Evaluation of Green Architectural Strategies for Thermal Comfort in Four-Star Hotels in Nigeria
- Authors
-
-
Abdulrasheed MUSTAPHA
Author
-
Kolawole O. MORAKINYO
Author
-
Seyi O. FARODOYE
Author
-
Rilwan B. HABEEB
Author
-
Oluwatimilehin I. ADEBAMBO
Author
-
Sunday F. OLAWALE
Author
-
- Keywords:
- Thermal comfort, green architecture, passive design, hotels, Nigeria, RII, regression.
- Abstract
-
Thermal comfort is a critical component of indoor environmental quality in hot–humid climates, where building performance is strongly influenced by passive design strategies. This study evaluates the effectiveness of green architectural strategies in enhancing thermal comfort in four-star hotels in Nigeria. A qualitative descriptive approach supported by field measurements and structured observational analysis was adopted. Twenty (20) purposively selected hotels in Lagos, Abuja, Kano, and Kaduna were assessed using an observation checklist focusing on building orientation, shading devices, natural and cross ventilation, landscape integration, and green roof systems. Data were analyzed using descriptive statistics, Relative Importance Index (RII), and regression analysis. Findings show that building orientation and shading devices recorded the highest adoption (75%; RII = 0.75), followed by natural ventilation and landscape integration (70%; RII = 0.70), while green roofs were minimally adopted (20%; RII = 0.20). The overall adoption level was moderate, indicating partial integration of passive strategies. Regression results revealed a strong positive relationship between green architectural strategies and thermal comfort (R = 0.91; R² = 0.83), with the model statistically significant (F = 48.80, p = 0.002), confirming that 83% of thermal comfort variation is explained by strategy adoption. The study concludes that while passive design strategies enhance thermal comfort, their fragmented implementation limits performance. Integrated application is required to improve indoor comfort and reduce reliance on mechanical cooling in Nigerian hotels.
- References
- Downloads
- Published
- 01-07-2026
- Section
- Articles
- License
-
Copyright (c) 2026 Abdulrasheed MUSTAPHA, Kolawole O. MORAKINYO, Seyi O. FARODOYE, Rilwan B. HABEEB, Oluwatimilehin I. ADEBAMBO, Sunday F. OLAWALE (Author)

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Chinemeogo C. OZIOKO, Ikechukwu C.-E. IKE-EZE, Nnanyelugo O. EDWIN, Dimelu K. EBUBE, Charles MBOHWA, Investigation of the Mechanical and Thermal Properties of Waste Toner Powder Reinforced Polyester Composite for Industrial Applications , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Chukwuemeka S. IBEH, Abubakre O. KAMARDEEN, Saka A. ABDULKAREEM, Aliyu A. ABDULLAHI, Experimental Study on the Characterisation and Thermo-Physical Properties of Graphene-Agro Based Hybrid Nanofluids , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Sarafa ISHOLA, Olusegun S. OLAOYE, Adeyinka A. ADEGBOLA, Isaac A. OLUREMI, Oluseye O. AGBEDE, Drying Kinetics and Combustion Characteristics of Carbonized Cashew Nut Shell Briquettes Under Open Sun, Passive and Active Solar Drying , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Benjamin T. ABUR, Abubakar A. WARA, David ISAH, Mary D. IGBUR, Catherine N. KWAGHMANDE, Co-Gasification of Sugarcane Bagasse and Coal: A Study on Thermal Characteristics and Efficiency , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Kazeem A. BELLO, Adeniyi O. ADESINA, Lukman A. OPEYEMI, Solomon O. UVIASE, Francis O. BOROKINNI, Friday ONUH, Tunde O. OGUNDANA, Adebayo I. OLUMOROTI, Developments and Applications of Additive Manufacturing in the Automotive Industry , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Yahaya U. JAURO, Danladi D. USMAN, Lawan G. ABUBAKAR, Yusuf G. SHIMBURA, Aminu MOHAMMED, Design and Fabrication of Tapered Screw Briquetting Machine , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Michael R. ADU, Blessing O. UMUKORO, Design and Construction of a 1.5 kVA Pure Sine Wave Inverter for Office Use , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Samuel E. CHUKWU, Martins Y. OTACHE, Precious O. ATEMOAGBO, Emmanuel O. AGBESE, Copula-Based Modelling of Drought Severity-Duration-Frequency Relationship of Sokoto-Rima-River Basin, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Abdulrahman S. USMAN, Folorunsho ABERUAGBA, Moses A. OLUTOYE, Umar MUSA, Mohammed ALHASSAN, Calcium Oxide Derived from Okpella Limestone as a Heterogeneous Catalyst for Biodiesel Production: Synthesis, Characterisation and Stability Assessment , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Yetunde M. ALADEITAN, Damilola V. ABRAHAM, A Data-Driven Surrogate Framework for Economic Optimization of Thin Oil Rim Developments: A Comprehensive Methodological Review and Niger Delta Application , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
You may also start an advanced similarity search for this article.
