Impact of Health and Safety Management on Safety Performance of Small and Medium-Sized Construction Firms in Abuja
- Authors
-
-
Habibat O. YUSUFU
Author
-
Yakubu D. MOHAMMED
Author
-
Rose JONATHAN
Author
-
Shamsuddeen SULAIMAN
Author
-
- Keywords:
- Health and safety, Impact, management, Safety performance, Small and medium-sized construction firms.
- Abstract
-
The construction industry is one of the most hazardous sectors, with frequent accidents, injuries, and fatalities resulting from unsafe practices and inadequate health and safety management (HSM). This has led to negative impacts such as project delays, increased costs, reduced productivity, and reputational damage. In order to address this problem, this study assessed the health and safety management practices adopted by small and medium-sized construction firms (construction SMEs) in Abuja with a view to improving safety standards in SMEs. Data collection was undertaken using structured questionnaires administered to 120 construction professionals across various disciplines. Analysis of data was conducted using Mean Item Score (MIS), Relative Importance Index (RII), and Spearman Rank (rho) correlation. Findings from the analysis revealed that the most important HSM adopted by SMEs are “health and safety (H&S) policy” (MIS = 4.68); “H&S culture” (MIS = 4.65); and “H&S education” (MIS = 4.60). The least ranked practices were “Organisation records” (MIS = 3.67) and “Employee involvement/influence” (MIS = 3.62). The RII results revealed that reduction in workplace accidents and injuries margin (RII = 0.84), improved safety culture (RII = 0.81), and enhanced compliance with regulatory standards (RII = 0.79) were the key practices that most significantly impact project performance. Conversely, lower compensation insurance (RII = 0.59), reduced absenteeism (RII = 0.61), and increased client satisfaction (RII = 0.63) were ranked lowest but were still statistically significant, as their p-values were less than 0.05. The study concludes that HSM practices have a significant effect on the performance of small and medium-sized construction projects in Abuja. It was therefore recommended that construction stakeholders should strengthen safety policies and culture, enhance worker involvement, promote government support for training, and enforce regulatory compliance in order to achieve safer and more efficient construction project delivery.
- References
- Downloads
- Published
- 01-06-2026
- Section
- Articles
- License
-
Copyright (c) 2026 FUDMA Journal of Engineering and Technology

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Abdulrahman B. GAMBO, Carbon Capture and Mechanical Design of Membrane Reactors: A Systematic Review and Design-Performance Framework for Sustainable Energy Systems , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Adefemi O. ADEODU, Banjo C. ADEDOKUN, Amos A. ADEGBITE, Development and Performance Evaluation of an Injection Moulding Machine for Recycled Polymer Composite Production , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Olatunde A. AKANO, Wariz A. ISMAEL, Ayomikun A. AWOSEYI, Femi AYO, Ifeoluwa M. OLANIYI, Jide E.T. AKINSOLA, Short Messaging Service Spam Detection Model Using Natural Language Processing and Deep Learning Techniques , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Emmanuel T. ODEYEMI, Ya’u S. HARUNA, Ganiyu A. BAKARE, Hassan B. MAMMAN, Sabo M. HASSAN, BAT-Optimized PID and ANFIS Torque-Based MPPT for a 0.5 MW PMSG-Based Wind Energy Conversion System Under Dynamic Wind Conditions , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Abubakar D. ADO, Aminu D. MAHMUD, Jamilu HARUNA, Sadiq S. DODO, Abdullahi YAHAYA, Development of Enhanced Coal Briquettes for Domestic Cooking Applications in Nigeria , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Enoch ADETONA, Oladiran K. ABUBAKRE, Rasheed A. MURIANA, Muhammad N. BALA, Abel A. ADEYI, Evaluation of Animal Dungs as Alternative Heat-Treating Materials in Foundry Shop , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Aminu D. MAHMUD, Imran N. IBRAHIM, Development and Optimization of Starch-Based Bioplastics from Millet and Cassava Using Mixture Design Approach , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Isaac O. UKRAKPO, Osemwegie IKPONMWOSA-EWEKA, Prediction of Weld Strain Using Artificial Neural Network: A Modeling Approach , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Benjamin BELLO, Jibril D. JIYA, Aje TOKAN, Ahmed MOHAMMED, Classification of Groundnut Pod Varieties using Histogram-Based Gradient Booster Classifier (HGBC) with Machine Learning Techniques , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Mohammed K. BASHIR, Sanusi A. DARMA, Usman MAHMUD, Mansir ABUBAKAR, Enhanced Breast Cancer Classification Using Ensemble Learning and Data Resampling Techniques: A Machine Learning Approach , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
You may also start an advanced similarity search for this article.
