A Data-Driven Surrogate Framework for Economic Optimization of Thin Oil Rim Developments: A Comprehensive Methodological Review and Niger Delta Application
- Authors
-
-
Yetunde M. ALADEITAN
Author
-
Damilola V. ABRAHAM
Author
-
- Keywords:
- Thin Oil Rim; Surrogate Reservoir Model; Uncertainty Quantification; Experimental Design; Machine Learning; Integrated Reservoir Management.
- Abstract
-
Reservoirs with a thin oil rim where the hydrocarbon column is in danger of being breached by an active aquifer and gas cap is a long term optimization problem. Sour gas and water coning significantly impact recovery profits, and uncertainty underground makes development decisions challenging. The large number of scenarios and uncertainties involved in a robust field development plan cannot be sufficiently addressed through the traditional simulation-intensive processes. In this paper, a framework of the Surrogate Reservoir Model (SRM) is proposed and consists of three elements: the statistical design, the machine learning proxy modeling, and the economic analysis. The methodology includes the sequential experimental design for parameter screening, high-dimensional response surface and machine learning for proxy construction and Monte Carlo forecasting for probabilistic predictions. For a case study in the Niger delta, the key uncertainties identified are the permeability anisotropy, oil column height, and horizontal permeability. Seven development options have been investigated using a probabilistic analysis and it is found that the one with the greatest technical recovery is not economically best. The framework was able to enable economics-based decision making, such as simultaneous oil and gas production which show the best value of Net Present Value and Internal Rate of Return.
- References
- Downloads
- Published
- 26-06-2026
- Section
- Articles
- License
-
Copyright (c) 2026 FUDMA Journal of Engineering and Technology

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Onyeka E. NNANYELUGO, Peter O. OFFOR, Cyril OCHERI, Camillus S. OBAYI, Optical and Structural Properties of Er/Sr Co-Doped αMnS Films Prepared by Chemical Spray Pyrolysis , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Luqman K. SALATI, Sani D. MUHAMMAD, Jacob T. ADEYEMO, Simulation of Trucks Haulage Operation at Ashaka Cement Company in Gombe State, North-Eastern Nigeria , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Bala I. ABDULKARIM, Yusuf M. BABA, Suleiman I. ENEHE, Kamoru A. SALAM, Umar IDRISS, Synthesis of Activated Carbon from Corncob for the removal of Lead (Pb²⁺) ions from Aqueous solution using a packed bed Adsorption Column , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Cyril OCHERI, Victor S. AIGBODION, Esther O. AMEH, Ihebuchuwu C. EZEAKU, Chibuikem A. OKAFOR, Uchenna C. AMAZUE, Eddy R. OMONIGHO, Electrochemical Analysis of Azadirachta indica Leaves as a Corrosion inhibitor on Mild Steel in 1 M H2SO4 , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Cletus C. OPUTE, Obumneme O. OKWONNA, Comparative Analysis on the Efficiencies of Unmodified Clay and Microorganism-Modified Clay as Adsorbent for the Adsorption of Lead (II) Ions from Wastewater , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Olabanji M. KADI, Sustainability in Construction: A Quantity Surveyor's Perspective on Green Building Practices , FUDMA Journal of Engineering and Technology: Vol. 1 No. 1 (2025): July 2025
- Abimbola J. KOLAWOLE, AbdulKodri G. ABDULRAFIU, An Evaluation of the Challenges and Limitations in the Adoption of Technological Innovations at Nnamdi Azikiwe International Airport , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Taiwo J. DURODOLA, Suleiman ZUBAIR, James AGAJO, Open Radio Access Network (ORAN) Deployment Strategies for Remote Areas , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Chukwuemeka S. IBEH, Abubakre O. KAMARDEEN, Saka A. ABDULKAREEM, Aliyu A. ABDULLAHI, Experimental Study on the Characterisation and Thermo-Physical Properties of Graphene-Agro Based Hybrid Nanofluids , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Olarewaju T. OGINNI, An Overview of Unmanned Aerial Vehicles Technologies for Office Use and Services Delivery , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
You may also start an advanced similarity search for this article.
Most read articles by the same author(s)
- Yetunde M. ALADEITAN, Damilola V. ABRAHAM, Abdulmojeed O. OLUOGUN, Abdulwasiu ABDURRAHMAN, A Critical Review of Surrogate Reservoir Modelling for Uncertainty Quantification in Thin Oil Rim Reservoirs , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Yetunde M. ALADEITAN, Abdulmojeed O. OLUOGUN, Potential of Zinc Oxide Nanoparticles for Remediation of Oil-Contaminated Soil and Water , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
