From Local Sand to Functional Silicon: An Integrated Pathway for Producing Photovoltaic-Grade Material from Nigerian Silica Sand
- Authors
-
-
Tahiru MOHAMMED
Author
-
Muhammad B. MAINA
Author
-
Abba B. MUHAMMAD
Author
-
Muhammad SHUWA
Author
-
- Keywords:
- Silica sand, purification, carbothermic reduction, upgraded metallurgical-grade silicon (UMG-Si), photovoltaic, local content, Nigeria.
- Abstract
-
Nigeria's significant solar energy potential is constrained by a reliance on imported high-purity silicon, despite abundant indigenous silica sand resources. This study presents a complete, integrated experimental pathway to assess the feasibility of producing photovoltaic-grade silicon from River Alau sand in Borno State. The research encompasses: Comprehensive characterization of raw sand using XRF, XRD, and SEM/EDX; Purification via optimized acid leaching (acid was used to remove impurities) and calcination; Carbothermic reduction at a temperature of 1700◦C was carried out to transform the sample to a metallurgical-grade silicon (MG-Si) and subsequent directional solidification; Evaluation of the electrical and optical properties of the upgraded silicon; and Fabrication and outdoor performance testing of simple solar cells under Maiduguri conditions. The raw sand contained 77.63% SiO₂ with significant impurities (Al₂O₃: 2.10%, K₂O: 6.31%). Purification achieved ≥99.6% SiO₂ purity, reducing key metallic impurities to <0.1%. Carbothermic reduction yielded MG-Si with 78% efficiency, and the upgraded material exhibited suitable properties for PV applications: a resistivity of 4.2 Ω•cm and a band gap of 1.12 eV. Fabricated solar cells generated an open-circuit voltage of 0.48–0.52 V. A preliminary economic analysis suggests a 25–30% potential cost saving in raw material sourcing. This work provides the first proof-of-concept for a viable domestic value chain from Nigerian silica sand to functional photovoltaic silicon, demonstrating technical feasibility and supporting the development of local solar manufacturing capabilities.
- References
- Downloads
- Published
- 29-06-2026
- Section
- Articles
- License
-
Copyright (c) 2026 FUDMA Journal of Engineering and Technology

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Emmanuel O. AGBENYI, Adefope OWOJORI, Oluwadare J. AKINDUGBAGBE, Babatunde ADEBO, Chigbo I. OKEREKE, Impact Assessment of Natural Radionuclides in Cassava Tubbers Harvested from a Farmlands Around Quarry in Moniya Ibadan, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Ndagi MAMUDU, Ibrahim S. MOHAMMED, Mohammed ALIYU, Peter DANIEL, Timothy Y. AKANDE, Bala A. GARBA, Development and Performance Evaluation of Biomass Pyrolysis System for Biofuel Production , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- James AUDU, Abdulraman A. SALAWU, Muriana R. AREMU, Abdullahi A. ALHAJI, Lawal S. SIUS, Characterisation of Pumice-Kaolin Refractory Bricks for High Temperature Industrial Applications , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Muhammad M. HAMIDU, Mathew KATAMBI, Omar FARUQ, Techno-Economic and Environmental Assessment of a Solar PV-Based Microgrid for Residential Electrification in Gwange I, Maiduguri Using HOMER Pro , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Ibrahim BALA, Solomon M. DAUDA, Audu A. BALAMI, Peter A. IDAH, Design Analysis of a Kenaf Decorticating Machine , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Paramdi S. ABARI, Abdulwahab O. AUDU, Ahmad-Tijani USMAN, Charity T. METIBOBA, Peter O. ANIKOH, Performance Evaluation and Design Analysis of Hybrid Constructed Wetlands for Aquaculture Effluent Treatment under Tropical Conditions , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Tolulope S. FAWALE, Monday O. IMAFIDON, Chukwuemeka P. OGBU, Adoption of Non-Financial Motivational Strategies for Enhancing Productivity on Construction Sites in Edo State, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Danladi K. GARBA, Emmanuel O. AWEDA, Nuhu A. ADEMOH, Fredrick NGOLEMASANGO, Pascal A. UBI, Akor TERNGU, Lawal KABIR, Shuaibu O. YAKUBU, The Effects of Gum Arabic Matrix on the Hardness and Water Absorption of Agro-Based (Banana Pseudostem) Hybrid Composites , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Benjamin BELLO, Jibril D. JIYA, Aje TOKAN, Ahmed MOHAMMED, Classification of Groundnut Pod Varieties using Histogram-Based Gradient Booster Classifier (HGBC) with Machine Learning Techniques , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Adekunle O. ADEWOLE, Ayodeji O. ARIYO, Development of an Edge-Enabled IoT Smart Energy Meter with Artificial Intelligence (AI)-Based Load Prediction for Device-Level Monitoring , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
You may also start an advanced similarity search for this article.
