Performance Evaluation and Design Analysis of Hybrid Constructed Wetlands for Aquaculture Effluent Treatment under Tropical Conditions
- Authors
-
-
Paramdi S. ABARI
Author
-
Abdulwahab O. AUDU
Author
-
Ahmad-Tijani USMAN
Author
-
Charity T. METIBOBA
Author
-
Peter O. ANIKOH
Author
-
- Keywords:
- Hybrid constructed wetlands, aquaculture wastewater, horizontal subsurface flow, vertical subsurface flow, pollutant removal efficiency, sustainable wastewater treatment.
- Abstract
-
Aquaculture wastewater discharge has become a significant environmental concern because of the release of nutrient-rich effluents into natural water bodies. This study evaluated the treatment performance and design efficiency of a laboratory-scale hybrid constructed wetland (HCW) system developed for aquaculture effluent treatment under tropical climatic conditions. The hybrid system consisted of horizontal subsurface flow (HSSF) and vertical subsurface flow (VSSF) wetland units operated under planted and unplanted conditions using Sacciolepis africana as the test macrophyte. Aquaculture wastewater was collected from Musgola Fish Farm located in Minna, Niger State, Nigeria, and monitored over a 23-week experimental period. Physicochemical parameters including biological oxygen demand (BOD5), chemical oxygen demand (COD), total suspended solids (TSS), total dissolved solids (TDS), total nitrogen (TN), sulphate (SO4²⁻), and calcium (Ca²⁺) were analyzed using standard APHA methods. Hydraulic retention time, hydraulic loading rate, porosity, and wetland dimensions were incorporated into the wetland design calculations. Results showed that the planted VSSF unit recorded the highest pollutant removal efficiencies of 90.1% for BOD5, 88.2% for COD, 77.7% for TSS, 58.2% for TDS, and 57.4% for TN. Statistical analysis using one-way ANOVA indicated significant differences (p < 0.05) between planted and unplanted systems. The study demonstrates that hybrid constructed wetlands provide an efficient, low-cost, and environmentally sustainable technology for aquaculture wastewater treatment in developing countries.
- References
- Downloads
- Published
- 23-05-2026
- Section
- Articles
- License
-
Copyright (c) 2026 FUDMA Journal of Engineering and Technology

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Lawal B. IDRIS, A Review on Vehicular Ad Hoc Network (VANET) Security challenges and Solutions , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Ibrahim A. KUTI, Sunday E. OGUNMOLA, Peter A. ADEOYE, Evaluation of the Agricultural Best Management Practices (ABMPs) and Their Effect on Discharge Reduction of Shiroro Dam Site using SWAT Model , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Adebola S. AKOLADE, Precious A. OLAOMOTITO, Abibat Y. ADEBIYI, Oluwatunmise P. ABOLARIN, Opeyemi I. ADETUNJI, Kola OGEDENGBE, Production and Evaluation of Cement-Bonded Composites Board Made from Banana Pseudo Stem , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Peter EDOKA, Assessment of the Role of Kogi State Government in Flood Mitigation in Lokoja, Kogi State, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Aminu D. MAHMUD, Imran N. IBRAHIM, Development and Optimization of Starch-Based Bioplastics from Millet and Cassava Using Mixture Design Approach , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Jamesmary E. AYANRU, Matthew S. ABOLARIN, Omotayo I. OGUNWEDE, Henry I. MORKAH, Adeshola O. OPENIBO, Development and Performance Evaluation of a Dryer for Preserving Vegetable Leaves , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Babagoni A. ADAM, Muhammad B. MAINA, Muhammad SHUWA, Abba B. MUHAMMAD, A Review on Neem Leaves Valorization Through Advanced Briquetting and Carbonization Technologies , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Damilare L. ADEKEYE, Isiyaku SALEH, Yemisi E. AKINSELI, Design and Implementation of an Automatic Gate for Cars at Railway Crossings , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Shamsuddeen J. AHMAD, Saifullahi S. SADI, Muhammad M. AHMAD, Abdullahi D. UMAR, Shamsuddeen USMAN, Comparative Analysis of Machine Learning Algorithms for the Detection and Classification of Suspicious Emails , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Suleiman ZUBAIR, Hassan ABDULAZEEZ, Bala A. SALIHU, Abubakar A. SHUAIBU, Design and Implementation of a BLE 5.0-Enabled Wearable Finger Mouse Using the XIAO nRF52840 Platform , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
You may also start an advanced similarity search for this article.
