Improvement of Power Efficiency of Sensor Network Using Ant Colony Optimization and K-Means Clustering Technique
- Authors
-
-
Nsikan L. AKPAN
Author
-
Akaniyene OBOT
Author
-
Olusegun A. AFOLABI
Author
-
- Keywords:
- Ant colony optimization, clustering, energy efficiency, K-means, multi-objective optimization, routing, wireless sensor networks.
- Abstract
-
Energy-constrained routing remains a central limitation in wireless sensor networks (WSNs), because repeated transmission, poor cluster-head selection, and unreliable paths accelerate battery depletion and fragment sensing coverage. This paper presents a K-means-guided adaptive multi-objective ant colony optimization (KMA-MOACO) framework that combines logical node clustering, residual-energy-based cluster-head rotation, multi-pheromone route construction, and Pareto-dominance-based selection. The routing problem is formulated to minimize communication energy and end-to-end delay while maximizing packet-delivery reliability, subject to node-energy, transmission-range, link-quality, and delay constraints. A first-order radio model is used in a 100 m × 100 m simulation field with 50–150 stationary nodes; the reported comparative case contains 100 nodes initialized with 2 J, periodic 64-byte packets, and 10–30 ants per routing round. KMA-MOACO is evaluated against a conventional ACO routing scheme and a generic multi-objective ACO implementation. In the reported representative case, KMA-MOACO reduced average energy consumption to 0.5676 J and average end-to-end delay to 0.3585 s, corresponding to approximately 75% reductions relative to both comparators. It achieved a packet-delivery ratio and normalized throughput of 0.92, full node reachability, an energy-delay product of 0.2035, and an energy-reliability product of 0.6170. The generic multi-objective ACO retained the longest raw network lifetime and the largest hypervolume, whereas the proposed method provided the strongest overall compromise between energy, latency, connectivity, and reliability. The findings support adaptive clustering and Pareto-guided pheromone control as a practical direction for resource-constrained WSNs, while also identifying the need for repeated-seed statistical validation and hardware-in-the-loop assessment.
- References
- Downloads
- Published
- 14-08-2026
- Section
- Articles
- License
-
Copyright (c) 2026 Nsikan L. AKPAN, Akaniyene OBOT, Olusegun A. AFOLABI (Author)

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Benjamin BELLO, Jibril D. JIYA, Aje TOKAN, Ahmed MOHAMMED, Classification of Groundnut Pod Varieties using Histogram-Based Gradient Booster Classifier (HGBC) with Machine Learning Techniques , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Francis O. BOROKINNI, Olarewaju T. OGINNI, Ridwan O. RAJI, Kolawole ALONGE, Effects of Quenching Media and Heat Transfer Rate on the Hardness and Microstructure of Low-Carbon Steel , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Ndagi MAMUDU, Ibrahim S. MOHAMMED, Mohammed ALIYU, Peter DANIEL, Timothy Y. AKANDE, Bala A. GARBA, Development and Performance Evaluation of Biomass Pyrolysis System for Biofuel Production , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Auwalu M. ABDULLAHI, Musa M. BELLO, Ado HARUNA, Amina I. KHALEEL, Lubabatu B. ILA, Abdurrahaman M. BELLO, Adaptive Hybrid Compliant Control of a Desktop Upper-Limb Rehabilitation Robot , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Abdulyakin USMAN, Ibrahim A. RUFAI, Dalhatu B. YAHAYA, A Review on Solar Water Heating System in Nigeria , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Yetunde M. ALADEITAN, Damilola V. ABRAHAM, A Data-Driven Surrogate Framework for Economic Optimization of Thin Oil Rim Developments: A Comprehensive Methodological Review and Niger Delta Application , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Yusuf L. SHUAIB-BABATA, Kabiru S. AJAO, Yusuf O. BUSARI, Ibrahim O. AMBALI, Toheeb A. NURUDEEN, John A. OKOLO, Gabriel A. LONGE, Inhibitory Potential of Blended Parkia biglobosa and Delonix regia Extracts on Corrosion of AISI 1007 Steel in 1.0 M Hydrochloric Acid Medium , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Tunji J. ERINLE, Daniel C. UGURU-OKORIE, Abiodun M. ADEBIMPE, Adeolu A. ADEDIRAN, Hilary U. EZEA, A Comprehensive Review of In-Situ Monitoring and Post-Process Defect Detection in Additive Manufacturing , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Abimbola J. KOLAWOLE, AbdulKodri G. ABDULRAFIU, An Evaluation of the Challenges and Limitations in the Adoption of Technological Innovations at Nnamdi Azikiwe International Airport , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Aminu D. MAHMUD, Imran N. IBRAHIM, Development and Optimization of Starch-Based Bioplastics from Millet and Cassava Using Mixture Design Approach , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
You may also start an advanced similarity search for this article.
