Potential of Zinc Oxide Nanoparticles for Remediation of Oil-Contaminated Soil and Water
- Authors
-
-
Yetunde M. ALADEITAN
Author
-
Abdulmojeed O. OLUOGUN
Author
-
- Keywords:
- Zinc oxide nanoparticles, oil contamination, photocatalytic remediation, soil remediation, water treatment, hydrocarbon degradation.
- Abstract
-
Long-term impact of oil spills on the environment and on the health and livelihood of people is one of the biggest concerns around the issue of environment in oil producing regions like the Niger Delta region of Nigeria, which has experienced oil spills for years and years; with years of impact on the environment and the health and livelihood of its inhabitants. In many cases, traditional remediation methods—like chemical oxidation using hydrogen peroxide—aren't effective enough, don't have to be intrusive, and aren't practical in resource-limited areas, where there is a need for simpler, sustainable and effective solutions that are readily available. In this work, the synthesis, characterization and photocatalytic application of zinc oxide (ZnO) nanoparticles for the remediation of oil-contaminated soil and water has been studied. Facile precipitation methodology was used for the synthesis of nanoparticles and its characterization was done by Fourier Transform Infrared Spectroscopy (FTIR), Ultraviolet-Visible (UV-Vis) spectroscopy, Scanning Electron Microscopy (SEM) and X-ray Diffraction (XRD). FTIR spectrum revealed the presence of Zn-O stretching vibration at ~ 535 cm⁻¹ and sharp absorption peak at 367 nm which corresponds to the Band gap energy of 3.38 eV as revealed by the UV-Vis spectroscopy. SEM image showed good dispersion of the nanoparticles (20-50 nm in diameter) and XRD analysis showed hexagonal wurtzite crystal structure. The photocatalytic remediation experiments under UV exposure resulted in the reduction of total petroleum hydrocarbon (TPH) of 85.1% in water samples, and 76.9% in soil samples, much better than that of the conventional hydrogen peroxide treatment (65.0% for water samples and 68.3% for soil samples). The results revealed that the ZnO nanoparticles were very effective, eco-friendly and were also synthetically scalable which was better than the existing chemical oxidation methods. The current technologies have deficiencies in reducing the impact of hydrocarbons in sensitive area impacted by oil pollution, it is a scientific solution that is theoretically sound and practically viable.
- References
- Downloads
- Published
- 01-07-2026
- Section
- Articles
- License
-
Copyright (c) 2026 Yetunde M. ALADEITAN, Abdulmojeed O. OLUOGUN (Author)

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Sirajo ALHASSAN, Abdullahi A. ADAMU, Mohammed T. JIMOH, Multi-Criteria Decision Analysis and Optimization Approaches in Sustainable Waste-to-Energy Planning: A Systematic Review , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Oluwaseun S. OGUNGBEMI, Geophysical Approach to Groundwater Resource Appraisal in Afe Babalola University, Ado-Ekiti, Southwestern Nigeria , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Sirajo ALHASSAN, Abdullahi A. ADAMU, Mohammed T. JIMOH, Experimental Characterization and Seasonal Energy Potential Assessment of Municipal Solid Waste in Kano City, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Chibuzor A. OKAFOR, Bello ABDULKAREEM, Najeem A. YEKEEN, Blessing A. OSULOYE, Yakubu O. HASSAN, Musa J. MAIKATO, Evaluation of the Effects of Charcoal Particle Sizes on Carburized Low Carbon Steel , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Mohammed A. GANA, Zaka A. MSHELIA, Isuwa S. AJI, Alhaji GUJJA, Lawan A.M. KOLO, Investigation and Comparative Analysis of Natural Moulding Sands from Five Deposits in Maiduguri, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Abubakar A. IBRAHIM, Fatimah Y. GARBA, Fatimah A. MUHAMMAD, Ismail B. ADEFESO, Bello A. ISAH, Jacob OLAYIWOLA, Industrial and Biomedical Applications Biobased Polymers of Polylactic Acid and Polyhydroxybutyrate: A Review , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Kamoru O. OLADOSU, Kabiru MUSTAPHA, Ayodeji S. OLAWORE, Akeem B. IBRAHIM, Abdulganiyu ISSA, Development of a Free-Fall Pyrolysis Reactor for Biofuel Production Using Sugarcane Bagasse and Cassava Rhizomes as Feedstocks , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Ephraim G. KEFAS, Abdulfatai JIMOH, Mohammed A. EVUTI, Abubakar A. IBRAHIM, Abdulwahab GIWA, Adeola G. OLUGBENGA, Luffa Sponge, Banana Stem and Delonix regia Seed Characterization as Potential Biosorbents for Industrial Wastewater Remediation , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Afeez A. AWOLOKUN, Olusegun O. ALUKO, Temitope F. AWOLUSI, Mayowa A. OGIDI, Performance Evaluation of Pervious Concrete Containing Glass Cullet and Glass Powder for Sustainable Construction , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Benjamin T. ABUR, Abubakar A. WARA, David ISAH, Mary D. IGBUR, Catherine N. KWAGHMANDE, Co-Gasification of Sugarcane Bagasse and Coal: A Study on Thermal Characteristics and Efficiency , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
You may also start an advanced similarity search for this article.
Most read articles by the same author(s)
- Yetunde M. ALADEITAN, Damilola V. ABRAHAM, A Data-Driven Surrogate Framework for Economic Optimization of Thin Oil Rim Developments: A Comprehensive Methodological Review and Niger Delta Application , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Yetunde M. ALADEITAN, Damilola V. ABRAHAM, Abdulmojeed O. OLUOGUN, Abdulwasiu ABDURRAHMAN, A Critical Review of Surrogate Reservoir Modelling for Uncertainty Quantification in Thin Oil Rim Reservoirs , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
