Evaluation of Green Architectural Strategies for Thermal Comfort in Four-Star Hotels in Nigeria
- Authors
-
-
Abdulrasheed MUSTAPHA
Author
-
Kolawole O. MORAKINYO
Author
-
Seyi O. FARODOYE
Author
-
Rilwan B. HABEEB
Author
-
Oluwatimilehin I. ADEBAMBO
Author
-
Sunday F. OLAWALE
Author
-
- Keywords:
- Thermal comfort, green architecture, passive design, hotels, Nigeria, RII, regression.
- Abstract
-
Thermal comfort is a critical component of indoor environmental quality in hot–humid climates, where building performance is strongly influenced by passive design strategies. This study evaluates the effectiveness of green architectural strategies in enhancing thermal comfort in four-star hotels in Nigeria. A qualitative descriptive approach supported by field measurements and structured observational analysis was adopted. Twenty (20) purposively selected hotels in Lagos, Abuja, Kano, and Kaduna were assessed using an observation checklist focusing on building orientation, shading devices, natural and cross ventilation, landscape integration, and green roof systems. Data were analyzed using descriptive statistics, Relative Importance Index (RII), and regression analysis. Findings show that building orientation and shading devices recorded the highest adoption (75%; RII = 0.75), followed by natural ventilation and landscape integration (70%; RII = 0.70), while green roofs were minimally adopted (20%; RII = 0.20). The overall adoption level was moderate, indicating partial integration of passive strategies. Regression results revealed a strong positive relationship between green architectural strategies and thermal comfort (R = 0.91; R² = 0.83), with the model statistically significant (F = 48.80, p = 0.002), confirming that 83% of thermal comfort variation is explained by strategy adoption. The study concludes that while passive design strategies enhance thermal comfort, their fragmented implementation limits performance. Integrated application is required to improve indoor comfort and reduce reliance on mechanical cooling in Nigerian hotels.
- References
- Downloads
- Published
- 01-07-2026
- Section
- Articles
- License
-
Copyright (c) 2026 Abdulrasheed MUSTAPHA, Kolawole O. MORAKINYO, Seyi O. FARODOYE, Rilwan B. HABEEB, Oluwatimilehin I. ADEBAMBO, Sunday F. OLAWALE (Author)

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Tina I. FRANCIS-AKILAKI, Onimi O. ASHAMA, Raymond A. EKEMUBE, Vibration Analysis as a Transformative Approach to Condition-Based Monitoring , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Joseph O. AJAYI, Adekunle T. ADENIYI, Mufliah G. OMOFOYEWA, Abel A. ADEYI, Abdulwahab GIWA, Evaluation on the Rheological Properties of Water-Based Drilling Mud: A Case Study of Ire-Ekiti Clay , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Adefemi O. ADEODU, Banjo C. ADEDOKUN, Amos A. ADEGBITE, Development and Performance Evaluation of an Injection Moulding Machine for Recycled Polymer Composite Production , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Jamesmary E. AYANRU, Matthew S. ABOLARIN, Omotayo I. OGUNWEDE, Henry I. MORKAH, Adeshola O. OPENIBO, Development and Performance Evaluation of a Dryer for Preserving Vegetable Leaves , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Ahmad IDRIS, Evaluation of Challawa Tannery Wastewater as Mixing and Curing Water for Concrete Production , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Abubakar L. IBRAHEEM, John K. ALHASSAN, Noel D. MOSES, Suleiman AHMAD, Development of Ensemble SVM–LSTM Model for Phishing Website Detection , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Ojochide P. DAMIAN, Fadimatu N. DABAI, Abdulwasiu ABDURRAHMAN, Kamiludeen OLANREWAJU, Bilyamin ABDULMUMIN, Grace A. OLUGBENGA, A Simulation-Driven Strategy for Improved Expandable Polystyrene Synthesis via Multi-Stage Initiator Dosing , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Chioma I. MADUEKE, Reginald UMUNAKWE, Oluwole D. ADIGUN, An Evaluation of the Porosity and Pore Volume Fractions of Coir Fibres in Relation to Their Diameters and Tensile Properties at a Crosshead Displacement Rate of 0.5 mm/Minute for Composite Applications , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Kamardeen A. OGUNBAJO, Benjamin I. UGHEOKE, Ibrahim D. MUHAMMAD, Emmanuel ONCHE, Application of Upper Bound Analysis and Taguchi Method in Aluminium Extrusion , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Folakemi B. OYEYEMI, Usman A. ABDURRAHMAN, Detecting and Mitigating Cybersecurity Threats in Nigerian Commercial Banks Using Machine Learning: A Case Study of Selected Institutions , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
You may also start an advanced similarity search for this article.
