Awareness of the Availability and Use of Domestic Control Systems and Automation among the University of Benin Resident Staff
- Authors
-
-
Anthony U. AINETOR
Author
-
Martins ILEVBARE
Author
-
- Keywords:
- Awareness, Availability, Challenges, Domestic control systems, Automation.
- Abstract
-
This research focuses on the awareness, availability, and use of domestic control systems among University of Benin resident staff. It emphasized on the importance of domestic control and automation system in places of residence together with the essence of awareness regarding its use. Survey method was the research design used. A total of 30 resident staffs from University of Benin was used as the population. Four research questions were used for this research. A reliability of 0.82 by test-retest method was obtained from a thirteen-item questionnaire used to gather data. Data were analyzed using the mean. Findings revealed high awareness of smart security systems, lighting, and home assistants, but lower awareness of less common technologies like smart thermostats. Availability and use of smart home devices were moderate, with cost, unstable electricity, and cyber security concerns identified as major barriers. Despite these challenges, respondents had a positive perception of home automation and expressed willingness to adopt it if costs were reduced and infrastructure improved. The study recommends government support, awareness campaigns, affordability measures, and enhanced cyber security to boost adoption of smart home technologies in Nigeria.
- References
- Downloads
- Published
- 30-06-2026
- Section
- Articles
- License
-
Copyright (c) 2026 Anthony U. AINETOR, Martins ILEVBARE (Author)

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Muhammad M. HAMIDU, Abubakar M. EL-JUMMAH, Muhammad SHUWA, An Assessment of Power Sources for Improved Energy Supply in University of Maiduguri , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Mokọ́ládé JOHNSON, Bashir SALIM, Enobong EQUERE, Miriam I. CHUKWUMA-UCHEGBU, Emma EKPO, Ali B. ABDULSALAM, Conserving Indigenous Geometries: A Vital Approach to Integrating Cultural Heritage into Architectural Education , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Mu’azu ABUBAKAR, Abubakar B. ALIYU, Dauda GARBA, Fabrication, Characterization, and Application of Clay-Based Ceramic Membranes for Oily Wastewater Treatment: A Review , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Jafaru A. MOHAMMED, Thomas N. GUMA, Malachy SUMAILA, Mahdi MAKWAYO, A Review of Local Manufacturing of Borehole Windmill Gear Trains Using Reverse Engineering and Integrated Braking Systems , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Muazu D. ZAKARI, Md R. KAMAL, Wada I. MUHAMMAD, Nuraddeen M. NASIDI, Dahiru MOHAMMED, Agro-Hydrological Modelling Systems in Peninsula Malaysia: A Comprehensive Review and a Guide towards Model Development , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Nafisa A. ABDULHAMID, Danladi D. USMAN, Kabiru I. JAHUN, Rotkangmwa J. SATI, Yahaya U. JAURO, Abdulmajid M. HASHIR, Yusuf G. SHIMBURA, Development of a Solar Dryer with Multi-Products and a Residual Moisture Control System , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Daniel N. MBACHIRIN, David E. ABEL, Paul A. OMALE, Precision Agriculture Technologies for Smallholder Farming Systems in Developing Countries: A Scoping Review of Opportunities, Limitations and Future Directions , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Francis O. BOROKINNI, Olarewaju T. OGINNI, Ridwan O. RAJI, Kolawole ALONGE, Effects of Quenching Media and Heat Transfer Rate on the Hardness and Microstructure of Low-Carbon Steel , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Emmanuel T. ODEYEMI, Ya’u S. HARUNA, Ganiyu A. BAKARE, Hassan B. MAMMAN, Sabo M. HASSAN, Software-in-the-Loop Validation of an Adaptive Particle Swarm Optimization-Based MPPT Controller for Real-Time Photovoltaic System , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Muhammed A. ADAWUDI, Danlami MALIKI, Ibrahim M. ABDULLAHI, Electric Fish Optimizer-Based Hyperparameter Tuning of MLP for Fault Diagnosis in Grid-Connected Photovoltaic Systems , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
You may also start an advanced similarity search for this article.
Most read articles by the same author(s)
- Anthony U. AINETOR, Martins ILEVBARE, Machine Fabrication Student’s Self-Esteem and Interest in Career Choice as Correlates of their Entrepreneurial Intention in Nigerian Universities , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
