Integration of Green Technologies for Sustainable Facility Management of Public Buildings in Edo State, Nigeria
- Authors
-
-
Ayobami O. IDOWU
Author
-
- Keywords:
- Edo State, facility management, green technology, public buildings, sustainable construction.
- Abstract
-
The increasing demand for sustainable infrastructure has intensified the need to integrate green technologies into facility management practices. These facilities consume substantial energy and resources, making them critical targets for sustainability-driven interventions. This study examines the integration of green technologies as a strategy for enhancing sustainable facility management, focusing on improving energy efficiency, minimizing environmental impact, and optimizing operational performance. The study adopts a quantitative research approach using a structured questionnaire survey administered to facility managers, engineers, quantity surveyors and architects involved in public building projects. A simple random sampling technique was employed to select respondents from a total population of 207 professionals, ensuring that each member had an equal chance of participation. Data collected were analyzed using descriptive statistics and inferential methods, including mean score ranking and regression analysis, to identify key green technologies adopted and evaluate their impact on facility management outcomes. The findings reveal that the adoption of green technologies such as energy-efficient lighting systems, water conservation technologies, smart energy management systems, and renewable energy sources significantly enhances facility performance. The results further show that these technologies contribute to reduced operational costs, improved indoor environmental quality, and increased maintenance efficiency. Despite these benefits, barriers such as high initial investment costs, inadequate technical expertise, and inadequate institutional policy hinder widespread adoption. The study provides practical implications for policymakers and facility managers by emphasizing the value of green technology integration. It recommends the implementation of supportive policies, capacity-building initiatives, and financial incentives to accelerate adoption and ensure sustainable facility management in public buildings.
- References
- Downloads
- Published
- 13-08-2026
- Section
- Articles
- License
-
Copyright (c) 2026 Ayobami O. IDOWU (Author)

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Abdulrasheed MUSTAPHA, Kolawole O. MORAKINYO, Seyi O. FARODOYE, Rilwan B. HABEEB, Oluwatimilehin I. ADEBAMBO, Sunday F. OLAWALE, Evaluation of Green Architectural Strategies for Thermal Comfort in Four-Star Hotels in Nigeria , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Yusuf M. YAHAYA, Factors Contributing to the Erosion of Freehand Sketching Competence in Technology Education: A Case Study of Bayero University, Kano , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- George AKWEC, Segun E. ADEBAYO, Caroline O. ALENOGHENA, Design and Construction of Forced-Air Heating systems for Poultry Brooding: A Comprehensive Review , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Habib I. ABDULAZEEZ, Bala ABDULLAHI, Abdullahi AHMED, Ibrahim A. TUKUR, Experimental Investigation of Solar Photovoltaic Tilt Angles for Maximum Energy Harvest in Kogi State, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Ibrahim A. KUTI, Sunday E. OGUNMOLA, Peter A. ADEOYE, Evaluation of the Agricultural Best Management Practices (ABMPs) and Their Effect on Discharge Reduction of Shiroro Dam Site using SWAT Model , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Adekunle O. ADEWOLE, Ayodeji O. ARIYO, Development of an Edge-Enabled IoT Smart Energy Meter with Artificial Intelligence (AI)-Based Load Prediction for Device-Level Monitoring , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Abubakar S. MOHAMMED, Mohammed ALIYU, Mohammed U. GARBA, Ibrahim S. MOHAMMED, Ibrahim A. KUTI, Meshack S. IMOLOGIE, Umaru MUSA, Olalekan D. ADENIYI, Peter A. ADEOYE, Abubakar G. ISAH, Folarin T. OLORUNMOTITO, Development and Packaging of Eco-friendly Biosolid Briquettes Synthesised with Bagasse for Green Energy Generation and Utilisation , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Adegoke P. ADEBOLA, Abubakar S. MOHAMMED, Umaru MUSA, Abubakar A. IBRAHIM, Abubakar G. ISAH, Mohammed U. GARBA, Development of Coconut Shell Hydrochar for Lead Removal from Pharmaceutical Wastewater , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Mathew O. ADEOTI, Victor N. HARUNA, Omolayo M. IKUMAPAYI, Timothy A. ADEKANYE, Development and Characterization of Epoxy-Based Asbestos-Free Brake Pad Composites Reinforced with Cow Hoof Particulates , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Tunji J. ERINLE, Daniel C. UGURU-OKORIE, Abiodun M. ADEBIMPE, Adeolu A. ADEDIRAN, Hilary U. EZEA, A Comprehensive Review of In-Situ Monitoring and Post-Process Defect Detection in Additive Manufacturing , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
You may also start an advanced similarity search for this article.
