNJU
Author
-
- Keywords:
- Yoruba Language; Orthographic Error Correction; TextCNN; GRU; Additive Attention.
- Abstract
-
This Automatic spell correction for Yoruba, a tonal Niger-Congo language spoken by more than 40 million people, remains an open problem in low-resource natural language processing. This paper evaluates two deep learning architectures, a pure convolutional TextCNN and a Bidirectional GRU with additive attention (GRU+Attn) for character-level Yoruba orthographic error correction. Both models were trained on a 1,244,871-token corpus drawn from four open-access repositories: Masakhane NER, AfriSenti, MasakhaPOS, and MasakhaNEWS. A balanced dataset of 127,905 correction pairs was constructed by injecting five Yoruba-specific error types into a 1,000-word vocabulary. TextCNN reached 83.9% test accuracy in 1.82 minutes of Graphics Processing Unit (GPU) training. GRU+Attn reached 83.6% in 2.49 minutes. Both architectures corrected character insertion errors above 93% accuracy. Tone mark omission was the hardest category for both, peaking at 77.3% (TextCNN), a result consistent with the information-theoretic difficulty of resolving homographs without sentential context. These results extend the existing Yoruba benchmark and establish TextCNN as a deployment-practical alternative to stacked recurrent models.
- References
- Downloads
- Published
- 15-08-2026
- Section
- Articles
- License
-
Copyright (c) 2026 Opeyemi O. ASAOLU, Tomilayo F. ADEBIYI, Kazeem M. OLAGUNJU (Author)

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Johnson O. ADEOGO, Examination of Electromagnetic Radiation Intensity of 5G Mobile Transceivers Based on Its Operational Techniques , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Raji ABDULRASAK, Abdulaziz S. ALIYU, Assessment of Occupational Health Hazards Among Oil Refinery Workers at Kaduna Refining and Petrochemical Company , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Abdullahi P. NUHU, Kabir O. YUSUF, Aliyu O. ABDULRAHMAN, Kehinde A. LASISI, Effect of Heat Treatment on Post Weld Railway Track , FUDMA Journal of Engineering and Technology: Vol. 1 No. 1 (2025): July 2025
- Bala ABDULLAHI, Bala G. ABDURRAHMAN, Yusuf ALHASAN, Saidu B. ABUBAKAR, Bashir I. KUNYA, Raya K. ALDADAH, Saad MAHMOUD, Ahmed REZK, Effects of Truncating the Height of Compound Parabolic Collector on its Geometry, Optical and Thermal Performances , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Ayodele S. OLUWOLE, Olumayowa A. OJO, Olaitan AKINSANMI, Model Selection for Path Loss Prediction of Ultra High Frequency Terrestrial Television , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Ukange N. SYBIL, Hadiza A. UMAR, Ogar M. OKO, Habeebah A. KAKUDI, Usman MAHMUD, Alex AARON, Leveraging Quantum Machine Learning for Early Ovarian Cancer Diagnosis , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Oluwayinka. G. AKINWAMIDE, Olugbenga O. AMU, Christopher FAPOHUNDA, Prediction of International Roughness Index of Flexible Pavement Using Machine Learning-Based Predictive Framework in Ekiti State , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Olusiji A. ADEYANJU, Joseph O. OLAIDE, Machine Learning Models for Predicting Flow Rate for Niger Delta Oil Wells , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Muhammad M. HAMIDU, Development of MATLAB-Based Model for Solar Radiation Prediction and Photovoltaic Panel Tilt Optimization Angle for Maiduguri Region, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Osagie I. IHENYEN, Raymond A. EKEMUBE, Development of an Agro-Waste Diesel Engine Powered Shredding Machine , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
You may also start an advanced similarity search for this article.
