Assessment of Radio-Frequency Radiation Levels from Cellular Base Transceiver Stations in Residential Areas and Their Potential Health Effects on Humans
- Authors
-
-
Adesoye S. ADEGOKE
Author
-
Lateef A. OTEGBEYE
Author
-
Olufemi S. SONEYE
Author
-
Oluwole O. GREEN
Author
-
Patrick O. OLABISI
Author
-
- Keywords:
- Base Transceiver Station (BTS), Electromagnetic Radiation, Power Density, Specific Absorption ratio (SAR).
- Abstract
-
The exponential growth in need for cellular mobile communication has resulted in a significant increase in the number of base transceiver stations across the country. These base transceiver stations are known to emit electromagnetic radiations and some are located very close to residential areas. This proximity to residential areas has prompted a heightened public and scientific concern over the potential health hazard of electromagnetic radiations from base stations on human body. This research work has carried out experimental investigations aimed at estimating levels of radiations from selected base stations and evaluate their potential health risk associated with the exposure. A handheld transmogmeter was used to measure power densities across selected base transmitter stations within some densely populated areas in Ikorodu area of Lagos State. Results of our investigation show an average measured values within the ranges of 0.0064w/m2 to 0.0187w/m2. This is considered extremely low when compared with exposure safety level as recommended by International Commission on Non Ionizing Radiation Protection. From our results, it can be inferred that no significant health hazard may arise as a result of radiation exposure on human body within the limit of our experimental data.
- References
- Downloads
- Published
- 26-06-2026
- Section
- Articles
- License
-
Copyright (c) 2026 FUDMA Journal of Engineering and Technology

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Paul A. OMALE, Hammed O. SALAUDEEN, Sunday S. IGILA, Enoch T. CHIN, Determination of the Physicochemical Composition of Processed Powdered Pepper (Capsicum spp.) Sold in Selected Markets in Makurdi, Benue State, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Abubakar M. ALI, Haruna IBRAHIM, Ephraim G. KEFAS, Thermal Plasma Gasification of Municipal Solid Waste: Principles, Technological Advances, Challenges, and Future Prospects , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Koliya LAAYE, Solomon O. OGUCHE, Ibrahim I. JIDDA, Abdullahi A. ADAMU, Economic Viability of Waste-to-Energy: Pathways for Sustainable Power Generation in Jalingo, Taraba State, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Ameh RICHARD, Sani B. MUHAMMAD, Terver AUSE, Umar SHEHU, Assessment of the Suitability of Wusasa Clay for Refractory Bricks Production , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Olawale J. OLALUYI, Johnson O. ADEOGO, Aduragbemi F. OJO, Olarewaju T. OGINNI, Design and Construction of Transistor Based Water Level Indicator Tank with Overflow Alarm , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Adedeji O. ADEBARE, Olayinka O. OLUSANYA, Ademola A. OMILABU, Iyinoluwa T. IDOWU, Jímọ̀h À. HASSAN, Peter A. IDOWU, A Hybrid BioBERT-BiLSTM Model for Sentiment Analysis of Malaria Drug Reviews in Pharmacovigilance , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Muhammad B. MUHAMMAD, Noor S. B. MANSOR, Fariha R. KHAN, Investigating Breakdown Strength Based on Trapping Profile in Cross-Linked Polyethylene (XLPE) Nanocomposites , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Yahaya U. JAURO, Danladi D. USMAN, Lawan G. ABUBAKAR, Yusuf G. SHIMBURA, Aminu MOHAMMED, Design and Fabrication of Tapered Screw Briquetting Machine , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Abdulkareem BELLO, Saleh S. LUKMAN, Tasie M. CHIZE, Yusuf O. ADEIZA, Chibuzor A. OKAFOR, Abdullahi O. YAKUBU, Design, Simulation, and 3D Printing of a Lightweight Drone Frame for Farm Monitoring , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Suleiman ZUBAIR, Hassan ABDULAZEEZ, Bala A. SALIHU, Abubakar A. SHUAIBU, Design and Implementation of a BLE 5.0-Enabled Wearable Finger Mouse Using the XIAO nRF52840 Platform , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
You may also start an advanced similarity search for this article.
